Willkommen
Bestätigen Sie bitte Ihre Präferenzen
Einstellungen aktualisieren

Produktvorschläge

Product Family suggestions

Kennametal steht Ihnen zur Diensten

Kundendienstv

Hier finden Sie die Kontaktdaten von unseren Kundendienstzentren rund um den Globus.

Schnellbestellung
Artikel erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Mehr bekommen, weniger zahlen mit unseren zeitlich begrenzten angeboten. Jetzt bestellen

Kennametal steht Ihnen zur Diensten

Kundendienst

Hier finden Sie die Kontaktdaten von unseren Kundendienstzentren rund um den Globus.

Artikel erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Exit Search Zurück zur Lösung

Lösung bearbeiten

Lösung hinzufügen

Lösungsname:{{SolutionName}}

    Produkt ähnlich wie:

    Zurück zu | Ändern ähnlich zu

    DFSP Weldon-Schaft • DIN 1835-1 Form B • 2 x D

    Drill Fix™ DFSP™ Werkzeugkörper

    Material Nummer100056576

    DFSP Weldon-Schaft • DIN 1835-1 Form B • 2 x D
    DFSP Weldon-Schaft • DIN 1835-1 Form B • 2 x D
    DFSP Weldon-Schaft • DIN 1835-1 Form B • 2 x D
    Open expanded view
    DFSP Weldon-Schaft • DIN 1835-1 Form B • 2 x D
    DFSP Weldon-Schaft • DIN 1835-1 Form B • 2 x D
    Allgemeine Darstellung
    Kontaktieren Sie unser Verkaufsteam, um alle Ihre Preisoptionen zu erfahren.

    Features and benefits

    • DFSP vereint die wirtschaftliche quadratische Form der außen angeordneten Wendeschneidplatte mit den überlegenen Zentriereigenschaften der innen angeordneten Trigon Wendeschneidplatte.
    • Bohrer wird mit Wendeschneidplatten-Schrauben, Seitenrohrverschluss und Torxschlüssel geliefert.
    • Wendeschneidplatten für DFSP bitte getrennt bestellen. Siehe Seiten [REFERENZ] für Wendeschneidplatten.
    • DrillingDrilling
    • Drilling: Inclined EntryDrilling: Inclined Entry
    • Drilling: Inclined ExitDrilling: Inclined Exit
    • Drilling: X-OffsetDrilling: X-Offset
    • Zylinderschaft – mit SpannflächeZylinderschaft – mit Spannfläche
    • Bohren: Konvexe EintrittsflächeBohren: Konvexe Eintrittsfläche
    • Drilling - Through CoolantDrilling - Through Coolant
    • Bohren: SacklochbohrungBohren: Sacklochbohrung
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    WARNUNG • Drill Fix DFR

    WARNUNG! Beim Austritt des Bohrers aus dem Werkstück entsteht eine Federscheibe. Bei drehendem Werkstück wird die Scheibe vom Werkstück weggeschleudert! Entsprechende Sicherheitsvorkehrungen sind erforderlich!
    DLSCS
    2045—
    3258R 1/4 BSP *
    4068R 1/4 BSP
    5068R 1/4 BSP
    DLS
    2050
    2556
    3260
    4070
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    P1SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    2SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    3SOMDKCPK10260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOFPKCU25180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU40110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    4SOFPKCPK10220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU25150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKCU4090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    5SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    6SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    IMDKC7140
    UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IMDKC7140
    Metrisch
    Schnittgeschwindigkeit vcMetrisch
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeZustandPlattensitzGeometrieSorteMin.StartwertMax.ØSPGX05 DFTX2 14,00-17,49SPGX06 DFT03 17,50-21,99SPGX07 DFT05 22.00-25,99SPGX09 DFT05 26.00-32,99SPGX12 DFT06/..07 33,00-43,99SPGX15 DFT07/..09 44,00-55,00
    P1SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    1SIMDKC7140310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    1UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1UIMDKC7140200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIMDKC7140130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOMDKCPK10310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    2SIMDKC7140310325360mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    2UOFPKCU25200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2UIMDKC7140200215230mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IOHPKCU40130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIMDKC7140130135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOMDKCPK10260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    3SIMDKC7140260285320mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    3UOFPKCU25180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3UIMDKC7140180195220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IOHPKCU40110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIMDKC7140110120140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4SOFPKCPK10220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    4SIMDKC7140220250300mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    4UOHPKCU25150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4UIMDKC7140150180220mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IOHPKCU4090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IIMDKC714090110140mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    5SIMDKC7140180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    5UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5UIMDKC7140120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IIMDKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6SOHPKCU25180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    6SIMDKC7140180200220mm/r0,06–0,110,08–0,140,10–0,180,14–0,250,16–0,300,18–0,30
    6UOHPKCU40120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6UIMDKC7140120135150mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6IOHPKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    6IIMDKC71407085100mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    M1SOFPKCU25150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IMDKC7140
    UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IMDKC7140
    IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOFPKCU25150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IMDKC7140
    UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IMDKC7140
    IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOHPKCU25100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    UOHPKCU4080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    IHPKC7140
    IOMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    IMDKC7140
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax.ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    M1SOFPKCU25150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1SIMDKC7140150190230mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    1UIMDKC7140100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    1IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    2SOFPKCU25150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2SIMDKC7140150180210mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UOMDKCU40100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    2UIMDKC7140100130160mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    2IOMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    3SOHPKCU25100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3SIHPKC7140100130160mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UOHPKCU4080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    3UIHPKC714080110140mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,20
    3IOMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,03–0,050,04–0,070,05–0,090,07–0,130,08–0,160,10–0,18
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax. Ø
    N1SOLPKCU40150190230mm/r0,06-0,080,06-0,100,08-0,120,10-0,160,12-0,0210,14-0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,014
    IDSKCU40
    2SOLPKCU40150180210mm/r0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    3SOLPKCU40150190230mm/r0,06-0,080,06-0,100,08-0,120,10-0,160,12-0,0210,14-0,024
    IDSKCU40
    UOLPKCU40100130160mm/r0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/r0,05-0,070,06-0,080,07-0,100,05-0,100,06-0,0130,08-0,014
    IDSKCU40
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax.ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    K1SOFPKCPK10200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1SIHPKCU40200240300mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1UOFPKCU25120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UIHPKC7140120155200mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1IOFPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIHPKC714080100125mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOFPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2SIHPKCU40180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UIHPKC7140110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOHPKCPK10180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3SIHPKCU40180220260mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3UOHPKCU25110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UIHPKC7140110140170mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3IOHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIHPKC714080100120mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    K1SOFPKCPK10200240300mm/U0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOFPKCU25120155200mm/U0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOFPKC714080100125mm/U0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    2SOFPKCPK10180220260mm/U0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOHPKCU25110140170mm/U0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOHPKC714080100120mm/U0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    3SOHPKCPK10180220260mm/U0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    IHPKCU40
    UOHPKCU25110140170mm/U0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    IHPKC7140
    IOHPKC714080100120mm/U0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    IHPKC7140
    N1SOLPKCU40150190230mm/U0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/U0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/U0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    2SOLPKCU40150180210mm/U0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/U0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/U0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    3SOLPKCU40150190230mm/U0,06–0,080,06–0,100,08–0,120,10–0,160,12–0,0210,14–0,024
    IDSKCU40
    UOLPKCU40100130160mm/U0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,016
    IDSKCU40
    IOLPKCU406080100mm/U0,05–0,070,06–0,080,07–0,100,05–0,100,06–0,0130,08–0,014
    IDSKCU40
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax.ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    N1SOHPKCPK10350500650mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1SIHPKMF350500650mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    1UOHPKCU40300400500mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1UIHPKMF300400500mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    1IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    1IIHPKMF200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2SOHPKCPK10300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2SIHPKMF300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    2UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    2IOHPKCU40175250325mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    2IIHPKMF175250325mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3SOHPKCPK10300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3SIHPKMF300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    3UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    3IOHPKCU40150250350mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    3IIHPKMF150250350mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4SOHPKCU25300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    4SIHPKC7140300400500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    4UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    4UIHPKC7140250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    4IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    4IIHPKC7140200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5SOHPKCU40400450500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    5SIHPKMF400450500mm/r0,07–0,120,10–0,160,12–0,200,16–0,280,18–0,320,20–0,34
    5UOHPKCU40250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    5UIHPKMF250350450mm/r0,05–0,090,06–0,120,08–0,150,12–0,200,14–0,250,16–0,28
    5IOHPKCU40200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    5IIHPKMF200300400mm/r0,04–0,060,05–0,080,06–0,100,09–0,150,11–0,180,13–0,25
    Metrisch
    WerkstoffgruppeSchnitt- bedingungPlattensitzGeometrieSorteSchnittgeschwindigkeit vcEmpfohlene Vorschubrate (fz) pro Durchmesser
    Bereich m/min
    Min.StartwertMax.ØSPGX05 DFTX2 14–17,49SPGX06 DFT03 17,5–21,99SPGX07 DFT05 22,00–25,99SPGX09 DFT05 26,00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    S1SOHPKCU40607075mm/U0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40405060mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40253040mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOHPKCU40506070mm/U0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40304050mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40253040mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOHPKCU40708090mm/U0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40506070mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40304050mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    4SOHPKCU40708090mm/U0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    IMDKC7140
    UOHPKCU40506070mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    IOHPKCU40304050mm/U0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    IMDKC7140
    Metrisch
    Schnittgeschwindigkeit vc
    Bereich m/minEmpfohlene Vorschubrate (fz) pro Durchmesser
    WerkstoffgruppeSchnitt– bedingungPlattensitzGeometrieSorteMin.StartwertMax.ØSPGX05 DFTX2 14,00–17,49SPGX06 DFT03 17,50–21,99SPGX07 DFT05 22.00–25,99SPGX09 DFT05 26.00–32,99SPGX12 DFT06/..07 33,00–43,99SPGX15 DFT07/..09 44,00–55,00
    S1SOHPKCU40607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    1SIMDKC7140607075mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    1UOHPKCU40405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1UIMDKC7140405060mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2SOHPKCU40506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    2SIMDKC7140506070mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    2UOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2UIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2IOHPKCU40253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    3SIMDKC7140708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    3UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3UIMDKC7140506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    3IIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4SOHPKCU40708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    4SIMDKC7140708090mm/r0,03–0,060,04–0,080,05–0,100,08–0,120,10–0,150,12–0,18
    4UOHPKCU40506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4UIMDKC7140506070mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4IOHPKCU40304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    4IIMDKC7140304050mm/r0,02–0,030,02–0,040,03–0,050,04–0,060,05–0,080,06–0,10
    Sie sind im Begriff, zu Ihrer MySolutions-Seite hinzuzufügen.. Möchten Sie fortfahren?
    Select the destination where you want to move bis.
    Neu Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Geben Sie einen gültigen Namen ein.
    product-image
    Please adjust the following properties from

    ISO Katalog

    ANSI Katalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Sie sollten angemeldet sein, um Ihre Dashboard-Informationen zu sehen
    Session expired due to inactivity, please login again
    Das/die Produkt/e (), das/die Sie dem Warenkorb hinzufügen wollten, ist/sind nicht verfügbar. Bitte wenden Sie sich an den Kundendienst.
    Artikel erfolgreich zum Warenkorb hinzugefügt
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk