Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 4115433 |
| ISO Catalog ID | DFT05T308ST |
| ANSI Catalog ID | DFT05T308ST |
| Grade | KD1425 |
| [L10] Insert Cutting Edge Length | 5.19 mm |
| [L10] Insert Cutting Edge Length | .205 in |
| [D] Insert IC Size | 8 mm |
| [D] Insert IC Size | .315 in |
| [D1] Insert Hole Size | 3.4 mm |
| [D1] Insert Hole Size | .134 in |
| [S] Insert Thickness | 3.75 mm |
| [S] Insert Thickness | .148 in |
| [Rε] Corner Radius | 0.8 mm |
| [Rε] Corner Radius | .0312 in |
Grades
KD1425
Composition: A multimodal PCD grade with a range of grain sizes brazed onto a carbide substrate.
Application: Engineered for extreme abrasion resistance, combined with good edge strength for demanding applications. An ideal choice for high-silicon aluminium alloys, bi-metallic (AL/GCI) materials, MMC, carbon-fibre reinforced plastics, and other abrasive non-metallic materials.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
| D | LS | CS |
| 32 | 58 | R 1/4 BSP |
| 40 | 68 | R 1/4 BSP |
| 50 | 68 | R 1/4 BSP |
| Metric | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03 16 | DFT05 25 | DFT06 33 | DFT07 41 | DFT09 49 | DFT11 69 | ||||||
| N | 1 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
| I | ST/C | KD1425 | |||||||||||||
| 2 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| 3 | S | O | ST/C | KD1425 | 413 | 619 | 743 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| 4 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| 5 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| I | ST/C | KD1425 | |||||||||||||
| Inch | |||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
| Range | |||||||||||||||
| Min | Starting Value | Max | Ø | DFT03 .625–.969" | DFT05 .984–1.250" | DFT06 1.313–1.563" | DFT07 1.625–1.875" | DFT09 1.938–2.125" | DFT11 2.750–3.250" | ||||||
| N | 1 | S | O | ST/C | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| I | ST/C | KD1425 | |||||||||||||
| 2 | S | O | ST/C | KD1425 | 1465 | 2197 | 2636 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| 3 | S | O | ST/C | KD1425 | 1355 | 2032 | 2438 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| 4 | S | O | ST/C | KD1425 | 1465 | 2197 | 2636 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| 5 | S | O | ST/C | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| I | ST/C | KD1425 | |||||||||||||
| Metric | |||||||||||||||
| Cutting Speed | |||||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03 16 | DFT05 25 | DFT06 33 | DFT07 41 | DFT09 49 | DFT11 69 | |
| N | 1 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
| 1 | S | I | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 2 | S | I | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | S | O | ST/C | KD1425 | 413 | 619 | 743 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 3 | S | I | ST/C | KD1425 | 413 | 619 | 743 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 4 | S | I | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
| 5 | S | I | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?