환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

Top Notch™ 홈가공

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1688)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1688)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1688)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1688)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1688)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1688)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1688)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1688)
    • M Stainless Steel (1489)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1489)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1489)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1489)
    • K Cast Iron (1319)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1319)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1308)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1308)
    • N Non-Ferrous Materials (1276)
      • N1
        Wrought Aluminum (1268)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1108)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(86)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1276)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1116)
      • N6
        Carbon, Graphite Composites, CFRP (1108)
    • S High-Temp Alloys (1497)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1497)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1497)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1497)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1486)
    • H Hardened Materials (650)
      • H1
        Hardened Materials 44-48 HRC(650)
      • H2
        Hardened Materials 48-55 HRC(476)
      • H3
        Hardened Materials 56-60 HRC(132)
      • H4
        Hardened Materials >60 HRC(132)
    Applications
    Applications
    • Back BoringBack Boring (81)
    • BoringBoring (1168)
    • Face GroovingFace Grooving (1889)
    • FacingFacing (81)
    • GroovingGrooving (1825)
    • ID FacingID Facing (88)
    • ID GroovingID Grooving (1651)
    • ID Thread TurningID Thread Turning (69)
    • OD Thread TurningOD Thread Turning (127)
    • Plunge TurningPlunge Turning (1508)
    • ProfilingProfiling (165)
    • ThreadingThreading (130)
    • TurningTurning (1193)
    Type of Thread
    Type of Thread
    • 60 (187)
    • ACME (122)
    • API (114)
    • API RD (86)
    • BSW (78)
    • BUTTRESS (182)
    • M (114)
    • NPT (78)
    • STUB ACME (78)
    • UN (182)
    • UNJ (78)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1239)
    • Lightly Interrupted Cut (1331)
    • Smooth Cut (1478)
    • Varying Depth of Cut (1539)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (12)
    • 90.0 (186)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (6)
    • Boring Bar Shank (63)
    • Toolholder (90)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (419)
    • 2.0 (1671)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.625 in(6)
    • 2.165 in(1)
    • 2.192 in(1)
    • 2.5 in(4)
    • 2.757 in(2)
    • 3.15 in(2)
    • 3.5 in(4)
    • 3.938 in(4)
    • 4.0 in(3)
    • 4.5 in(16)
    • 4.921 in(11)
    • 5.0 in(16)
    • 5.906 in(21)
    • 6.0 in(39)
    • 6.694 in(10)
    • 7.0 in(2)
    • 7.079 in(2)
    • 7.875 in(4)
    • 7.976 in(1)
    • 8.0 in(5)
    • 9.843 in(2)
    • 9.879 in(1)
    • 10.0 in(8)
    • 11.811 in(4)
    • 12.0 in(8)
    • 13.781 in(1)
    • 14.0 in(10)
    • 16.0 in(10)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 41.276 mm(6)
    • 55.0 mm(1)
    • 55.676 mm(1)
