Inserts KSSM™ 12
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (60)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(53)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(53)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(53)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(53)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(60)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(60)
- M Stainless Steel (53)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(53)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(53)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(53)
- K Cast Iron (46)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
- N Non-Ferrous Materials (7)
- N1Wrought Aluminum (7)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
- N3High-Silicon Aluminum Alloys Si >12.2%(7)
- S High-Temp Alloys (48)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(36)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(36)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(36)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(48)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (3)
- 4.0 (86)
to
Corner Radius
Corner Radius
- 0.016 in(4)
- 0.031 in(40)
- 0.047 in(14)
- 0.063 in(8)
- 0.078 in(7)
- 0.094 in(1)
- 0.095 in(3)
- 0.125 in(9)
- 0.249 in(2)
- 0.25 in(1)
to
Corner Radius
Corner Radius
- 0.4 mm(4)
- 0.8 mm(40)
- 1.201 mm(14)
- 1.6 mm(8)
- 1.975 mm(7)
- 2.375 mm(1)
- 2.401 mm(3)
- 3.176 mm(9)
- 6.325 mm(2)
- 6.351 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC410M (7)
- KC520M (9)
- KC522M (1)
- KC725M (22)
- KCK15 (11)
- KCK20B (9)
- KCPK30 (12)
- KCPM20 (4)
- KCPM40 (6)
- KCSM40 (7)
- KTPK20 (1)
Insert Geometry
Chip Breaker CBMD
Chip Breaker CBMD
- GB2 (61)
- LD (8)
- LD2 (13)
- LE (7)
Cutting Tool Material
Cutting Tool Material
- H T (1)
- H W (88)
Tolerance Class
Tolerance Class
- C (28)
- E (48)
- P (13)
No filters matching ""
