Name: 7792VXE16 Series • End Mill • Cylindrical Shank • Inch
SKU: 5659564
Rating: 0 (0 reviews)

인서트 선택

인서트 선택 가이드 • IC 12

7792 Series • IC16 • Insert Selection Guide
소재 그룹	경절삭		범용		중황삭
–	(경절삭용 형상)		–		(중절삭용 형상)
–	내마모성				인성
–	형상	재종	형상	재종	형상	재종
P1-P2	...M41	KCPM40	...M41	KCPM40	...D41	KCPM40
P3-P4	...M41	KCPM40	…D	KCPM40	…D41	KCPM40
P5-P6	...M41	KCPM40	...D41	KCPM40	...D41	KCPM40
M1-M2	...M41	KCSM40	...D41	KCSM40	...D41	KCSM40
M3	...M41	KCSM40	...D41	KCSM40	...D41	KCSM40
K1-K2	…D	KCK15	…D	KCK15	…D	KCPK30
K3	…D	KCPK30	…D	KCPK30	…D	KCPK30
N1-N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1-S2	...M41	KCSM40	...D41	KCSM40	...D41	KCSM40
S3	KCSM40	SP6519	...D41	KCSM40	...D41	KCSM40
S4	KCSM40	SP6519	...D41	KCSM40	...D41	KCSM40
H1	…D	KC522M	…D	KC522M	…D	KC522M

자세히 읽기View Less

이송량

7792 Series • IC16 • Recommended Starting Feeds [mm/th]
인서트 형상	반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz)
	DOC	30%			40–100%
	(mm)	L	M	H	L	M	H
.S..D	3,5	0,21	0,52	0,83	0,19	0,47	0,76
.S..D	2,5	0,24	0,61	0,97	0,22	0,55	0,89
.S..D	2	0,27	0,67	1,08	0,25	0,62	0,99
.E..D41	3,5	0,14	0,46	0,76	0,13	0,42	0,70
.E..D41	2,5	0,17	0,54	0,89	0,15	0,49	0,82
.E..D41	2	0,19	0,60	0,99	0,17	0,55	0,91
.E..M41	2,7	0,14	0,46	0,76	0,13	0,42	0,70
.E..M41	2	0,19	0,60	0,99	0,17	0,55	0,91
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

7792 Series • IC16 • Recommended Starting Feeds for Plunging [mm/th]
인서트 형상	프로그래밍된 날당 이송(fz)
	L	M	H
.S..D	0,10	0,25	0,41
.E..D41	0,07	0,23	0,38
.E..M41	0,07	0,23	0,38
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

7792 Series • IC16 • Recommended Starting Feeds [IPT]
인서트 형상	반경 방향 절삭폭(ae) 비율에 따른 권장 초기 날당 이송(Fz)
	DOC	30%			40–100%
	(Inch)	L	M	H	L	M	H
.S..D	0.14	0.008	0.020	0.032	0.007	0.019	0.030
.S..D	0.1	0.009	0.024	0.038	0.009	0.022	0.035
.S..D	0.08	0.011	0.026	0.042	0.010	0.024	0.039
.E..D41	0.14	0.006	0.018	0.030	0.005	0.017	0.028
.E..D41	0.1	0.007	0.021	0.036	0.006	0.019	0.032
.E..D41	0.08	0.007	0.024	0.039	0.007	0.022	0.036
.E..M41	0.107	0.006	0.018	0.030	0.005	0.017	0.028
.E..M41	0.08	0.007	0.024	0.039	0.007	0.022	0.036
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

7792 Series • IC16 • Recommended Starting Feeds for Plunging [IPT]
인서트 형상	프로그래밍된 날당 이송(fz)
	L	M	H
.S..D	0.004	0.010	0.016
.E..D41	0.003	0.009	0.015
.E..M41	0.003	0.009	0.015
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

자세히 읽기View Less

속도

권장 초기 속도[m/min]

