KM4X™
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (169)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(169)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(169)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(169)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(169)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(169)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(169)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(169)
- M Rostfreier Stahl (167)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(167)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(167)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(167)
- K Gusseisen (169)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(169)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(169)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(169)
- N Buntmetalle (157)
- N1Geschmiedetes Aluminium (157)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(155)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(103)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (157)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (155)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (155)
- N7MMCs (147)
- S Hochwarmfeste Legierungen (163)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(163)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(163)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(163)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(163)
- H Gehärtete Werkstoffe (129)
- H1Gehärtete Werkstoffe 44-48 HRC(129)
- H2Gehärtete Werkstoffe 48-55 HRC(129)
- H3Gehärtete Werkstoffe 56-60 HRC(127)
- H4Gehärtete Werkstoffe >60 HRC(111)
- C Verbundwerkstoffe (CFRP) (130)
- C1CFRP, CFRP / CFRP (130)
- C2CFRP / Aluminium CFRP / Nichteisen (126)
Anwendungen
Anwendungen
Chamfer Turning (17)
Cut-Off (4)
Deep Grooving (20)
Face Grooving (6)
Facing (133)
Grooving (20)
ID Facing (80)
ID Grooving (16)
ID Thread Turning (22)
Multiple Direction Cutting (99)
OD Thread Turning (26)
Plunge Turning (16)
Profiling (81)
TRN Boring (122)
Turning (141)
Gewindeart
Gewindeart
- 55 (8)
- 60 (22)
- ACME (24)
- API (20)
- API BUTTRESS (4)
- API RD (14)
- BSPT (4)
- BSW (16)
- BUTTRESS (14)
- M (16)
- NPT (12)
- NPTF (4)
- RD DIN 405 (8)
- STUB ACME (16)
- TR DIN 103 (8)
- UN (18)
- UNJ (12)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (154)
- Lightly Interrupted Cut (158)
- Smooth Cut (160)
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 0.0 (2)
- 45.0 (5)
- 48.0 (5)
- 49.683 (2)
- 50.0 (2)
- 72.5 (1)
- 75.0 (17)
- 90.0 (54)