    • 63.5 mm(4)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 88.9 mm(4)
    • 100.0 mm(4)
    • 101.601 mm(3)
    • 114.301 mm(16)
    • 125.0 mm(11)
    • 127.0 mm(16)
    • 150.0 mm(21)
    • 152.4 mm(39)
    • 170.0 mm(10)
    • 177.8 mm(2)
    • 179.8 mm(2)
    • 200.0 mm(4)
    • 202.601 mm(1)
    • 203.201 mm(5)
    • 250.0 mm(2)
    • 250.925 mm(1)
    • 254.0 mm(8)
    • 300.0 mm(4)
    • 304.8 mm(8)
    • 350.0 mm(1)
    • 355.6 mm(10)
    • 406.401 mm(10)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(78)
    • 0.003 in(192)
    • 0.004 in(306)
    • 0.005 in(78)
    • 0.006 in(114)
    • 0.007 in(191)
    • 0.008 in(1003)
    • 0.01 in(182)
    • 0.011 in(78)
    • 0.012 in(78)
    • 0.014 in(205)
    • 0.016 in(86)
    • 0.019 in(114)
    • 0.02 in(157)
    • 0.023 in(330)
    • 0.03 in(70)
    • 0.031 in(213)
    • 0.033 in(13)
    • 0.035 in(114)
    • 0.039 in(153)
    • 0.047 in(193)
    • 0.049 in(147)
    • 0.06 in(152)
    • 0.062 in(94)
    • 0.063 in(258)
    • 0.069 in(147)
    • 0.078 in(93)
    • 0.079 in(116)
    • 0.089 in(114)
    • 0.095 in(163)
    • 0.098 in(37)
    • 0.125 in(68)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(78)
    • 0.076 mm(192)
    • 0.1 mm(306)
    • 0.125 mm(78)
    • 0.151 mm(114)
    • 0.176 mm(191)
    • 0.2 mm(1003)
    • 0.225 mm(78)
    • 0.25 mm(182)
    • 0.275 mm(78)
    • 0.301 mm(78)
    • 0.325 mm(205)
    • 0.351 mm(114)
    • 0.4 mm(86)
    • 0.45 mm(114)
    • 0.476 mm(40)
    • 0.5 mm(157)
    • 0.576 mm(330)
    • 0.75 mm(70)
    • 0.775 mm(213)
    • 0.826 mm(13)
    • 0.9 mm(114)
    • 1.0 mm(153)
    • 1.201 mm(193)
    • 1.25 mm(147)
    • 1.5 mm(152)
    • 1.576 mm(94)
    • 1.6 mm(258)
    • 1.75 mm(147)
    • 1.975 mm(93)
    • 2.0 mm(116)
    • 2.25 mm(114)
    • 2.401 mm(163)
    • 2.5 mm(37)
    • 3.176 mm(68)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(1716)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(1716)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1 (5)
    • K2885 (146)
    • K313 (231)
    • K420 (216)
    • K4H (110)
    • K68 (303)
    • KB1345 (114)
    • KB1630 (125)
    • KB5625 (78)
    • KBH20 (42)
    • KC250 (151)
    • KC5010 (369)
    • KC5025 (393)
    • KC5410 (186)
    • KC710 (182)
    • KC720 (213)
    • KC722 (182)
    • KC730 (417)
    • KC732 (78)
    • KC810 (198)
    • KC850 (340)
    • KC910 (110)
    • KC9110 (182)
    • KC9120 (78)
    • KC9320 (182)
    • KC935 (182)
    • KC950 (182)
    • KCK20 (152)
    • KCK20B (205)
    • KCP10B (244)
    • KCP25B (290)
    • KCU10 (390)
    • KCU10B (276)
    • KCU25 (464)
    • KCU25B (182)
    • KD050 (40)
    • KD081 (78)
    • KD100 (97)
    • KD120 (114)
    • KD1425 (86)
    • KT175 (146)
    • KT315 (193)
    • KU10T (182)
    • KU25T (182)
    • KU30T (182)
    • KY3000 (114)
    Hand Of Tool
    Hand Of Tool
    • L (67)
    • R (92)
    Wiper Insert
    Wiper Insert
    • N (1910)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(1)
    • 10.3 mm(1)
    • 10.775 mm(1)
    • 10.976 mm(2)
    • 11.0 mm(4)
    • 11.101 mm(2)
    • 12.0 mm(1)
    • 12.576 mm(2)
    • 12.701 mm(6)
    • 13.0 mm(2)
    • 14.0 mm(2)
    • 14.15 mm(2)
    • 14.275 mm(4)
    • 15.875 mm(4)
    • 16.0 mm(4)
    • 16.25 mm(2)
    • 17.0 mm(4)
    • 17.35 mm(2)
    • 17.475 mm(4)
    • 19.05 mm(2)
    • 19.425 mm(1)
    • 20.0 mm(2)
    • 22.0 mm(2)
    • 22.225 mm(3)
    • 22.6 mm(2)
    • 25.0 mm(6)
    • 25.401 mm(11)
    • 27.0 mm(4)
    • 28.576 mm(1)
    • 31.75 mm(23)
    • 32.0 mm(11)
    • 32.525 mm(2)
    • 34.926 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(16)
    • 40.0 mm(4)
    • 41.276 mm(4)
    • 50.801 mm(4)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.406 in(1)
    • 0.424 in(1)
    • 0.432 in(2)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.473 in(1)
    • 0.495 in(2)
    • 0.5 in(6)
    • 0.512 in(2)
    • 0.551 in(2)
    • 0.557 in(2)
    • 0.562 in(4)
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.64 in(2)
    • 0.669 in(4)
    • 0.683 in(2)
    • 0.689 in(4)
    • 0.75 in(2)
    • 0.765 in(1)
    • 0.787 in(2)
    • 0.866 in(2)
    • 0.875 in(3)
    • 0.89 in(2)
    • 0.984 in(6)
    • 1.0 in(11)
    • 1.063 in(4)
    • 1.125 in(1)
    • 1.25 in(23)
    • 1.26 in(11)
    • 1.281 in(2)
    • 1.375 in(4)
    • 1.379 in(1)
    • 1.5 in(16)
    • 1.575 in(4)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension Min받는 사람F Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(151)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.55 mm(4)
    • 20.326 mm(1)
    • 22.0 mm(3)
    • 25.401 mm(4)
    • 26.0 mm(2)
    • 28.576 mm(4)
    • 34.0 mm(4)
    • 34.926 mm(6)
    • 38.1 mm(4)
    • 41.301 mm(57)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.6 mm(56)
    • 50.0 mm(2)
    • 50.801 mm(2)
    • 54.0 mm(4)
    • 55.875 mm(3)
    • 56.625 mm(49)
    • 57.151 mm(6)
    • 57.2 mm(29)
    • 60.325 mm(4)
    • 63.5 mm(22)
    • 69.851 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(8)
    • 82.551 mm(4)
    • 88.9 mm(553)
    • 127.0 mm(1)
    • 139.701 mm(768)
    • 146.05 mm(3)
    • 174.601 mm(127)
    • 209.601 mm(251)
    • 222.3 mm(60)
    • 333.0 mm(4)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(151)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(4)
    • 0.8 in(1)
    • 0.866 in(3)
    • 1.0 in(4)
    • 1.024 in(2)
    • 1.125 in(4)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.5 in(4)
    • 1.627 in(57)
    • 1.732 in(2)
    • 1.75 in(2)
    • 1.874 in(56)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(49)
    • 2.25 in(6)
    • 2.253 in(29)
    • 2.375 in(4)
    • 2.5 in(22)
    • 2.75 in(4)
    • 2.757 in(1)
    • 3.0 in(8)
    • 3.25 in(4)
    • 3.5 in(553)
    • 5.0 in(1)
    • 5.5 in(768)
    • 5.75 in(3)
    • 6.875 in(127)
    • 8.252 in(251)
    • 8.752 in(60)
    • 13.11 in(4)
    Minimum Axial Groove Diameter Min받는 사람Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(1905)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(1905)
    Maximum Axial Groove Diameter Min받는 사람Maximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 20.0 (3)
    • 45.0 (7)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (87)
    • S (72)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (159)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.0 in(10)
    • 1.23 in(1)
    • 1.232 in(1)
    • 1.291 in(1)
    • 1.5 in(1)
    • 1.891 in(2)
    • 2.0 in(25)
    • 2.499 in(1)
    • 2.5 in(2)
    • 2.52 in(2)
    • 3.0 in(4)
    • 3.15 in(2)
    • 3.75 in(2)
    • 3.781 in(1)
    • 3.938 in(4)
    • 4.0 in(6)
    • 4.5 in(2)
    • 5.0 in(3)
    • 5.039 in(2)
    • 6.0 in(6)
    • 6.299 in(4)
    • 7.0 in(3)
    • 7.875 in(1)
    • 8.0 in(8)
    • 9.0 in(1)
    • 10.0 in(7)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.401 mm(10)
    • 31.25 mm(1)
    • 31.3 mm(1)
    • 32.801 mm(1)
    • 38.1 mm(1)
    • 48.0 mm(2)
    • 50.801 mm(25)
    • 63.475 mm(1)
    • 63.5 mm(2)
    • 64.0 mm(2)
    • 76.2 mm(4)
    • 80.0 mm(2)
    • 95.25 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(4)
    • 101.601 mm(6)
    • 114.301 mm(2)
    • 127.0 mm(3)
    • 128.0 mm(2)
    • 152.4 mm(6)
