철도 부품 선삭

필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (180)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(179)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(179)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(179)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(180)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(180)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(179)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(179)
    • M Stainless Steel (26)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(26)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(26)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(26)
    • K Cast Iron (174)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(169)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(174)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(174)
    • N Non-Ferrous Materials (19)
      • N1
        Wrought Aluminum (18)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(18)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(8)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (18)
      • N6
        Carbon, Graphite Composites, CFRP (18)
      • N7
        MMC's (18)
    • S High-Temp Alloys (25)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(23)
    • H Hardened Materials (14)
      • H1
        Hardened Materials 44-48 HRC(14)
      • H2
        Hardened Materials 48-55 HRC(14)
      • H3
        Hardened Materials 56-60 HRC(11)
    • C CFRP Materials (18)
      • C1
        CFRP, CFRP / CFRP (18)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (18)
    1차 선택 선택
    • IN (3)
    Applications
    Applications
    • CRT ProfilingCRT Profiling (6)
    • FacingFacing (29)
    • ID FacingID Facing (10)
    • Multiple Direction CuttingMultiple Direction Cutting (31)
    • ProfilingProfiling (14)
    • TurningTurning (29)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (37)
    • Lightly Interrupted Cut (63)
    • Smooth Cut (75)
    • Varying Depth of Cut (47)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 75.0 (4)
    • 90.0 (24)
    • 93.0 (4)
    • 95.0 (8)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (2)
    • Toolholder (28)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (68)
    • 2.0 (26)
    • 3.0 (1)
    • 4.0 (56)
    • 6.0 (22)
    • 8.0 (34)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.681 in(8)
    • 1.772 in(2)
    • 2.757 in(2)
    • 5.906 in(6)
    • 6.694 in(6)
    • 7.0 in(2)
    • 7.875 in(2)
    • 8.0 in(2)
    • 9.843 in(9)
    • 16.25 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 42.7 mm(8)
    • 45.0 mm(2)
    • 70.0 mm(2)
    • 150.0 mm(6)
    • 170.0 mm(6)
    • 177.8 mm(2)
    • 200.0 mm(2)
    • 203.201 mm(2)
    • 250.0 mm(9)
    • 412.75 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.031 in(23)
    • 0.047 in(31)
    • 0.063 in(27)
    • 0.095 in(30)
    • 0.125 in(1)
    • 0.126 in(5)
    • 0.156 in(1)
    • 0.157 in(28)
    • 0.188 in(6)
    • 0.197 in(12)
    • 0.237 in(11)
    • 0.311 in(2)
    • 0.313 in(3)
    • 0.315 in(8)
    • 0.375 in(2)
    • 0.394 in(11)
    • 0.492 in(18)
    • 0.5 in(2)
    • 0.63 in(11)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.8 mm(23)
    • 1.201 mm(31)
    • 1.6 mm(27)
    • 2.401 mm(30)
    • 3.176 mm(1)
    • 3.2 mm(5)
    • 3.975 mm(1)
    • 4.0 mm(28)
    • 4.775 mm(6)
    • 5.0 mm(12)
    • 6.0 mm(11)
    • 7.9 mm(2)
    • 7.95 mm(3)
    • 8.0 mm(8)
    • 9.525 mm(2)
    • 10.0 mm(11)
    • 12.5 mm(18)
    • 12.701 mm(2)
    • 16.0 mm(11)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(157)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(157)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (16)
    • AC5 (6)
    • CG4 (4)
    • CL4 (16)
    • CM2 (2)
    • CM3 (23)
    • CM5 (12)
    • CPX (17)
    • GX (14)
    • K090 (10)
    • K1 (10)
    • K10M (10)
    • K10P (8)
    • K20K (10)
    • K21 (10)
    • K25P (10)
    • K313 (18)
    • K35P (2)
    • K40 (11)
    • K420 (16)
    • K68 (19)
    • KC210 (10)
    • KC250 (10)
    • KC5010 (21)
    • KC5025 (17)
    • KC5115RR (2)
    • KC5125RR (2)
    • KC5410 (14)
    • KC5510 (10)
    • KC720 (2)
    • KC730 (18)
    • KC7310 (10)
    • KC732 (4)
    • KC8050 (25)
    • KC810 (11)
    • KC850 (22)
    • KC9010 (12)
    • KC9025 (12)
    • KC910 (14)
    • KC9105 (8)
    • KC9110 (37)
    • KC9110RR (1)
    • KC9115RR (2)
    • KC9120 (10)
    • KC9125 (38)
    • KC9125RR (2)
    • KC9140 (12)
    • KC9145 (10)
    • KC9215 (10)
    • KC9225 (10)
    • KC9240 (22)
    • KC9240NEW (22)
    • KC9245 (10)
    • KC9315 (31)
    • KC9320 (13)
    • KC9325 (10)
    • KC935 (10)
    • KC950 (11)
    • KC990 (10)
    • KCD25 (1)
    • KCK05 (10)
    • KCK05B (10)
    • KCK15 (16)
    • KCK15B (22)
    • KCK20 (23)
    • KCK20B (18)
    • KCM15 (10)
    • KCM15B (8)
    • KCM25 (20)
    • KCM25B (15)
    • KCM35 (10)
    • KCM35B (10)
    • KCP10 (62)
    • KCP10B (48)
    • KCP25 (83)
    • KCP25B (56)
    • KCP25C (42)
    • KCP30 (27)
    • KCP30B (19)
    • KCP40 (12)
    • KCP40B (12)
    • KCPK05 (25)
    • KCS10 (12)
    • KCS10B (17)
    • KCU10 (21)
    • KCU10B (18)
    • KCU25 (21)
    • KCU25B (14)
    • KM1 (6)
    • KU30T (10)
    • KY1320 (8)
    • KY1540 (8)
    • KY1615 (20)
    • KY2000 (8)
    • KY3000 (10)
    • KY3400 (10)
    • KY3500 (10)
    • KY4300 (8)
    • KY4400 (8)
    • KYHK15B (8)
    • KYK25 (8)
    • KYK35 (10)
    • KYS25 (8)
    • KYS30 (8)
    • MC2 (7)
    • NL250 (10)
    • NL300 (13)
    • NL400 (8)
    • NL920 (4)
    • SP0819 (10)
    • SP3019 (10)
    • SP4019 (8)
    • SPADAP (10)
    • TN7035 (3)
    Hand Of Tool
    Hand Of Tool
    • L (10)
    • N (9)
    • R (11)
    Wiper Insert
    Wiper Insert
    • N (177)
    • Y (10)
    F Dimension
    F Dimension
    • 10.0 mm(1)
    • 12.5 mm(1)
    • 16.5 mm(1)
    • 17.5 mm(1)
    • 18.5 mm(1)
    • 20.5 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(4)
    • 32.5 mm(1)
    • 35.0 mm(4)
    • 40.0 mm(2)
    • 50.0 mm(6)
    • 50.801 mm(2)
    • 57.151 mm(1)
    • 63.5 mm(2)
    F Dimension Min받는 사람F Dimension Max
    F Dimension
    F Dimension
    • 0.394 in(1)
    • 0.492 in(1)
    • 0.65 in(1)
    • 0.69 in(1)
    • 0.728 in(1)
    • 0.807 in(1)
    • 1.024 in(1)
    • 1.181 in(1)
    • 1.26 in(4)
    • 1.28 in(1)
    • 1.379 in(4)
    • 1.575 in(2)
    • 1.969 in(6)
    • 2.0 in(2)
    • 2.25 in(1)
    • 2.5 in(2)
    F Dimension Min받는 사람F Dimension Max
    Cutting Direction
    Cutting Direction
    • B (24)
    • S (6)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (13)
    • NEUTRAL (ZERO) (15)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • KM MODULAR ADAPTER (6)
    Clamp Style
    Clamp Style
    • M (6)
    • P (9)
    • X (25)
    Front End Type
    Front End Type
    • KMT - KM Adapter (6)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (26)
    • L-RECTANGLE 90 (17)
    • L-RECTANGLE ON EDGE 90 (17)
    • O-OCTOGON 135 (1)
    • R-ROUND (64)
    • S-SQUARE 90 (39)
    • T-TRIANGLE 60 (23)
    Cartridge Size
    Cartridge Size
    • 32 (10)
    Front End Style
    Front End Style
    • KMT00 All KM, except 02,05,09 (6)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.63 in(1)
    • 0.946 in(2)
    • 1.26 in(1)
    • 1.299 in(1)
    • 1.581 in(2)
    • 3.071 in(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 16.0 mm(1)
    • 24.0 mm(2)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 40.151 mm(2)
    • 78.0 mm(1)
    Maximum Cutting Depth Min받는 사람Maximum Cutting Depth Max
    Gage Length
    Gage Length
    • 0.787 in(1)
