5720 Series • End Mill • Screw-On • Inch
Shoulder milling cutter for high-speed aluminum machining.
제품 번호5672512
ISO 카탈로그 IDA5720VZ16SA1.00Z2R2ANSI 카탈로그 IDA5720VZ16SA1.00Z2R2
- K Cast Iron
- N Non-Ferrous
Spiral Circular
페이스 밀링
헬리컬 밀링
램핑: 블랭크
섕크 — 스크류 온
밀링 — 내부 쿨런트
포켓팅
카운터 보링
Inclined Square End Mill
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
제품 번호 | 5672512 |
ISO 카탈로그 ID | A5720VZ16SA1.00Z2R2 |
ANSI 카탈로그 ID | A5720VZ16SA1.00Z2R2 |
[D1] Effective Cutting Diameter | 25.4 mm |
[D1] Effective Cutting Diameter | 1 in |
[D] Adapter / Shank / Bore Diameter | 21 mm |
[D] Adapter / Shank / Bore Diameter | .8268 in |
[DPM] Pilot Diameter Machine Side | 12.5 mm |
[DPM] Pilot Diameter Machine Side | .4921 in |
[G3X] Connection Thread Size External | M12 |
[L2] Head Length | 50 mm |
[L2] Head Length | 1.968 in |
[WF] Width of Flat | 18 mm |
[WF] Width of Flat | .7087 in |
[AP1MAX] 1st Maximum Cutting Depth | 16 mm |
[AP1MAX] 1st Maximum Cutting Depth | .63 in |
Number of Inserts | 2 |
[Z] Number of Flutes | 2 |
Maximum Ramping Angle | 14.7 |
Weight Pounds | 0.23 |
Max RPM | 50000 |
공작물 재료
- Cast Iron
- Non-Ferrous
사용 및 응용 분야
Spiral Circular
페이스 밀링
헬리컬 밀링
램핑: 블랭크
섕크 — 스크류 온
밀링 — 내부 쿨런트
포켓팅
카운터 보링
Inclined Square End Mill
특징 및 장점
- For pocketing and profiling in aluminum and aluminum alloys.
- Maximum stability in high-speed applications.
- Excellent choice for components with thin walls due to low cutting pressure.
- Internal coolant supply.
- Reinforced pockets for high feed applications and ramping, increasing tool and productivity.
이송 및 속도를 계산하려면 솔루션을 생성하세요.
솔루션 생성 후 이송 및 속도 아이콘을 선택하면 추천 값이 제공됩니다. 기계와 사양을 추가하여 사용자 정보를 지정하거나 슬라이더를 사용하여 조정할 수 있습니다.
인서트 선택
인서트 선택 가이드
5720 Series • Insert Selection Guide | ||||||
Material Group | Light | General | Heavy | |||
– | (Light geometry) | – | (Strong geometry) | |||
– | wear | toughness | ||||
– | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | – | – | – | – | – | – |
K3 | – | – | – | – | – | – |
N1–N2 | .F..721 | GH1 | .F..721 | GH1 | .F..721 | GH1 |
N3 | .F..721 | GH1 | .F..721 | GH1 | .F..721 | GH1 |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
이송량
권장 초기 이송[mm]
5720 Series • Recommended Starting Feeds [mm/th] | |||||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | |||||||||||
L | M | H | L | M | H | L | M | H | L | M | H | L | M | H | |
...FR721 | 0,12 | 0.45 | 0.81 | 0,08 | 0.33 | 0.58 | 0,06 | 0.25 | 0.43 | 0,06 | 0.21 | 0.38 | 0,05 | 0.2 | 0.35 |
...ER721 | 0.15 | 0.50 | 0.92 | 0.11 | 0.36 | 0.66 | 0.08 | 0.27 | 0.5 | 0.07 | 0,24 | 0.43 | 0.07 | 0,22 | 0,40 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
5720 Series • Recommended Starting Feeds [IPT] | |||||||||||||||
Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | |||||||||||
L | M | H | L | M | H | L | M | H | L | M | H | L | M | H | |
...FR721 | 0,12 | 0.45 | 0.81 | 0,08 | 0.33 | 0.58 | 0,06 | 0.25 | 0.43 | 0,06 | 0.21 | 0.38 | 0,05 | 0.2 | 0.35 |
...ER721 | 0.15 | 0.50 | 0.92 | 0.11 | 0.36 | 0.66 | 0.08 | 0.27 | 0.5 | 0.07 | 0,24 | 0.43 | 0.07 | 0,22 | 0,40 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
속도
권장 초기 속도[m/min]
5720 Series • Recommended Starting Speed [m/min] | ||||
Grade | GH1 | |||
Chip Thickness hex mm | Min | Max | ||
Material Group | Max | Start | Min | |
P | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
5 | – | – | – | |
6 | – | – | – | |
M | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
K | 1 | 215 | 140 | 120 |
2 | 195 | 120 | 100 | |
3 | 180 | 105 | 80 | |
N | 1 | 795 | 695 | 600 |
2 | 615 | 520 | 425 | |
3 | 615 | 520 | 425 | |
S | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
H | 1 | – | – | – |
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
5720 Series • Recommended Starting Speed [SFM] | ||||
Grade | GH1 | |||
Chip Thickness hex Inch | Min | Max | ||
Material Group | Max | Start | Min | |
P | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
5 | – | – | – | |
6 | – | – | – | |
M | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
K | 1 | 705 | 460 | 395 |
2 | 640 | 395 | 330 | |
3 | 590 | 345 | 260 | |
N | 1 | 2610 | 2280 | 1970 |
2 | 2020 | 1705 | 1395 | |
3 | 2020 | 1705 | 1395 | |
S | 1 | – | – | – |
2 | – | – | – | |
3 | – | – | – | |
4 | – | – | – | |
H | 1 | – | – | – |
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
I have read and accepted the Terms & Conditions of use