- 93.0 (35)
- 95.0 (42)
- 107.5 (10)
bis
Anschlussart
Anschlussart
- KM (94)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 0.0 (6)
- 1.0 (100)
- 2.0 (116)
- 3.0 (34)
- 4.0 (88)
- 6.0 (18)
- 8.0 (54)
bis
Innere Kühlmittelzuführung
Innere Kühlmittelzuführung
Gesamtlänge [L]
Gesamtlänge [L]
- 2.757 in(77)
- 3.938 in(51)
- 4.331 in(1)
- 4.529 in(12)
- 4.921 in(6)
- 5.513 in(22)
- 6.694 in(6)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 70.0 mm(77)
- 100.0 mm(51)
- 110.0 mm(1)
- 115.0 mm(12)
- 125.0 mm(6)
- 140.0 mm(22)
- 170.0 mm(6)
bis
Eckenradius
Eckenradius
- 0.001 in(3)
- 0.002 in(26)
- 0.003 in(18)
- 0.004 in(88)
- 0.005 in(9)
- 0.006 in(17)
- 0.007 in(15)
- 0.008 in(85)
- 0.01 in(15)
- 0.011 in(10)
- 0.012 in(11)
- 0.014 in(38)
- 0.015 in(1)
- 0.016 in(117)
- 0.017 in(4)
- 0.019 in(14)
- 0.02 in(9)
- 0.021 in(3)
- 0.023 in(18)
- 0.024 in(10)
- 0.027 in(2)
- 0.028 in(1)
- 0.03 in(1)
- 0.031 in(129)
- 0.033 in(6)
- 0.035 in(14)
- 0.037 in(2)
- 0.038 in(1)
- 0.039 in(10)
- -0.039 in(6)
- 0.047 in(129)
- 0.049 in(8)
- 0.055 in(1)
- 0.06 in(9)
- 0.062 in(26)
- 0.063 in(119)
- 0.069 in(8)
- 0.078 in(8)
- 0.079 in(14)
- 0.089 in(14)
- 0.094 in(23)
- 0.095 in(56)
- 0.098 in(6)
- 0.125 in(12)
- 0.126 in(23)
- 0.157 in(4)
- 0.237 in(1)
- 0.25 in(2)
- 0.315 in(3)
- 0.375 in(2)
- 0.394 in(1)
- 0.492 in(1)
- 0.5 in(2)
- 0.63 in(1)
bis
Eckenradius
Eckenradius
- 0.025 mm(3)
- 0.05 mm(26)
- 0.076 mm(18)
- 0.1 mm(88)
- 0.125 mm(9)
- 0.151 mm(17)
- 0.176 mm(15)
- 0.2 mm(85)
- 0.225 mm(9)
- 0.25 mm(15)
- 0.275 mm(10)
- 0.301 mm(11)
- 0.325 mm(19)
- 0.351 mm(33)
- 0.375 mm(1)
- 0.4 mm(117)
- 0.426 mm(4)
- 0.45 mm(14)
- 0.476 mm(4)
- 0.5 mm(9)
- 0.525 mm(3)
- 0.576 mm(18)
- 0.601 mm(10)
- 0.65 mm(2)
- 0.701 mm(1)
- 0.75 mm(1)
- 0.775 mm(8)
- 0.8 mm(121)
- 0.826 mm(6)
- 0.9 mm(14)
- 0.925 mm(2)
- 0.976 mm(1)
- 1.0 mm(10)
- -1.0 mm(6)
- 1.201 mm(129)
- 1.25 mm(8)
- 1.401 mm(1)
- 1.5 mm(8)
- 1.526 mm(1)
- 1.576 mm(26)
- 1.6 mm(119)
- 1.75 mm(8)
- 1.975 mm(8)
- 2.0 mm(14)
- 2.25 mm(14)
- 2.375 mm(23)
- 2.401 mm(56)
- 2.5 mm(6)
- 3.176 mm(12)
- 3.2 mm(23)
- 4.0 mm(4)
- 6.0 mm(1)
- 6.351 mm(2)
- 8.0 mm(3)
- 9.525 mm(2)
- 10.0 mm(1)
- 12.5 mm(1)
- 12.701 mm(2)
- 16.0 mm(1)
bis
application
Minimale Schnitttiefe
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- 13E (77)
- 241 (18)
- AC5 (1)
- CG4 (1)
- CL4 (57)
- CM2 (72)
- CM3 (64)
- CM4 (33)
- CM5 (2)
- CPX (80)
- CW2 (37)
- CW2015 (76)
- CW5025 (80)
- GH1 (2)
- GX (44)
- HCK10 (7)
- HCK20 (1)
- HK1500 (76)
- HK35 (7)
- HT2 (58)
- HTX (37)
- HWK15 (7)
- K00326 (8)
- K00331 (2)
- K060 (33)
- K090 (86)
- K1 (39)
- K1010P (2)
- K10M (109)
- K10P (99)
- K10U (84)
- K15 (3)
- K15U (84)
- K20K (105)
- K21 (43)
- K25M (86)
- K25P (90)
- K2885 (8)
- K313 (142)
- K35P (62)
- K420 (90)
- K45 (41)
- K4H (8)
- K68 (139)
- K8735 (8)
- KB1340 (27)
- KB1345 (47)
- KB1610 (53)
- KB1625 (49)
- KB1630 (47)
- KB5610 (52)
- KB5625 (57)
- KB5630 (36)
- KB9610 (78)
- KB9640 (39)
- KBH10 (72)
- KBH10B (47)
- KBH20 (87)
- KBH20B (47)
- KBK35 (18)
- KC210 (70)
- KC250 (77)
- KC5010 (157)
- KC5020P (8)
- KC5025 (152)
- KC5410 (134)
- KC5510 (94)
- KC5525 (65)
- KC710 (38)
- KC720 (110)
- KC722 (34)
- KC730 (130)
- KC7310 (100)
- KC732 (95)
- KC8050 (139)
- KC810 (143)
- KC850 (159)
- KC9010 (95)
- KC9025 (132)
- KC910 (132)
- KC9105 (117)
- KC9110 (151)
- KC9120 (129)
- KC9125 (137)
- KC9125RR (11)
- KC9140 (107)
- KC9145 (103)
- KC9210 (19)
- KC9215 (92)
- KC9225 (121)
- KC9240 (126)
- KC9240NEW (122)
- KC9245 (94)
- KC9315 (132)
- KC9320 (128)
- KC9325 (113)
- KC935 (143)
- KC950 (135)
- KC990 (109)
- KCD25 (35)
- KCK05 (121)
- KCK05B (106)
- KCK15 (116)
- KCK15B (125)
- KCK20 (134)
- KCK20B (138)
- KCM15 (113)
- KCM15B (111)
- KCM25 (129)
- KCM25B (117)
- KCM25S (2)
- KCM35 (111)
- KCM35B (82)
- KCP05 (107)
- KCP05B (81)
- KCP10 (137)
- KCP10B (142)
- KCP15 (6)
- KCP20S (2)
- KCP25 (140)
- KCP25B (149)
- KCP25C (139)
- KCP30 (128)
- KCP30B (103)
- KCP40 (101)
- KCP40B (109)
- KCPK05 (94)
- KCS10 (39)
- KCS10B (116)
- KCS25S (2)
- KCU10 (153)
- KCU10B (146)
- KCU25 (141)
- KCU25B (136)
- KD050 (59)
- KD081 (63)
- KD100 (53)
- KD120 (63)
- KD1400 (52)
- KD1405 (34)
- KD1425 (68)
- KM1 (36)
- KMF (18)
- KN10S (2)
- KS15 (26)
- KT1120 (16)
- KT125 (70)
- KT150 (43)
- KT175 (76)
- KT315 (113)
- KT325 (58)
- KT5020 (2)
- KTP10 (80)
- KTP25S (71)
- KU10 (8)
- KU10T (105)
- KU25T (16)
- KU30T (129)
- KY1310 (51)
- KY1320 (86)
- KY1540 (47)
- KY1615 (82)
- KY2000 (49)
- KY2100 (33)
- KY3000 (96)
- KY3400 (69)
- KY3500 (90)
- KY4000 (35)
- KY4300 (42)
- KY4400 (88)
- KYHK15B (88)
- KYK10 (43)
- KYK25 (65)
- KYK35 (90)
- KYS25 (41)
- KYS30 (51)
- MC2 (2)
- NL200 (37)
- NL250 (94)
- NL300 (85)
- NL400 (47)
- NL920 (76)
- P25 (34)
- PB100 (26)
- PB170 (29)
- PB250 (31)
- PB300 (18)
- PD100 (7)
- PD50 (7)
- PN120 (1)
- PS5 (39)
- SP0819 (73)
- SP0A00 (7)
- SP0PW3 (5)
- SP3019 (61)
- SP4019 (70)
- SP4036 (2)
- SP4066 (1)
- SP4093 (2)
- SP61EJ (7)
- SPADAP (19)
- SPN4W2 (4)
- THM (69)
- THM-X (51)
- THMF-X (25)
- TN10P (120)
- TN10U (89)
- TN15M (109)
- TN15U (84)
- TN2000 (85)
- TN20K (113)
- TN20P (117)
- TN30M (111)
- TN30P (94)
- TN4000 (78)
- TN5015 (100)
