Name: KDM • Weldon® Shank End Mills • RD.X12... • Inch
SKU: 2251757
Rating: 0 (0 reviews)

인서트 선택

인서트 선택 가이드

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.F..LP	KC725M	.S..HP	KC725M	.S..HP	KC725M
P3–P4	.S..HP	KC522M	.S..HP	KCPK30	.S..HP	KCPK30
P5–P6	.S..HP	KC522M	.S..HP	KCPM20	.S..HN	KCPM20
M1–M2	–	–	.S..HP	KC725M	–	–
M3	–	–	.S..HP	KC725M	–	–
K1–K2	.S..HN	KC510M	.S..HP	KCPK30	.S..HP	KCPK30
K3	.S..HN	KC510M	.S..HP	KCPK30	.S..HP	KCPK30
N1–N2	.F..LP	K110M	.F..LP	KC510M	.F..LP	KC510M
N3	.F..LP	KC510M	.F..LP	KC510M	.F..GN	KC510M
S1–S2	–	–	.S..HP	KC725M	–	–
S3	–	–	.S..HP	KC725M	–	–
S4	–	–	.S..HP	KC725M	–	–
H1	.S..HN	KC510M	.S..HN	KC510M	.S..HN	KCPM20

자세히 읽기View Less

이송량

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,08	0,17	0,33	0,06	0,13	0,25	0,06	0,11	0,22	0,05	0,10	0,20	0,05	0,10	0,20	.F..LP
.F..GN	0,08	0,17	0,33	0,06	0,13	0,25	0,06	0,11	0,22	0,05	0,10	0,20	0,05	0,10	0,20	.F..GN
.T..GN	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.T..GN
.S..GN	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.S..GN
.S..HP	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.S..HP
.S..HN	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,26	0,41	0,10	0,25	0,41	.S..HN

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,18	0,35	0,69	0,13	0,26	0,52	0,11	0,23	0,45	0,11	0,21	0,42	0,10	0,21	0,41	.F..LP
.F..GN	0,18	0,35	0,69	0,13	0,26	0,52	0,11	0,23	0,45	0,11	0,21	0,42	0,10	0,21	0,41	.F..GN
.T..GN	0,35	0,88	1,42	0,26	0,66	1,05	0,23	0,57	0,92	0,21	0,54	0,86	0,21	0,52	0,84	.T..GN
.S..GN	0,35	0,88	1,42	0,26	0,66	1,05	0,23	0,57	0,92	0,21	0,54	0,86	0,21	0,52	0,84	.S..GN
.S..HP	0,35	0,88	1,42	0,26	0,66	1,05	0,23	0,57	0,92	0,21	0,54	0,86	0,21	0,52	0,84	.S..HP
.S..HN	0,35	0,88	1,42	0,26	0,66	1,05	0,23	0,57	0,92	0,21	0,54	0,86	0,21	0,52	0,84	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,10	0,19	0,39	0,07	0,14	0,29	0,06	0,13	0,25	0,06	0,12	0,24	0,06	0,12	0,23	.F..LP
.F..GN	0,10	0,19	0,39	0,07	0,14	0,29	0,06	0,13	0,25	0,06	0,12	0,24	0,06	0,12	0,23	.F..GN
.T..GN	0,20	0,49	0,79	0,15	0,37	0,59	0,13	0,32	0,51	0,12	0,30	0,48	0,12	0,29	0,47	.T..GN
.S..GN	0,20	0,49	0,79	0,15	0,37	0,59	0,13	0,32	0,51	0,12	0,30	0,48	0,12	0,29	0,47	.S..GN
.S..HP	0,20	0,49	0,79	0,15	0,37	0,59	0,13	0,32	0,51	0,12	0,30	0,48	0,12	0,29	0,47	.S..HP
.S..HN	0,20	0,49	0,79	0,15	0,37	0,59	0,13	0,32	0,51	0,12	0,30	0,48	0,12	0,29	0,47	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	0,13	0,25	0,51	0,10	0,19	0,38	0,08	0,17	0,33	0,08	0,15	0,31	0,08	0,15	0,30	.F..LP
.F..GN	0,13	0,25	0,51	0,10	0,19	0,38	0,08	0,17	0,33	0,08	0,15	0,31	0,08	0,15	0,30	.F..GN
.T..GN	0,26	0,64	1,04	0,19	0,48	0,77	0,17	0,42	0,67	0,16	0,39	0,63	0,15	0,38	0,61	.T..GN
.S..GN	0,26	0,64	1,04	0,19	0,48	0,77	0,17	0,42	0,67	0,16	0,39	0,63	0,15	0,38	0,61	.S..GN
.S..HP	0,26	0,64	1,04	0,19	0,48	0,77	0,17	0,42	0,67	0,16	0,39	0,63	0,15	0,38	0,61	.S..HP
.S..HN	0,26	0,64	1,04	0,19	0,48	0,77	0,17	0,42	0,67	0,16	0,39	0,63	0,15	0,38	0,61	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.003	.007	.014	.003	.005	.010	.002	.004	.009	.002	.004	.008	.002	.004	.008	.F..LP
.F..GN	.003	.007	.014	.003	.005	.010	.002	.004	.009	.002	.004	.008	.002	.004	.008	.F..GN
.T..GN	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.T..GN
.S..GN	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..GN
.S..HP	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..HP
.S..HN	.007	.017	.028	.005	.013	.020	.004	.011	.018	.004	.010	.016	.004	.010	.016	.S..HN