7792 Series IC16 • Recommended Starting Speed [m/min]
재종		KC522M			KCPK30			KCPM40			KCSM40			SC6525			SP6519			X400			X500
칩 두께 hex mm		최소		최대	최소		최대	최소		최대	최소		최대	최소		최대	최소		최대	최소		최대	최소		최대
소재 그룹		최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소
P	1	330	285	270	455	395	370	295	260	245	350	320	300	371	254	142	295	215	130	260	190	120	270	200	130
	2	275	240	200	280	255	230	250	215	180	300	270	220	325	225	121	260	190	115	230	170	105	240	280	115
	3	255	215	175	255	230	205	230	195	160	280	240	195	292	200	104	230	165	100	200	150	95	210	155	100
	4	225	185	150	225	185	160	205	170	135	240	205	165	208	145	79	175	125	75	150	110	70	160	120	75
	5	185	170	150	190	170	150	170	155	135	200	180	160	158	120	79	140	105	70	–	–	–	130	100	70
	6	165	125	100	160	135	110	150	115	90	180	140	100	142	100	58	120	85	50	–	–	–	110	80	50
M	1	205	180	165	205	185	155	195	170	155	260	210	185	192	154	121	270	195	115	–	–	–	250	185	115
	2	185	160	130	185	160	140	175	150	125	235	180	145	258	183	108	235	170	105	–	–	–	220	160	100
	3	140	120	95	145	130	115	130	115	90	175	145	110	208	150	92	195	140	85	–	–	–	180	130	80
K	1	230	205	185	295	265	240	–	–	–	–	–	–	392	271	146	–	–	–	–	–	–	–	–	–
	2	180	160	150	235	210	190	–	–	–	–	–	–	304	208	117	–	–	–	–	–	–	–	–	–
	3	150	135	120	195	175	160	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	40	35	25	–	–	–	40	35	30	50	40	25	–	–	–	55	40	20	–	–	–	45	35	25
	2	40	35	25	–	–	–	40	35	30	55	40	25	–	–	–	45	35	20	–	–	–	45	30	20
	3	50	40	25	–	–	–	50	40	30	65	45	30	–	–	–	55	40	25	–	–	–	50	40	25
	4	50	45	35	50	45	35	55	50	35	75	60	40	–	–	–	80	55	35	–	–	–	60	50	35
H	1	120	90	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	95	70	45	–	–	–
H	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	80	60	35	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

7792 Series IC16 • Recommended Starting Speed [SFM]
재종		KC522M			KCPK30			KCPM40			KCSM40			SC6525			SP6519			X400			X500
Chip Thickness hex Inch		최소		최대	최소		최대	최소		최대	최소		최대	최소		최대	최소		최대	최소		최대	최소		최대
소재 그룹		최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소	최대	초기값	최소
P	1	1085	935	885	1495	1295	1215	970	855	805	1150	1050	985	1217	833	458	970	705	425	855	625	395	885	655	425
	2	900	785	655	920	835	755	820	705	590	985	885	720	1067	742	396	855	625	375	755	560	345	785	920	375
	3	835	705	575	835	755	675	755	640	525	920	785	640	950	654	346	755	540	330	655	490	310	690	510	330
	4	740	605	490	740	605	525	675	560	445	785	675	540	692	475	258	575	410	245	490	360	230	525	395	245
	5	605	560	490	625	560	490	560	510	445	655	590	525	525	396	258	460	345	230	–	–	–	425	330	230
	6	540	410	330	525	445	360	490	375	295	590	460	330	458	329	196	395	280	165	–	–	–	360	260	165
M	1	675	590	540	675	605	510	640	560	510	855	690	605	625	508	396	885	640	375	–	–	–	820	605	375
	2	605	525	425	605	525	460	575	490	410	770	590	475	854	604	358	770	560	345	–	–	–	720	525	330
	3	460	395	310	475	425	375	425	375	295	575	475	360	692	492	296	640	460	280	–	–	–	590	425	260
K	1	755	675	605	970	870	785	–	–	–	–	–	–	1279	883	475	–	–	–	–	–	–	–	–	–
	2	590	525	490	770	690	625	–	–	–	–	–	–	1000	692	375	–	–	–	–	–	–	–	–	–
	3	490	445	395	640	575	525	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	130	115	80	–	–	–	130	115	100	165	130	80	–	–	–	180	130	65	–	–	–	150	115	80
	2	130	115	80	–	–	–	130	115	100	180	130	80	–	–	–	150	115	65	–	–	–	150	100	65
	3	165	130	80	–	–	–	165	130	100	215	150	100	–	–	–	180	130	80	–	–	–	165	130	80
	4	165	150	115	165	150	115	180	165	115	245	195	130	–	–	–	260	180	115	–	–	–	195	165	115
H	1	395	295	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	310	230	150	–	–	–
H	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	260	195	115	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

자세히 읽기View Less

애플리케이션 데이터

7792 Series IC16 • Ramping Application Data • Curved Edges • Metric
D1 max	램핑 각도 (°)	a_e 최대 플런징	페이싱 피치	DH min [mm] - (min hole diameter)	DH min (최소 홀 직경)
40	2.55°	13	16,3	50	78
50	1.36°	13	26,1	70	98
52	1.24°	13	28	74	102
63	0.86°	13	39	96	124
66	0.8°	13	41,9	102	130
80	0.58°	13	55,9	130	158
100	0.42°	13	75,9	170	198
125	0.32°	13	100,9	220	248
160	0.23°	13	135,8	290	318
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Metric
D1 max	램핑 각도 (°)	a_e 최대 플런징	페이싱 피치	DH min [mm] - (min hole diameter)	DH min (최소 홀 직경)
40	3.7°	12,3	17,85	50	78
50	2.25°	12,3	27,72	70	98
52	1.65°	12,3	29,82	74	102
63	1.4°	12,3	40,8	96	124
66	1.3°	12,3	43,7	102	130
80	0.8°	12,3	57,7	130	158
100	0.65°	12,3	77,53	170	198
125	0.5°	12,3	102,5	220	248
160	0.27°	12,3	137,46	290	318
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Programing Data • Curved Edges • Metric [mm]
IC	코너R	R	L
06	0,8	1,37	0,4
09	0,8	2,01	0,73
	1,2	2,27	0,67
12	0,8	2,5	1,02
	1,2	2,73	0,97
16	1,2	4,18	1,46
7792 Series IC16 • Programing Data • Straight-Edged Inserts • Metric [mm]
IC	코너R	R	L
06	0,8	1,46	0,529
09	0,8	2,13	1,025
	1,2	2,25	0,95
12	0,8	2,46	1,33
	1,2	2,79	1,27
	2	3,42	1,13
16	1,2	3,56	1,82
CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0,8mm.

