Welcome
Please confirm your preferences
Update Preferences

Product Suggestions

Product Family suggestions

Contact a Kennametal Expert

Customer Support

Find customer support centers around the globe.

Quick Order
Item(s) successfully added to cart
View Cart
Turn up your volume for less with our limited-time offers! Shop Now

Modular Blades

Select Filters
Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (117)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(117)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(117)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(117)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(117)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(117)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(117)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(117)
    • M Stainless Steel (117)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(117)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(117)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(117)
    • K Cast Iron (117)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(117)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(117)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(117)
    • N Non-Ferrous Materials (117)
      • N1
        Wrought Aluminum (117)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(117)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(61)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (117)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (117)
      • N6
        Carbon, Graphite Composites, CFRP (117)
      • N7
        MMC's (61)
    • S High-Temp Alloys (117)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(117)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(117)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(117)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(117)
    • H Hardened Materials (117)
      • H1
        Hardened Materials 44-48 HRC(117)
      • H2
        Hardened Materials 48-55 HRC(117)
      • H3
        Hardened Materials 56-60 HRC(74)
      • H4
        Hardened Materials >60 HRC(74)
    Select First Choice
    • IN (1)
    • US (1)
    Applications
    Applications
    • Face GroovingFace Grooving (111)
    • GroovingGrooving (6)
    • Multiple Direction CuttingMultiple Direction Cutting (117)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (117)
    • Lightly Interrupted Cut (117)
    • Smooth Cut (117)
    • Varying Depth of Cut (117)
    Over All Length [L]
    Over All Length [L]
    • 2.077 in(31)
    • 2.156 in(47)
    • 2.269 in(21)
    • 2.352 in(14)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 52.75 mm(31)
    • 54.75 mm(47)
    • 57.625 mm(21)
    • 59.75 mm(14)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.008 in(79)
    • 0.016 in(88)
    • 0.031 in(56)
    • 0.034 in(18)
    • 0.039 in(28)
    • 0.041 in(22)
    • 0.047 in(22)
    • 0.048 in(5)
    • 0.06 in(32)
    • 0.063 in(28)
    • 0.079 in(19)
    • 0.08 in(18)
    • 0.094 in(18)
    • 0.098 in(15)
    • 0.099 in(15)
    • 0.119 in(13)
    • 0.12 in(13)
    • 0.125 in(13)
    • 0.156 in(5)
    • 0.157 in(5)
    • 0.158 in(5)
    • 0.187 in(4)
    • 0.188 in(4)
    • 0.197 in(4)
    • 0.198 in(4)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(79)
    • 0.4 mm(88)
    • 0.8 mm(56)
    • 0.851 mm(18)
    • 1.0 mm(28)
    • 1.05 mm(22)
    • 1.201 mm(22)
    • 1.225 mm(5)
    • 1.5 mm(32)
    • 1.526 mm(28)
    • 1.6 mm(28)
    • 2.0 mm(19)
    • 2.025 mm(18)
    • 2.375 mm(18)
    • 2.5 mm(15)
    • 2.526 mm(15)
    • 3.0 mm(13)
    • 3.026 mm(13)
    • 3.176 mm(13)
    • 3.975 mm(5)
    • 4.0 mm(5)
    • 4.025 mm(5)
    • 4.75 mm(4)
    • 4.775 mm(4)
    • 5.0 mm(4)
    • 5.025 mm(4)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1025 (36)
    • K313 (106)
    • KB1630 (74)
    • KB5625 (74)
    • KBH20 (74)
    • KC5010 (106)
    • KC5025 (106)
    • KC9110 (106)
    • KC9125 (106)
    • KCK20 (83)
    • KCP10 (105)
    • KCP25 (106)
    • KCU10 (117)
    • KCU10B (117)
    • KCU25 (117)
    • KCU25B (117)
    • KD1405 (61)
    • KMS (43)
    • KT315 (97)
    • KU10 (105)
    • KU30T (74)
    • KY3500 (83)
    • KYS30 (33)
    • SP88F8 (13)
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 16.0 mm(2)