    • 160.0 mm(4)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.201 mm(8)
    • 228.601 mm(1)
    • 254.0 mm(7)
    Maximum Bore Depth Min받는 사람Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (9)
    • S (60)
    frontEnd
    Clamp Style
    Clamp Style
    • N (197)
    Cutting Width
    Cutting Width
    • 0.02 in(76)
    • 0.031 in(133)
    • 0.035 in(69)
    • 0.039 in(178)
    • 0.041 in(85)
    • 0.047 in(246)
    • 0.055 in(85)
    • 0.058 in(75)
    • 0.06 in(171)
    • 0.062 in(335)
    • 0.067 in(84)
    • 0.069 in(160)
    • 0.073 in(103)
    • 0.077 in(81)
    • 0.078 in(106)
    • 0.079 in(199)
    • 0.088 in(189)
    • 0.089 in(123)
    • 0.094 in(50)
    • 0.095 in(289)
    • 0.097 in(89)
    • 0.098 in(175)
    • 0.105 in(93)
    • 0.108 in(170)
    • 0.11 in(85)
    • 0.119 in(237)
    • 0.122 in(81)
    • 0.125 in(446)
    • 0.126 in(189)
    • 0.128 in(162)
    • 0.129 in(68)
    • 0.131 in(43)
    • 0.138 in(195)
    • 0.143 in(89)
    • 0.147 in(43)
    • 0.15 in(32)
    • 0.151 in(37)
    • 0.152 in(74)
    • 0.156 in(130)
    • 0.157 in(148)
    • 0.167 in(124)
    • 0.169 in(78)
    • 0.177 in(123)
    • 0.178 in(80)
    • 0.185 in(100)
    • 0.188 in(160)
    • 0.189 in(234)
    • 0.192 in(45)
    • 0.193 in(44)
    • 0.195 in(83)
    • 0.196 in(84)
    • 0.197 in(52)
    • 0.202 in(36)
    • 0.213 in(39)
    • 0.217 in(39)
    • 0.218 in(8)
    • 0.219 in(36)
    • 0.237 in(45)
    • 0.25 in(142)
    • 0.256 in(42)
    • 0.276 in(3)
    • 0.281 in(11)
    • 0.312 in(12)
    • 0.315 in(2)
    • 0.345 in(3)
    • 0.354 in(3)
    • 0.375 in(12)
    • 0.381 in(5)
    • 0.384 in(9)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(76)
    • 0.775 mm(121)
    • 0.8 mm(80)
    • 0.9 mm(69)
    • 1.0 mm(178)
    • 1.05 mm(85)
    • 1.201 mm(246)
    • 1.401 mm(85)
    • 1.475 mm(75)
    • 1.5 mm(171)
    • 1.576 mm(335)
    • 1.701 mm(84)
    • 1.75 mm(160)
    • 1.826 mm(103)
    • 1.951 mm(81)
    • 1.975 mm(106)
    • 2.0 mm(199)
    • 2.2 mm(158)
    • 2.225 mm(177)
    • 2.25 mm(123)
    • 2.375 mm(50)
    • 2.401 mm(289)
    • 2.475 mm(89)
    • 2.5 mm(175)
    • 2.676 mm(93)
    • 2.75 mm(170)
    • 2.801 mm(85)
    • 3.0 mm(237)
    • 3.1 mm(81)
    • 3.176 mm(446)
    • 3.2 mm(189)
    • 3.25 mm(162)
    • 3.276 mm(68)
    • 3.325 mm(43)
    • 3.5 mm(195)
    • 3.6 mm(89)
    • 3.725 mm(43)
    • 3.801 mm(32)
    • 3.825 mm(37)
    • 3.85 mm(74)
    • 3.95 mm(126)
    • 3.975 mm(44)
    • 4.0 mm(148)
    • 4.25 mm(124)
    • 4.3 mm(78)
    • 4.5 mm(123)
    • 4.525 mm(80)
    • 4.7 mm(100)
    • 4.775 mm(160)
    • 4.801 mm(234)
    • 4.875 mm(45)
    • 4.9 mm(44)
    • 4.95 mm(83)
    • 4.976 mm(84)
    • 5.0 mm(52)
    • 5.125 mm(36)
    • 5.4 mm(39)
    • 5.5 mm(39)
    • 5.525 mm(8)
    • 5.575 mm(36)
    • 6.0 mm(45)
    • 6.351 mm(142)
    • 6.5 mm(42)
    • 7.0 mm(3)
    • 7.125 mm(11)
    • 7.926 mm(12)
    • 8.0 mm(2)
    • 8.75 mm(3)
    • 9.0 mm(3)
    • 9.525 mm(12)
    • 9.675 mm(5)
    • 9.75 mm(9)
    Cutting Width Min받는 사람Cutting Width Max
    Insert Shape
    Insert Shape
    • PRISMATIC (2)
    • TN-TOP NOTCH (1910)
    Insert Size
    Insert Size
    • 1 (5)
    • 2 (41)
    • 3 (43)
    • 4 (16)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(40)
    • 0.21 in(39)
    • 0.25 in(2)
    • 0.293 in(8)
    • 0.294 in(15)
    • 0.3 in(1)
    • 0.334 in(4)
    • 0.416 in(3)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.026 mm(1)
    • 1.6 mm(2)
    • 1.701 mm(1)
    • 1.776 mm(2)
    • 1.901 mm(1)
    • 3.301 mm(1)
    • 3.5 mm(40)
    • 5.325 mm(39)
    • 6.351 mm(2)
    • 7.45 mm(8)
    • 7.476 mm(15)
    • 7.625 mm(1)
    • 8.475 mm(4)
    • 10.55 mm(3)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.65 mm(8)
    • 0.75 mm(123)
    • 1.026 mm(221)
    • 1.1 mm(165)
    • 1.326 mm(11)
    • 1.901 mm(6)
    • 1.975 mm(8)
    • 2.551 mm(7)
    • 2.75 mm(6)
    • 2.776 mm(2)
    • 2.926 mm(130)
    • 3.801 mm(47)
    • 3.85 mm(8)
    Maximum Cutting Insert Depth Min받는 사람Maximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.027 in(8)
    • 0.03 in(123)
    • 0.04 in(221)
    • 0.044 in(165)
    • 0.053 in(11)
    • 0.075 in(6)
    • 0.078 in(8)
    • 0.1 in(7)
    • 0.108 in(6)
    • 0.109 in(2)
    • 0.115 in(130)
    • 0.15 in(47)
    • 0.152 in(8)
    Maximum Cutting Insert Depth Min받는 사람Maximum Cutting Insert Depth Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (2)
    • TN-TOP NOTCH (1712)
    Insert Seat Size
    Insert Seat Size
    • 1 (16)
    • 2 (502)
    • 3 (891)
    • 4 (300)
    • 5 (3)
    • 6 (2)
    Cutting Tool Material
    Cutting Tool Material
    • B H (125)
    • B L (80)
    • C N (114)
    • D P (105)
    • H T (193)
    • H W (1880)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (63)
    • BORING BAR HEAD (6)
    • SQUARE SHANK (90)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.701 mm(5)
    • 15.875 mm(5)
    • 16.0 mm(3)
    • 19.05 mm(4)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.401 mm(8)
    • 31.75 mm(3)
    • 32.0 mm(2)
    • 38.1 mm(4)
    • 40.0 mm(4)
    • 44.45 mm(3)
    • 50.0 mm(1)
    • 50.801 mm(8)
    • 57.151 mm(1)
    • 63.5 mm(7)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(1)
    • 0.394 in(1)
    • 0.473 in(3)
    • 0.5 in(5)
    • 0.625 in(5)
    • 0.63 in(3)
    • 0.75 in(4)
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.0 in(8)
    • 1.25 in(3)
    • 1.26 in(2)
    • 1.5 in(4)
    • 1.575 in(4)
    • 1.75 in(3)
    • 1.969 in(1)
    • 2.0 in(8)
    • 2.25 in(1)
    • 2.5 in(7)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(3)
    • 0.5 in(6)
    • 0.606 in(1)
    • 0.625 in(5)
    • 0.63 in(4)
    • 0.75 in(10)
    • 0.787 in(6)
    • 0.939 in(1)
    • 0.984 in(8)
    • 1.0 in(18)
    • 1.214 in(2)
    • 1.25 in(12)
    • 1.26 in(7)
    • 1.5 in(4)
    • 1.53 in(4)
    • 1.848 in(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.701 mm(6)
    • 15.4 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(4)
    • 19.05 mm(10)
    • 20.0 mm(6)
    • 23.826 mm(1)
    • 25.0 mm(8)
    • 25.401 mm(18)
    • 30.826 mm(2)
    • 31.75 mm(12)
    • 32.0 mm(7)
    • 38.1 mm(4)
    • 38.825 mm(4)
    • 46.95 mm(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.473 in(3)
    • 0.5 in(6)
    • 0.625 in(5)
    • 0.63 in(4)
    • 0.75 in(10)
    • 0.787 in(6)
    • 0.864 in(1)
    • 0.984 in(11)
    • 1.0 in(18)
    • 1.141 in(2)
    • 1.25 in(12)
    • 1.26 in(4)
    • 1.455 in(4)
    • 1.5 in(4)
    • 1.848 in(1)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 9.525 mm(4)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.701 mm(6)
    • 15.875 mm(5)
    • 16.0 mm(4)
    • 19.05 mm(10)
    • 20.0 mm(6)
    • 21.951 mm(1)
    • 25.0 mm(11)
    • 25.401 mm(18)
    • 28.951 mm(2)
    • 31.75 mm(12)
    • 32.0 mm(4)
    • 36.95 mm(4)
    • 38.1 mm(4)
    • 46.95 mm(1)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    Top Notch™ 인서트
    (1695)

    Top Notch™ 인서트

    툴 홀더
    (127)

    툴 홀더

    보링 바
    (63)

    보링 바

    Top Notch™ CBN 인서트
    (19)

    Top Notch™ CBN 인서트

    헤드 및 카트리지
    (8)

    헤드 및 카트리지

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?