7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Inch
D1 max	램핑 각도 (°)	a_e 최대 플런징	페이싱 피치	DH min [Inch] - (min hole diameter)	DH min (최소 홀 직경)
1.5	4.53°	0.484	0.628	1.818	2.921
2.0	2.44°	0.484	1.122	2.818	3.921
2.5	1.51°	0.484	1.626	3.818	4.921
3.0	0.96°	0.484	2.122	4.818	5.921
4.0	0.62°	0.484	3.114	6.818	7.921
5.0	0.52°	0.484	4.114	8.818	9.921
6.0	0.32°	0.484	5.115	10.818	11.921
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Ramping Application Data • Curved Edges • Inch
D1 max	램핑 각도 (°)	a_e 최대 플런징	페이싱 피치	DH min [Inch] - (min hole diameter)	DH min (최소 홀 직경)
1.5	3°	0.512	0.55	1.818	2.921
2.0	2.85°	0.512	1.05	2.818	3.921
2.5	1°	0.512	1.56	3.818	4.921
3.0	0.58°	0.512	1.96	4.818	5.921
4.0	0.51°	0.512	2.96	6.818	7.921
5.0	0.37°	0.512	3.96	8.818	9.921
6.0	0.27°	0.512	4.96	10.818	11.921
NOTE: Maximum ramp angle decreases as nose radius increases.

7792 Series IC16 • Programing Data • Curved Edges • Inch [inch]
IC	코너R	R	L
06	0.031	0.057	0.016
09	0.031	0.079	0.028
	0.047	0.089	0.026
12	0.031	0.098	0.040
	0.047	0.107	0.038
16	0.047	0.164	0.057
7792 Series IC16 • Programing Data • Straight-Edged Inserts • Inch [inch]
IC	코너R	R	L
06	0.031	0.057	0.021
09	0.031	0.084	0.040
	0.047	0.088	0.037
12	0.031	0.097	0.052
	0.047	0.109	0.050
	0.079	0.134	0.044
16	0.047	0.140	0.072
CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0.031".

자세히 읽기View Less

You are about to leave the Solution building process.

Are you sure you want to leave?

제품 번호	5659564
ISO 카탈로그 ID	C7792VXE16CA1.50Z2R4
ANSI 카탈로그 ID	C7792VXE16CA1.50Z2R4
[D1MAX] Maximum Cutting Diameter	37.9 mm
[D1MAX] Maximum Cutting Diameter	1.492 in
[D] Adapter / Shank / Bore Diameter	38.1 mm
[D] Adapter / Shank / Bore Diameter	1.5 in
[L] Overall Length	170.25 mm
[L] Overall Length	6.702 in
[L2] Head Length	102 mm
[L2] Head Length	4.015 in
[AP1MAX] 1st Maximum Cutting Depth	3.5 mm
[AP1MAX] 1st Maximum Cutting Depth	.138 in
[Z] Number of Flutes	2

환영합니다

기본 설정을 확인해 주십시오

기본 설정 업데이트

제품 제안

Product Family suggestions

솔루션 수정

솔루션 추가

유사한 제품:

7792VXE16 Series • End Mill • Cylindrical Shank • Inch

High-Feed copy milling cutter for multiple materials.

제품 번호5659564

ISO 카탈로그 IDC7792VXE16CA1.50Z2R4ANSI 카탈로그 IDC7792VXE16CA1.50Z2R4

공작물 재료

사용 및 응용 분야

특징 및 장점

인서트 선택

인서트 선택 가이드 • IC 12

이송량

속도

권장 초기 속도[m/min]

애플리케이션 데이터

제품 제안

Product Family suggestions

알림

유사한 제품:

7792VXE16 Series • End Mill • Cylindrical Shank • Inch

High-Feed copy milling cutter for multiple materials.

제품 번호5659564

ISO 카탈로그 IDC7792VXE16CA1.50Z2R4ANSI 카탈로그 IDC7792VXE16CA1.50Z2R4

Sending to {{cadTool}} in progress...

공작물 재료

사용 및 응용 분야

특징 및 장점

인서트 선택

인서트 선택 가이드 • IC 12

이송량

속도

권장 초기 속도[m/min]

애플리케이션 데이터

The following files are available