Parallel Thread Mills

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (23)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(23)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(23)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(23)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(23)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(23)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(23)
    • M Stainless Steel (23)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(23)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(23)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(23)
    • K Cast Iron (23)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
    • S High-Temp Alloys (15)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(15)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(15)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(15)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(15)
    • H Hardened Materials (23)
      • H1
        Hardened Materials 44-48 HRC(23)
    Applications
    Applications
    • Thread MillingThread Milling (25)
    • ThreadingThreading (25)
    Cutting Diameter
    Cutting Diameter
    • 0.354 in(4)
    • 0.45 in(2)
    • 0.453 in(2)
    • 0.61 in(1)
    • 0.669 in(1)
    • 0.67 in(1)
    • 0.787 in(1)
    • 0.79 in(1)
    • 0.866 in(1)
    • 0.87 in(1)
    • 0.984 in(1)
    • 1.18 in(2)
    • 1.181 in(2)
    • 1.379 in(1)
    • 1.457 in(2)
    • 1.46 in(1)
    • 1.811 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.0 mm(4)
    • 11.425 mm(2)
    • 11.5 mm(2)
    • 15.5 mm(1)
    • 17.0 mm(1)
    • 17.026 mm(1)
    • 20.0 mm(1)
    • 20.076 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 25.0 mm(1)
    • 29.975 mm(2)
    • 30.0 mm(2)
    • 35.0 mm(1)
    • 37.0 mm(2)
    • 37.075 mm(1)
    • 46.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Length
    Cutting Length
    • 10.4 mm(4)
    • 10.925 mm(2)
    • 11.0 mm(2)
    • 16.0 mm(7)
    • 26.925 mm(3)
    • 27.0 mm(5)
    • 38.5 mm(2)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.41 in(4)
    • 0.43 in(2)
    • 0.433 in(2)
    • 0.63 in(7)
    • 1.06 in(3)
    • 1.063 in(5)
    • 1.516 in(2)
    Cutting Length MintoCutting Length Max
    Type of Thread
    Type of Thread
    • BSW (25)
    • M (25)
    • NPS (7)
    • NPT (11)
    • NPTF (11)
    • UN (15)
    Reach
    Reach
    • 0.472 in(1)
    • 0.473 in(3)
    • 0.669 in(2)
    • 0.787 in(1)
    • 0.79 in(1)
    • 0.807 in(1)
    • 0.866 in(1)
    • 0.87 in(1)
    • 0.984 in(1)
    • 1.0 in(1)
    • 1.575 in(1)
    • 1.68 in(1)
    • 1.693 in(1)
    • 2.031 in(1)
    • 2.047 in(1)
    • 2.165 in(1)
    • 2.283 in(1)
    • 3.531 in(1)
    • 3.622 in(1)
    • 3.858 in(1)
    • 3.938 in(1)
    • 4.0 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 11.951 mm(1)
    • 12.0 mm(3)
    • 17.0 mm(2)
    • 20.0 mm(1)
    • 20.076 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 25.0 mm(1)
    • 25.401 mm(1)
    • 40.0 mm(1)
    • 42.676 mm(1)
    • 43.0 mm(1)
    • 51.551 mm(1)
    • 52.0 mm(1)
    • 55.0 mm(1)
    • 58.0 mm(1)
    • 89.65 mm(1)
    • 92.0 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 101.601 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (15)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (11)
    • 2.0 (25)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 2.717 in(1)
    • 2.721 in(1)
    • 2.75 in(1)
    • 2.757 in(1)
    • 3.301 in(1)
    • 3.307 in(1)
    • 3.346 in(1)
    • 3.5 in(1)
    • 3.543 in(1)
    • 3.56 in(1)
    • 3.583 in(1)
    • 3.74 in(1)
    • 3.75 in(1)
    • 3.858 in(1)
    • 4.331 in(1)
    • 4.38 in(1)
    • 4.529 in(1)
    • 4.724 in(1)
    • 4.921 in(1)
    • 5.0 in(1)
    • 5.88 in(1)
    • 5.906 in(1)
    • 6.299 in(1)
    • 6.33 in(1)
    • 6.694 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 69.0 mm(1)
    • 69.101 mm(1)
    • 69.851 mm(1)
    • 70.0 mm(1)
    • 83.825 mm(1)
    • 84.0 mm(1)
    • 85.0 mm(1)
    • 88.9 mm(1)
    • 90.0 mm(1)
    • 90.426 mm(1)
    • 91.0 mm(1)
    • 95.0 mm(1)
    • 95.25 mm(1)
    • 98.0 mm(1)
    • 110.0 mm(1)
    • 111.25 mm(1)
    • 115.0 mm(1)
    • 120.0 mm(1)
    • 125.0 mm(1)
    • 127.0 mm(1)
    • 149.35 mm(1)
    • 150.0 mm(1)
    • 160.0 mm(1)
    • 160.775 mm(1)
    • 170.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (21)
    • KC620M (25)
    • KC635M (23)
    Front-End
    Thread TPI
    Thread TPI
    • 4.5 (2)
    • 6.0 (8)
    • 7.0 (8)
    • 8.0 (8)
    • 9.0 (8)
    • 10.0 (8)
    • 11.0 (15)
    • 11.5 (7)
    • 12.0 (15)
    • 14.0 (19)
    • 16.0 (19)
    • 18.0 (15)
    • 19.0 (15)
    • 20.0 (15)
    • 24.0 (11)
    • 27.0 (7)
    • 28.0 (4)
    • 32.0 (7)
    Thread TPI MintoThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.5 mm(4)
    • 0.75 mm(11)
    • 1.0 mm(15)
    • 1.25 mm(15)
    • 1.5 mm(23)
    • 1.75 mm(7)
    • 2.0 mm(15)
    • 2.5 mm(8)
    • 3.0 mm(8)
    • 3.5 mm(8)
    • 4.0 mm(8)
    • 4.5 mm(8)
    • 5.0 mm(2)
    Thread Pitch MintoThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.02 in(4)
    • 0.03 in(11)
    • 0.039 in(15)
    • 0.049 in(15)
    • 0.06 in(23)
    • 0.069 in(7)
    • 0.079 in(15)
    • 0.098 in(8)
    • 0.119 in(8)
    • 0.138 in(8)
    • 0.157 in(8)
    • 0.177 in(8)
    • 0.197 in(2)
    Thread Pitch MintoThread Pitch Max
    Neck Diameter
    Neck Diameter
    • 0.268 in(2)
    • 0.351 in(2)
    • 0.48 in(1)
    • 0.535 in(1)
    • 0.654 in(1)
    • 0.732 in(1)
    • 0.748 in(1)
    • 0.946 in(2)
    • 1.063 in(1)
    • 1.22 in(2)
    • 1.496 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 6.801 mm(2)
    • 8.9 mm(2)
    • 12.201 mm(1)
    • 13.601 mm(1)
    • 16.6 mm(1)
    • 18.6 mm(1)
    • 19.0 mm(1)
    • 24.0 mm(2)
    • 27.0 mm(1)
    • 31.0 mm(2)
    • 38.0 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(2)
    • 12.701 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(4)
    • 25.401 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(3)
    • 40.0 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.473 in(2)
    • 0.5 in(2)
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.75 in(3)
    • 0.787 in(3)
    • 0.984 in(4)
    • 1.0 in(3)
    • 1.25 in(1)
    • 1.26 in(3)
    • 1.575 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?