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.004	.008	.016	.003	.006	.012	.003	.005	.010	.002	.005	.009	.002	.005	.009	.F..LP
.F..GN	.004	.008	.016	.003	.006	.012	.003	.005	.010	.002	.005	.009	.002	.005	.009	.F..GN
.T..GN	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.T..GN
.S..GN	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..GN
.S..HP	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..HP
.S..HN	.008	.020	.032	.006	.015	.023	.005	.013	.020	.005	.012	.019	.005	.012	.018	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.007	.014	.028	.005	.010	.021	.005	.009	.018	.004	.008	.017	.004	.008	.017	.F..LP
.F..GN	.007	.014	.028	.005	.010	.021	.005	.009	.018	.004	.008	.017	.004	.008	.017	.F..GN
.T..GN	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.T..GN
.S..GN	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..GN
.S..HP	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..HP
.S..HN	.014	.036	.059	.010	.026	.042	.009	.023	.036	.008	.021	.034	.008	.021	.033	.S..HN

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	10%			20%			30%			40%			50–100%
.F..LP	.005	.010	.021	.004	.008	.015	.003	.007	.013	.003	.006	.012	.003	.006	.012	.F..LP
.F..GN	.005	.010	.021	.004	.008	.015	.003	.007	.013	.003	.006	.012	.003	.006	.012	.F..GN
.T..GN	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.T..GN
.S..GN	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..GN
.S..HP	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..HP
.S..HN	.010	.026	.042	.008	.019	.031	.007	.017	.027	.006	.015	.025	.006	.015	.024	.S..HN

자세히 읽기View Less

속도

권장 초기 속도[m/min]

Material Group		K110M			KC510M			KC522M			KC525M			KC725M			KCPM20			KCPK30			KTPK20
P	1	–	–	–	–	–	–	395	345	325	260	240	215	315	275	255	660	580	535	545	475	440	440	360	310
	2	–	–	–	–	–	–	330	290	240	215	190	180	260	230	195	410	370	330	335	305	275	270	225	190
	3	–	–	–	–	–	–	305	255	215	190	180	170	240	205	170	370	330	305	305	275	250	245	205	170
	4	–	–	–	295	240	200	270	225	180	170	160	145	215	180	145	275	255	230	225	210	190	185	160	130
	5	–	–	–	–	–	–	225	200	180	180	170	160	180	160	145	330	300	275	310	275	255	255	205	175
	6	–	–	–	–	–	–	200	150	120	160	145	130	160	120	95	230	200	175	190	165	–	150	125	–
M	1	–	–	–	–	–	–	245	215	200	180	170	160	205	180	165	270	240	205	250	220	190	285	235	200
	2	–	–	–	–	–	–	225	190	160	160	145	130	185	160	130	245	215	190	225	195	170	260	220	185
	3	–	–	–	–	–	–	170	145	115	110	95	85	140	120	95	195	175	150	175	160	140	195	160	–
K	1	155	145	135	350	315	285	275	250	220	–	–	–	–	–	–	435	390	350	355	320	285	275	235	195
	2	135	130	120	275	250	230	215	195	180	–	–	–	–	–	–	345	310	280	280	255	230	220	180	160
	3	120	105	95	235	205	190	180	160	145	–	–	–	–	–	–	290	255	240	235	210	195	185	150	130
N	1–2	605	565	540	770	685	630	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	495	440	385	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	50	45	35	75	65	60	45	35	30	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	50	45	35	75	65	60	45	35	30	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	60	50	35	60	55	50	55	45	30	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	85	60	45	75	60	50	75	55	35	–	–	–	–	–	–	–	–	–
H	1	–	–	–	190	155	110	145	110	85	–	–	–	–	–	–	170	140	115	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		KC110M			KC510M			KC522M			KC525M			KC725M			KCPM20			KCPK30			KTPK20
P	1	–	–	–	–	–	–	1300	1130	1060	860	790	710	1030	900	840	2170	1910	1760	1780	1560	1450	1440	1180	1010
	2	–	–	–	–	–	–	1080	950	790	710	620	590	860	760	640	1340	1210	1090	1100	1000	900	890	740	620
	3	–	–	–	–	–	–	1000	840	700	620	590	550	790	670	550	1210	1090	1000	1000	900	820	800	670	560
	4	–	–	–	960	780	660	890	730	590	550	520	470	710	590	470	910	840	760	740	690	620	600	520	430
	5	–	–	–	–	–	–	730	660	590	590	550	520	590	530	470	1090	980	900	1020	910	830	830	680	580
	6	–	–	–	–	–	–	650	490	400	520	470	430	520	400	310	760	660	570	620	540	–	500	410	–
M	1	–	–	–	–	–	–	800	710	650	590	550	520	670	590	540	880	790	680	820	720	620	940	770	650
	2	–	–	–	–	–	–	730	620	520	520	470	430	610	520	430	800	700	620	730	640	550	850	720	600
	3	–	–	–	–	–	–	550	480	370	360	310	280	460	400	310	640	570	490	570	520	460	640	530	–
K	1	510	480	450	1150	1040	940	900	820	720	–	–	–	–	–	–	1420	1280	1150	1160	1050	940	910	770	640
	2	450	420	390	910	820	760	710	640	590	–	–	–	–	–	–	1130	1010	920	920	830	760	720	590	520
	3	400	350	310	770	680	620	590	530	480	–	–	–	–	–	–	950	840	780	770	690	640	600	500	420
N	1–2	1980	1860	1770	2520	2240	2060	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1620	1440	1260	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	160	140	110	240	220	190	140	120	100	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	160	140	110	240	220	190	140	120	100	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	200	160	110	190	180	160	180	140	100	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	280	200	140	240	190	160	240	180	120	–	–	–	–	–	–	–	–	–
H	1	–	–	–	630	510	360	470	360	280	–	–	–	–	–	–	550	460	370	–	–	–	–	–	–

자세히 읽기View Less

You are about to leave the Solution building process.

Are you sure you want to leave?

제품 번호	2251757
ISO 카탈로그 ID	KDM100RD12W275
ANSI 카탈로그 ID	KDM100RD12W275
[D1MAX] Maximum Cutting Diameter	25.4 mm
[D1MAX] Maximum Cutting Diameter	1 in
[D1] Effective Cutting Diameter	13.411 mm
[D1] Effective Cutting Diameter	.528 in
[D] Adapter / Shank / Bore Diameter	31.75 mm
[D] Adapter / Shank / Bore Diameter	1.25 in
[L] Overall Length	127.762 mm
[L] Overall Length	5.03 in
[L2] Head Length	69.85 mm
[L2] Head Length	2.75 in
[AP1MAX] 1st Maximum Cutting Depth	6 mm
[AP1MAX] 1st Maximum Cutting Depth	.236 in
Number of Inserts	2
Weight Pounds	0.99
Maximum Ramping Angle	10
Gage Insert	RD.X12T3.

환영합니다

기본 설정을 확인해 주십시오

기본 설정 업데이트

제품 제안

Product Family suggestions

영업팀에 문의

영업팀에 문의

솔루션 수정

솔루션 추가

유사한 제품:

KDM • Weldon® Shank End Mills • RD.X12... • Inch

End Mills • RD.X12...

제품 번호2251757

ISO 카탈로그 IDKDM100RD12W275ANSI 카탈로그 IDKDM100RD12W275

공작물 재료

사용 및 응용 분야

특징 및 장점

인서트 선택

인서트 선택 가이드

이송량

속도

권장 초기 속도[m/min]

Recommended Starting Speeds [SFM]

제품 제안

Product Family suggestions

영업팀에 문의

알림

영업팀에 문의

유사한 제품:

KDM • Weldon® Shank End Mills • RD.X12... • Inch

End Mills • RD.X12...

제품 번호2251757

ISO 카탈로그 IDKDM100RD12W275ANSI 카탈로그 IDKDM100RD12W275

Sending to {{cadTool}} in progress...

공작물 재료

사용 및 응용 분야

특징 및 장점

인서트 선택

인서트 선택 가이드

이송량

속도

권장 초기 속도[m/min]

Recommended Starting Speeds [SFM]

The following files are available