- TN5020 (102)
- TN5105 (83)
- TN5120 (110)
- TN6010 (72)
- TN6025 (86)
- TN7005 (71)
- TN7010 (110)
- TN7015 (119)
- TN7025 (119)
- TN7035 (102)
- TN7105 (69)
- TN7110 (118)
- TN7115 (117)
- TN7125 (111)
- TN7135 (102)
- TN8025 (110)
- TTI15 (48)
- TTM (6)
- TTM09 (24)
- TTR (44)
- TTR-X (4)
- TTS (57)
- TTX (51)
- W00342 (13)
- WBH10C (72)
- WBH10P (36)
- WBH10U (53)
- WBH20P (77)
- WBH25P (43)
- WBH25U (66)
- WBH30P (36)
- WBK40U (27)
- WBK45U (58)
- WDN00U (26)
- WDN25U (52)
- WK05CT (107)
- WK15CT (73)
- WK20CT (118)
- WM15CT (113)
- WM25CT (116)
- WM35CT (94)
- WP05CT (28)
- WP15CT (125)
- WP20TT (4)
- WP25CT (125)
- WP35CT (119)
- WS10PT (105)
- WS25PT (102)
- WU05PT (13)
- WU10HT (113)
- WU10PT (83)
- WU25PT (80)
- X00511 (18)
- X00580 (18)
- X00581 (18)
- X00582 (18)
- X00583 (18)
- X00584 (18)
- X00585 (18)
- X00586 (18)
- X00591 (18)
- X00592 (18)
- X00593 (18)
- X00594 (18)
- X00596 (18)
- X00597 (18)
- X00599 (18)
Schneidrichtung
Schneidrichtung
- L (44)
- N (7)
- R (43)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (171)
- Y (59)
F Abmessung
F Abmessung
- 0.0 mm(3)
- 8.0 mm(1)
- 10.0 mm(1)
- 12.5 mm(1)
- 16.0 mm(1)
- 17.0 mm(6)
- 22.0 mm(12)
- 27.0 mm(10)
- 35.0 mm(6)
- 38.0 mm(4)
- 43.0 mm(35)
- 58.0 mm(8)
- 63.0 mm(6)
bis
F Abmessung
F Abmessung
- 0.0 in(3)
- 0.315 in(1)
- 0.394 in(1)
- 0.492 in(1)
- 0.63 in(1)
- 0.669 in(6)
- 0.866 in(12)
- 1.063 in(10)
- 1.379 in(6)
- 1.496 in(4)
- 1.693 in(35)
- 2.283 in(8)
- 2.48 in(6)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(4)
- -1.0 mm(4)
- 32.0 mm(6)
- 40.0 mm(12)
- 41.301 mm(2)
- 47.6 mm(2)
- 50.0 mm(10)
- 57.2 mm(2)
- 63.0 mm(6)
- 80.0 mm(4)
- 86.0 mm(38)
- 88.9 mm(2)
- 100.0 mm(12)
- 120.0 mm(33)
- 139.701 mm(2)
- 174.601 mm(2)
- 209.601 mm(2)
- 222.3 mm(2)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 in(4)
- -0.039 in(4)
- 1.26 in(6)
- 1.575 in(12)
- 1.627 in(2)
- 1.874 in(2)
- 1.969 in(10)
- 2.253 in(2)
- 2.48 in(6)
- 3.15 in(4)
- 3.386 in(38)
- 3.5 in(2)
- 3.938 in(12)
- 4.724 in(33)
- 5.5 in(2)
- 6.875 in(2)
- 8.252 in(2)
- 8.752 in(2)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -0.039 in(6)
- 393.661 in(19)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 mm(6)
- 9999.0 mm(19)
bis
Schneidrichtung
Schneidrichtung
- B (22)
- E (24)
- S (48)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (61)
- NEGATIVE-ZERO (13)
- NEUTRAL (ZERO) (15)
Bohrungstiefe min.
Bohrungstiefe min.
- 2.757 in(42)
- 3.477 in(6)
- 3.938 in(33)
- 4.42 in(12)
- 4.485 in(3)
- 4.49 in(7)
- 4.529 in(12)
- 5.671 in(6)
bis
Bohrungstiefe min.
Bohrungstiefe min.
- 70.0 mm(42)
- 88.325 mm(6)
- 100.0 mm(33)
- 112.275 mm(12)
- 113.926 mm(3)
- 114.051 mm(7)
- 115.0 mm(12)
- 144.05 mm(6)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- S (40)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BOEING TAPER FLANGE (1)
- BORING BAR ADAPTER (2)
- CARTRIDGE MOUNT (12)
- COMBI SHELL ADAPTER (5)
- CUTOFF SUPPORT BLADE (6)
- END MILL ADAPTER (44)
- ER COLLET CHUCK (16)
- FM ADAPTER (1)
- HTS MODULAR ADAPTER (2)
- HYDRAULIC CHUCK (59)
- HYDRAULIC CHUCK-HIGH TORQUE (9)
- HYDRAULIC CHUCK-SLIM LINE (7)
- KM MODULAR ADAPTER (25)
- REDUCER (4)
- SCREW-ON ADAPTER (19)
- SHELL MILL ADAPTER (64)
- SHRINK FIT ADAPTER (93)
- SQUARE SHANK ADAPTER (17)
- TUNABLE SHELL MILL ADAPTER (6)
- WHISTLE DRIVE ADAPTER (1)
- WHISTLE NOTCH ADAPTER (20)
Spannsystem
Spannsystem
- D (41)
- M (33)
- N (28)
- P (35)
- S (35)
- X (3)
Schnittbreite
Schnittbreite
- 0.039 in(8)
- 0.047 in(8)
- 0.06 in(8)
- 0.062 in(8)
- 0.069 in(8)
- 0.073 in(8)
- 0.078 in(8)
- 0.079 in(8)
- 0.088 in(8)
- 0.089 in(4)
- 0.094 in(4)
- 0.095 in(8)
- 0.097 in(8)
- 0.098 in(8)
- 0.105 in(8)
- 0.108 in(8)
- 0.11 in(8)
- 0.119 in(14)
- 0.122 in(8)
- 0.125 in(14)
- 0.126 in(14)
- 0.128 in(8)
- 0.131 in(4)
- 0.138 in(14)
- 0.143 in(8)
- 0.156 in(8)
- 0.157 in(14)
- 0.167 in(14)
- 0.169 in(8)
- 0.177 in(14)
- 0.178 in(8)
- 0.185 in(11)
- 0.188 in(14)
- 0.189 in(14)
- 0.192 in(4)
- 0.193 in(4)
- 0.195 in(8)
- 0.196 in(8)
- 0.197 in(10)
- 0.202 in(6)
- 0.213 in(6)
- 0.217 in(6)
- 0.218 in(2)
- 0.219 in(6)
- 0.237 in(10)
- 0.25 in(12)
- 0.256 in(6)
- 0.276 in(4)
- 0.281 in(6)
- 0.312 in(6)
- 0.315 in(2)
- 0.345 in(4)
- 0.354 in(4)
- 0.375 in(6)
- 0.381 in(4)
- 0.384 in(2)
bis
Schnittbreite
Schnittbreite
- 1.0 mm(8)
- 1.201 mm(8)
- 1.5 mm(8)
- 1.576 mm(8)
- 1.75 mm(8)
- 1.826 mm(8)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.2 mm(8)
- 2.225 mm(8)
- 2.25 mm(4)
- 2.375 mm(4)
- 2.401 mm(8)
- 2.475 mm(8)
- 2.5 mm(8)
- 2.676 mm(8)
- 2.75 mm(8)
- 2.801 mm(8)
- 3.0 mm(14)
- 3.1 mm(8)
- 3.176 mm(14)
- 3.2 mm(14)
- 3.25 mm(8)
- 3.325 mm(4)
- 3.5 mm(14)
- 3.6 mm(8)
- 3.95 mm(8)
- 3.975 mm(4)
- 4.0 mm(14)
- 4.25 mm(14)
- 4.3 mm(8)
- 4.5 mm(14)
- 4.525 mm(8)
- 4.7 mm(11)
- 4.775 mm(14)
- 4.801 mm(14)
- 4.875 mm(4)
- 4.9 mm(4)
- 4.95 mm(8)
- 4.976 mm(8)
- 5.0 mm(10)
- 5.125 mm(6)
- 5.4 mm(6)
- 5.5 mm(6)
- 5.525 mm(2)
- 5.575 mm(6)
- 6.0 mm(10)
- 6.351 mm(12)
- 6.5 mm(6)
- 7.0 mm(4)
- 7.125 mm(6)
- 7.926 mm(6)
- 8.0 mm(2)
- 8.75 mm(4)
- 9.0 mm(4)
- 9.525 mm(6)
- 9.675 mm(4)
- 9.75 mm(2)
bis
Stirnseitentyp
Stirnseitentyp
- BTF - BTF (1)
- FDA - Milling Cutter Arbor (69)
- FLK - Flange Adapter Kenna (1)
- HTS - Deep Hole Index Drill (2)
- KMS - KM TBD System (2)
- KMT - KM Adapter (27)
- MCS - Modular Cartridge System (12)
- PMK - Prismatic Adapter Kenna (6)
- SPK-Holding Arbor-Spindle Head (6)
- SZK - Collet Taper (16)
- VKT - Square Shank (17)
- ZYL - Cylindrical Adapter (254)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (44)
- D-DIAMOND/RHOMBIC 55 (30)
- LT-TRIANGLE LAY DOWN THREAD 60 (12)
- R-ROUND (13)
- S-SQUARE 90 (14)
- T-TRIANGLE 60 (16)
- TN-TOP NOTCH (20)
- V-DIAMOND/RHOMBIC 35 (16)
- W-TRIGON 80 (10)
Stirnseitenausführung
Stirnseitenausführung
- BTF01 Standard BTF (1)
- FDA03 Longit &Transver Drive (5)
- FDA22 Transv Drive & SHCS (64)
- FLK32FlngMt 3&6Bolt 67&97DBC (1)
- HTS01 Standard HTS Shank (2)
- KMS-02 Englarged Flange OnCntr (2)
- KMT00 All KM, except 02,05,09 (23)
- KMT09 KM4X 4 ball connection (4)
- MCS01 Modular Deep Grooving (12)
- PMK02 Cutoff Sup Bld A1-A3 (6)
- SPK02 Bolt Circ Dia 101.6 mm (6)
- SZK02 Collets 8 Degree Taper (16)
- VKT01 Std Design (17)
- ZYL01 Straight Shank (168)
- ZYL03 Attachment Thread (19)
- ZYL10 Weldon Shank (44)
- ZYL13 2Deg-Whistle Notch (20)
- ZYL22 Boring Bar Shank (2)
- ZYL63 2Deg Surf w/Cyl.w/drive (1)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 3 (8)
- 4 (6)
- 5 (3)
- 6 (3)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.209 in(1)
- 0.21 in(5)
- 0.294 in(4)
- 0.416 in(2)
- 1.299 in(1)
- 1.581 in(1)
- 1.974 in(1)
- 2.368 in(1)
bis
Maximale Stechtiefe
Maximale Stechtiefe
- 5.301 mm(1)
- 5.325 mm(5)
- 7.476 mm(4)
- 10.55 mm(2)
- 33.0 mm(1)
- 40.151 mm(1)
- 50.151 mm(1)
- 60.151 mm(1)
bis
Messlänge
Messlänge
- 4 in(10)
- 6 in(8)
- 3 in(5)
- 2 in(2)
- 5 in(2)
- 13 in(1)
- 1.299 in(2)
- 1.379 in(2)
- 1.772 in(2)
- 1.782 in(2)
- 1.969 in(3)
- 2.071 in(3)
- 2.165 in(4)
- 2.244 in(2)
- 2.25 in(3)
- 2.283 in(2)
- 2.323 in(5)
- 2.362 in(9)
- 2.559 in(7)
- 2.571 in(2)
- 2.598 in(1)
- 2.648 in(1)
- 2.677 in(1)
- 2.697 in(2)
- 2.75 in(3)
- 2.757 in(1)
- 2.894 in(2)
- 2.953 in(3)
- 3.003 in(2)
- 3.15 in(25)
- 3.25 in(2)
- 3.307 in(5)
- 3.337 in(1)
- 3.346 in(12)
- 3.38 in(2)
- 3.426 in(2)
- 3.484 in(2)
- 3.5 in(3)
- 3.543 in(18)
- 3.583 in(1)
- 3.74 in(9)
- 3.75 in(7)
- 3.894 in(1)
- 3.938 in(31)
- 3.95 in(1)
- 4.134 in(5)
- 4.17 in(1)
- 4.25 in(4)
- 4.252 in(1)
- 4.258 in(1)
- 4.291 in(5)
- 4.331 in(5)
- 4.337 in(1)
- 4.5 in(1)
- 4.529 in(5)
- 4.604 in(1)
- 4.626 in(1)
- 4.724 in(31)
- 4.75 in(2)
- 4.882 in(2)
- 4.921 in(1)
- 4.968 in(1)
- 5.037 in(1)
- 5.118 in(1)
- 5.258 in(1)
- 5.276 in(4)
- 5.315 in(3)
- 5.337 in(1)
- 5.5 in(1)
- 5.604 in(1)
- 5.691 in(2)
- 5.75 in(1)
- 5.906 in(23)
- 5.968 in(1)
- 6.037 in(1)
- 6.258 in(1)
- 6.299 in(42)
- 6.337 in(1)
- 6.604 in(1)
- 6.694 in(7)
- 6.968 in(1)
- 7.037 in(1)
- 7.258 in(1)
- 7.337 in(1)
- 7.604 in(1)
- 7.875 in(15)
- 7.968 in(1)
- 8.037 in(1)
- 8.259 in(1)
- 8.605 in(1)
- 8.968 in(1)
- 9.037 in(1)
- 9.234 in(1)
- 10.236 in(1)
- 10.468 in(1)
- 10.5 in(1)
- 11.468 in(1)
- 12.233 in(1)
- 12.5 in(1)
- 12.598 in(1)
- 12.992 in(1)
- 14.233 in(1)
- 15.233 in(1)
- 20.233 in(1)
Messlänge
Messlänge
- 160 mm(42)
- 100 mm(31)
- 120 mm(31)
- 80 mm(25)
- 150 mm(23)
- 90 mm(18)
- 200 mm(15)
- 85 mm(12)
- 60 mm(9)
- 95 mm(9)
- 170 mm(7)
- 65 mm(7)
- 105 mm(5)
- 109 mm(5)
- 110 mm(5)
- 115 mm(5)
- 59 mm(5)
- 84 mm(5)
- 134 mm(4)
- 55 mm(4)
- 135 mm(3)
- 50 mm(3)
- 75 mm(3)
- 124 mm(2)
- 127 mm(2)
- 33 mm(2)
- 35 mm(2)
- 45 mm(2)
- 57 mm(2)
- 58 mm(2)
- 87 mm(2)
- 108 mm(1)
- 125 mm(1)
- 130 mm(1)
- 260 mm(1)
- 320 mm(1)
- 330 mm(1)
- 66 mm(1)
- 68 mm(1)
- 70 mm(1)
- 91 mm(1)
- 45.25 mm(2)
- 50.801 mm(2)
- 52.6 mm(3)
- 57.151 mm(3)
- 65.3 mm(2)
- 67.226 mm(1)
- 68.5 mm(2)
- 69.851 mm(3)
- 73.5 mm(2)
- 76.2 mm(5)
- 76.25 mm(2)
- 82.551 mm(2)
- 84.75 mm(1)
- 85.851 mm(2)
- 88.5 mm(2)
- 88.9 mm(3)
- 95.25 mm(7)
- 98.9 mm(1)
- 100.301 mm(1)
- 101.601 mm(10)
- 105.9 mm(1)
- 107.95 mm(4)
- 108.15 mm(1)
- 110.15 mm(1)
- 114.301 mm(1)
- 116.95 mm(1)
- 117.5 mm(1)
- 120.65 mm(2)
- 126.176 mm(1)
- 127.95 mm(1)
- 133.55 mm(1)
- 135.55 mm(1)
- 139.701 mm(1)
- 142.35 mm(1)
- 144.55 mm(2)
- 146.05 mm(1)
- 151.576 mm(1)
- 152.4 mm(8)
- 153.35 mm(1)
- 158.951 mm(1)
- 160.951 mm(1)
- 167.75 mm(1)
- 176.976 mm(1)
- 178.75 mm(1)
- 184.351 mm(1)
- 186.351 mm(1)
- 193.15 mm(1)
- 202.375 mm(1)
- 204.15 mm(1)
- 209.75 mm(1)
- 218.55 mm(1)
- 227.775 mm(1)
- 229.55 mm(1)
- 234.55 mm(1)
- 265.875 mm(1)
- 266.7 mm(1)
- 291.276 mm(1)
- 310.701 mm(1)
- 317.5 mm(1)
- 330.201 mm(1)
- 361.526 mm(1)
- 386.925 mm(1)
- 513.926 mm(1)
Größe der Stirnseite
Größe der Stirnseite
- 0.119 in(1)
- 0.157 in(1)
- 0.197 in(1)
- 0.237 in(15)
- 0.25 in(9)
- 0.313 in(5)
- 0.315 in(15)
- 0.375 in(9)
- 0.386 in(3)
- 0.394 in(15)
- 0.437 in(2)
- 0.473 in(15)
- 0.5 in(12)
- 0.512 in(4)
- 0.551 in(10)
- 0.562 in(1)
- 0.625 in(9)
- 0.63 in(17)
- 0.709 in(16)
- 0.75 in(23)
- 0.787 in(17)
- 0.828 in(4)
- 0.866 in(6)
- 0.875 in(4)
- 0.946 in(4)
- 0.984 in(13)
- 1.0 in(26)
- 1.063 in(7)
- 1.25 in(19)
- 1.26 in(22)
- 1.5 in(12)
- 1.575 in(15)
- 1.969 in(9)
- 2.0 in(4)
- 2.362 in(2)
- 2.48 in(7)
- 2.5 in(3)
- 3.15 in(3)
- 3.938 in(1)
bis
Größe der Stirnseite
Größe der Stirnseite
- 3.0 mm(1)
- 4.0 mm(1)
- 5.0 mm(1)
- 6.0 mm(15)
- 6.351 mm(9)
- 7.95 mm(5)
- 8.0 mm(15)
- 9.525 mm(9)
- 9.8 mm(3)
- 10.0 mm(15)
- 11.101 mm(2)
- 12.0 mm(15)
- 12.701 mm(12)
- 13.0 mm(4)
- 14.0 mm(10)
- 14.275 mm(1)
- 15.875 mm(9)
- 16.0 mm(17)
- 18.0 mm(16)
- 19.05 mm(23)
- 20.0 mm(17)
- 21.0 mm(4)
- 22.0 mm(6)
- 22.225 mm(4)
- 24.0 mm(4)
- 25.0 mm(13)
- 25.401 mm(26)
- 27.0 mm(7)
- 31.75 mm(19)
- 32.0 mm(22)
- 38.1 mm(12)
- 40.0 mm(15)
- 50.0 mm(9)
- 50.801 mm(4)
- 60.0 mm(2)
- 63.0 mm(7)
- 63.5 mm(3)
- 80.0 mm(3)
- 100.0 mm(1)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (115)
- B L (105)
- C A (98)
- C N (106)
- D P (95)
- H T (115)
- H W (171)
backEnd
Aufnahmeart
Aufnahmeart
- TAPER SHANK (94)
Systemgröße
Systemgröße
- BTF46 (33)
- KM4X100 (182)
- KM4X63 (288)
Hinterer Durchmesser
Hinterer Durchmesser
- 46.026 mm(31)
- 63.0 mm(340)
- 68.976 mm(1)
- 100.0 mm(215)
- 103.976 mm(1)
bis
Hinterer Durchmesser
Hinterer Durchmesser
- 1.812 in(31)
- 2.48 in(340)
- 2.716 in(1)
- 3.938 in(215)
- 4.094 in(1)
bis
No filters matching ""