    • 0.984 in(1)
    • 1.181 in(1)
    • 1.575 in(1)
    • 1.969 in(1)
    • 2.205 in(1)
    Gage Length
    Gage Length
    • 20 mm(1)
    • 25 mm(1)
    • 30 mm(1)
    • 40 mm(1)
    • 50 mm(1)
    • 56 mm(1)
    Front End Size
    Front End Size
    • 1.26 in(1)
    • 1.575 in(1)
    • 1.969 in(1)
    • 2.48 in(1)
    • 3.15 in(1)
    • 3.938 in(1)
    Front End Size Min받는 사람Front End Size Max
    Front End Size
    Front End Size
    • 32.0 mm(1)
    • 40.0 mm(1)
    • 50.0 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(1)
    • 100.0 mm(1)
    Front End Size Min받는 사람Front End Size Max
    insertGeometry
    Shape
    Shape
    • C-DIAMOND/RHOMBIC 80 (18)
    • L-RECTANGLE 90 (8)
    • L-RECTANGLE ON EDGE 90 (17)
    • O-OCTOGON 135 (1)
    • R-ROUND (47)
    • S-SQUARE 90 (35)
    • T-TRIANGLE 60 (23)
    Insert IC Size
    Insert IC Size
    • 9.525 mm(11)
    • 12.0 mm(4)
    • 12.701 mm(19)
    • 15.826 mm(2)
    • 15.875 mm(14)
    • 16.0 mm(5)
    • 19.05 mm(21)
    • 20.0 mm(7)
    • 25.0 mm(14)
    • 25.401 mm(16)
    • 32.0 mm(11)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.375 in(11)
    • 0.473 in(4)
    • 0.5 in(19)
    • 0.623 in(2)
    • 0.625 in(14)
    • 0.63 in(5)
    • 0.75 in(21)
    • 0.787 in(7)
    • 0.984 in(14)
    • 1.0 in(16)
    • 1.26 in(11)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.575 mm(1)
    • 9.525 mm(1)
    • 12.701 mm(7)
    • 12.9 mm(4)
    • 13.65 mm(2)
    • 13.726 mm(2)
    • 15.875 mm(5)
    • 16.125 mm(3)
    • 16.5 mm(10)
    • 19.0 mm(9)
    • 19.05 mm(13)
    • 19.35 mm(7)
    • 22.0 mm(8)
    • 22.901 mm(2)
    • 25.401 mm(10)
    • 25.8 mm(4)
    • 27.5 mm(5)
    • 30.0 mm(4)
    • 31.75 mm(5)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.259 in(1)
    • 0.375 in(1)
    • 0.5 in(7)
    • 0.508 in(4)
    • 0.537 in(2)
    • 0.54 in(2)
    • 0.625 in(5)
    • 0.635 in(3)
    • 0.65 in(10)
    • 0.748 in(9)
    • 0.75 in(13)
    • 0.762 in(7)
    • 0.866 in(8)
    • 0.902 in(2)
    • 1.0 in(10)
    • 1.016 in(4)
    • 1.083 in(5)
    • 1.181 in(4)
    • 1.25 in(5)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 52 (2)
    • 75 (1)
    • 76 (4)
    • 80 (2)
    • RH (12)
    • RM (35)
    • RN (16)
    • RP (14)
    • RRF (4)
    • RRH (5)
    • RRP (8)
    • RRSM (3)
    • RU (2)
    • S-WT5 (3)
    • UP (7)
    • UPG (24)
    Cutting Tool Material
    Cutting Tool Material
    • C A (22)
    • C N (10)
    • H T (12)
    • H W (187)
    Tolerance Class
    Tolerance Class
    • G (1)
    • M (118)
    • U (20)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (28)
    • TAPER SHANK (2)
    System Size
    System Size
    • KM80TS (2)
    Back-End Diameter
    Back-End Diameter
    • 32.0 mm(1)
    • 40.0 mm(1)
    • 50.0 mm(1)
    • 63.0 mm(1)
    • 80.0 mm(3)
    • 100.0 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.26 in(1)
    • 1.575 in(1)
    • 1.969 in(1)
    • 2.48 in(1)
    • 3.15 in(3)
    • 3.938 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.984 in(6)
    • 1.26 in(6)
    • 1.5 in(2)
    • 1.575 in(11)
    • 2.0 in(2)
    • 3.0 in(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Height
    Shank Height
    • 25.0 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(2)
    • 40.0 mm(11)
    • 50.801 mm(2)
    • 76.2 mm(1)
    Shank Height Min받는 사람Shank Height Max
    Shank Width
    Shank Width
    • 0.984 in(9)
    • 1.26 in(3)
    • 1.5 in(2)
    • 1.575 in(11)
    • 2.0 in(2)
    • 2.25 in(1)
    Shank Width Min받는 사람Shank Width Max
    Shank Width
    Shank Width
    • 25.0 mm(9)
    • 32.0 mm(3)
    • 38.1 mm(2)
    • 40.0 mm(11)
    • 50.801 mm(2)
    • 57.151 mm(1)
    Shank Width Min받는 사람Shank Width Max
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO 카탈로그 번호등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?