    • 20.0 mm(4)
    • 25.0 mm(5)
    • 36.0 mm(5)
    • 42.0 mm(5)
    • 48.0 mm(3)
    • 50.0 mm(3)
    • 52.0 mm(3)
    • 58.0 mm(4)
    • 60.0 mm(4)
    • 64.0 mm(4)
    • 68.0 mm(4)
    • 70.0 mm(4)
    • 80.0 mm(7)
    • 90.0 mm(6)
    • 92.0 mm(3)
    • 100.0 mm(4)
    • 120.0 mm(8)
    • 130.0 mm(4)
    • 132.0 mm(4)
    • 184.0 mm(3)
    • 200.0 mm(8)
    • 250.0 mm(6)
    • 290.0 mm(8)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.63 in(2)
    • 0.787 in(4)
    • 0.984 in(5)
    • 1.417 in(5)
    • 1.655 in(5)
    • 1.891 in(3)
    • 1.969 in(3)
    • 2.047 in(3)
    • 2.283 in(4)
    • 2.362 in(4)
    • 2.52 in(4)
    • 2.677 in(4)
    • 2.757 in(4)
    • 3.15 in(7)
    • 3.543 in(6)
    • 3.622 in(3)
    • 3.938 in(4)
    • 4.724 in(8)
    • 5.118 in(4)
    • 5.197 in(4)
    • 7.244 in(3)
    • 7.875 in(8)
    • 9.843 in(6)
    • 11.417 in(8)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.787 in(2)
    • 0.984 in(4)
    • 1.379 in(1)
    • 1.417 in(4)
    • 1.811 in(1)
    • 1.891 in(4)
    • 2.126 in(2)
    • 2.283 in(3)
    • 2.52 in(3)
    • 2.835 in(3)
    • 2.914 in(3)
    • 3.307 in(4)
    • 3.701 in(4)
    • 3.938 in(8)
    • 4.409 in(4)
    • 4.882 in(3)
    • 5.354 in(4)
    • 5.906 in(3)
    • 6.299 in(4)
    • 7.875 in(2)
    • 8.346 in(4)
    • 10.0 in(4)
    • 11.811 in(12)
    • 39.331 in(11)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 35.0 mm(1)
    • 36.0 mm(4)
    • 46.0 mm(1)
    • 48.0 mm(4)
    • 54.0 mm(2)
    • 58.0 mm(3)
    • 64.0 mm(3)
    • 72.0 mm(3)
    • 74.0 mm(3)
    • 84.0 mm(4)
    • 94.0 mm(4)
    • 100.0 mm(8)
    • 112.0 mm(4)
    • 124.0 mm(3)
    • 136.0 mm(4)
    • 150.0 mm(3)
    • 160.0 mm(4)
    • 200.0 mm(2)
    • 212.0 mm(4)
    • 254.0 mm(4)
    • 300.0 mm(12)
    • 999.0 mm(11)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Front-End
    Cutting Width
    Cutting Width
    • 0.079 in(28)
    • 0.084 in(28)
    • 0.094 in(1)
    • 0.095 in(1)
    • 0.097 in(1)
    • 0.098 in(1)
    • 0.104 in(1)
    • 0.119 in(32)
    • 0.12 in(28)
    • 0.122 in(28)
    • 0.123 in(32)
    • 0.125 in(28)
    • 0.13 in(28)
    • 0.157 in(19)
    • 0.161 in(18)
    • 0.162 in(19)
    • 0.187 in(18)
    • 0.193 in(18)
    • 0.197 in(15)
    • 0.199 in(15)
    • 0.201 in(15)
    • 0.202 in(15)
    • 0.237 in(13)
    • 0.239 in(13)
    • 0.241 in(13)
    • 0.25 in(13)
    • 0.256 in(13)
    • 0.312 in(5)
    • 0.313 in(5)
    • 0.315 in(5)
    • 0.317 in(5)
    • 0.319 in(5)
    • 0.32 in(5)
    • 0.375 in(4)
    • 0.382 in(4)
    • 0.394 in(4)
    • 0.396 in(4)
    • 0.399 in(4)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(28)
    • 2.125 mm(28)
    • 2.375 mm(1)
    • 2.401 mm(1)
    • 2.475 mm(1)
    • 2.5 mm(1)
    • 2.625 mm(1)
    • 3.0 mm(32)
    • 3.051 mm(28)
    • 3.1 mm(28)
    • 3.125 mm(32)
    • 3.176 mm(28)
    • 3.301 mm(28)
    • 4.0 mm(19)
    • 4.101 mm(18)
    • 4.125 mm(19)
    • 4.75 mm(18)
    • 4.9 mm(18)
    • 5.0 mm(15)
    • 5.051 mm(15)
    • 5.101 mm(15)
    • 5.125 mm(15)
    • 6.0 mm(13)
    • 6.051 mm(13)
    • 6.125 mm(13)
    • 6.351 mm(13)
    • 6.5 mm(13)
    • 7.926 mm(5)
    • 7.95 mm(5)
    • 8.0 mm(5)
    • 8.05 mm(5)
    • 8.1 mm(5)
    • 8.125 mm(5)
    • 9.525 mm(4)
    • 9.701 mm(4)
    • 10.0 mm(4)
    • 10.05 mm(4)
    • 10.125 mm(4)
    Cutting Width MintoCutting Width Max
    Cartridge Size
    Cartridge Size
    • 50 (95)
    • 65 (22)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.473 in(26)
    • 0.551 in(54)
    • 0.748 in(15)
    • 0.946 in(21)
    • 1.024 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 12.0 mm(26)
    • 14.0 mm(54)
    • 19.0 mm(15)
    • 24.0 mm(21)
    • 26.0 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (74)
    • B L (74)
    • C N (83)
    • D P (61)
    • H T (97)
    • H W (117)
    No filters matching ""
    A4M-A INBOARD SWEEP
    (44)

    A4M-A INBOARD SWEEP

    A4M-S-B OutBoard Sweep (Integral Small Diameter Face Grooving) Metric
    (67)

    A4M-S-B OutBoard Sweep (Integral Small Diameter Face Grooving) Metric

    A4M-M
    (6)

    A4M-M

    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Please enter a valid name
    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk