Product Similar To:
KenCut™ AQ • ALCB • Radiused • 2 Flutes • 1 x D • Internal Coolant • Plain Shank • Metric
KenCut™ AQ PCD End Mill for Roughing and Finishing of Aluminum
Material Number100163910
Features and benefits
- End mills with polycrystalline diamond (PCD) for high-speed aluminum machining, reducing maching time drastically.
- PCD end mills provide up to ten times higher productivity compared to solid carbide end mills.
- Minimum quantitiy lubrication ready (MQL Ready).
- Sharp cutting edges and low friction rake surfaces guarantee high quality surface finishes.
- Trochoidal Milling
- Slotting: Square End
- 100081104
- Face Milling
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
- Side Milling/Shoulder Milling: Roughing
Material | KD1410 | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||
A | B | Cutting Speed | D1 | |||||||||||
ap | ae | ap | Min | Max | mm | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
N | 1 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 3000 | Fz | 0,070 | 0,080 | 0,090 | 0,140 | 0,160 | 0,160 |
2 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 3000 | Fz | 0,070 | 0,080 | 0,090 | 0,140 | 0,160 | 0,160 | |
3 | 1 x D | 0,25 x D | 0,5 x D | 180 | – | 1400 | Fz | 0,060 | 0,070 | 0,080 | 0,120 | 0,140 | 0,140 | |
4 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 800 | Fz | 0,060 | 0,070 | 0,080 | 0,100 | 0,120 | 0,120 | |
5 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 1000 | Fz | 0,050 | 0,060 | 0,070 | 0,090 | 0,100 | 0,100 | |
6 | 1 x D | 0,25 x D | 0,5 x D | 150 | – | 800 | Fz | 0,040 | 0,050 | 0,060 | 0,060 | 0,080 | 0,080 | |
7 | 1 x D | 0,25 x D | 0,5 x D | 250 | – | 500 | Fz | 0,040 | 0,050 | 0,060 | 0,060 | 0,080 | 0,080 |
Material | KD1410 | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||
A | B | Cutting Speed | D1 | |||||||||||
ap | ae | ap | Min | Max | mm | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
N | 1 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 3000 | Fz | 0,070 | 0,080 | 0,090 | 0,140 | 0,160 | 0,160 |
2 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 3000 | Fz | 0,070 | 0,080 | 0,090 | 0,140 | 0,160 | 0,160 | |
3 | 1 x D | 0,25 x D | 0,5 x D | 180 | – | 1400 | Fz | 0,060 | 0,070 | 0,080 | 0,120 | 0,140 | 0,140 | |
4 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 800 | Fz | 0,060 | 0,070 | 0,080 | 0,100 | 0,120 | 0,120 | |
5 | 1 x D | 0,25 x D | 0,5 x D | 200 | – | 1000 | Fz | 0,050 | 0,060 | 0,070 | 0,090 | 0,100 | 0,100 | |
6 | 1 x D | 0,25 x D | 0,5 x D | 150 | – | 800 | Fz | 0,040 | 0,050 | 0,060 | 0,060 | 0,080 | 0,080 | |
7 | 1 x D | 0,25 x D | 0,5 x D | 250 | – | 500 | Fz | 0,040 | 0,050 | 0,060 | 0,060 | 0,080 | 0,080 |