Bienvenue
Veuillez confirmer vos préférences
Mettre à jour les préférences

Suggestions de produit

Product Family suggestions

Kennametal à votre service

Support Clients

Trouver les coordonnées des supports clients dans le monde

Commande rapide
Article(s) ajoutées avec succès au panier
Voir le panier
Usinez plus pour moins cher avec nos promotions! Achetez maintenant

Kennametal à votre service

Support Clients

Trouver les coordonnées des supports clients dans le monde

Article(s) ajoutées avec succès au panier
Voir le panier
Exit Search Retour à la Solution

Édition de la Solution

Ajout de Solution

Nom de la Solution:{{SolutionName}}

    Produit similaire à:

    Retour | Modifier similaire à

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric

    Corps d'outils Drill Fix™ DFR™

    Numéro de matériel100003979

    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Open expanded view
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    DFR KM40TS Shank • KM50TS Shank • 3 x D • Metric
    Représentation Générique
    Contactez notre équipe commerciale pour découvrir toutes vos options tarifaires

    Features and benefits

    • Drill Fix DFR with rectangular-shaped inserts offer highest stability and feed rates at smaller sizes.
    • X-offset design to adjust diameter size on turning machines and optimize tolerances on machining centers.
    • Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
    • Drill shipped with insert screws and Torx wrench.
    • PerçagePerçage
    • Perçage : Entrée inclinéePerçage : Entrée inclinée
    • Perçage : Sortie inclinéePerçage : Sortie inclinée
    • Perçage : Trou excentréPerçage : Trou excentré
    • Perçage : ConvexePerçage : Convexe
    • Shank: KM-TS™ ISO 26622Shank: KM-TS™ ISO 26622
    • Arrosage interne : Radial : Perçage indexable Arrosage interne : Radial : Perçage indexable
    • Perçage : trou borgnePerçage : trou borgne
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    ATTENTION • Drill Fix DFR

    ATTENTION En perçage débouchant, une rondelle (ou débouchure) se forme au moment où l’outil débouche de la pièce. Lorsque le foret est fixe et que la pièce tourne, la rondelle risque d’être éjectée du mandrin sous l’effet de la force centrifuge. Prévoir une protection pour les personnes se trouvant à proximité.

    Dimensions • DFR Whistle Notch (WD) Shank

    DLS
    2045
    2545
    3258

    Dimensions • Queue DFR Weldon® • DIN 1835-1 Forme B

    DLS
    2050
    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/tr0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/tr0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/tr0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOMDKC7140150180210mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC714080110140mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    1SIMDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    1UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    1UIMDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    1IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    1IIMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    2SILDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    2UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    2UILDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    2IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2IILDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    3SILDKC7140260285320mm/r0,09–0,150,11–0,180,15–0,25
    3UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    3UILDKC7140180195220mm/r0,09–0,150,11–0,180,15–0,25
    3IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    3IILDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    4SILDKC7140220250300mm/r0,09–0,150,11–0,180,15–0,25
    4UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    4UILDKC7140150180220mm/r0,09–0,150,11–0,180,15–0,25
    4IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    4IILDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    5SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    5UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    5UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    5IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    5IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    6SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    6UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    6UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    6IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    P1SOMDKCU25310325360mm/tr0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/tr0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/tr0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/tr0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/tr0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/tr0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC7140100130160mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/tr0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    2SOMDKC7140150180210mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/tr0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    IOMDKC71406080100mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/tr0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC714080110140mm/tr0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/tr0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    M1SOMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1SIMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2SIMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    3SOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3SIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3UIMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3IOMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40300400500mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    2SOSTKD1425375550775mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40175250325mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    4SOSTKD1425400600800mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    5SOSTKD1425400600800mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOGDKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    IGDKCU40
    IOGDKMF200300400mm/tr0,07–0,090,10–0,140,12–0,16
    IGDKMF
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1SILDKCU40200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1UILDKC7140120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    1IILDKC714080100125mm/tr0,10–0,180,12–0,200,14–0,24
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    2IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/tr0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40300400500mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/tr0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    2SOSTKD1425375550775mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40175250325mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/tr0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/tr0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    4SOSTKD1425400600800mm/tr0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/tr0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40200300400mm/tr0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/tr0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOHPKCU40250350450mm/tr0,07–0,090,10–0,140,12–0,16
    IHPKCU40
    IOHPKMF200300400mm/tr0,07-0,090,10-0,140,12-0,16
    IHPKMF
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1UILDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    1IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2SISTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    2IILDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3SISTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    3IILDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    4IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6UOHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6UIHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6IOHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    6IIHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR02... 12,50 16,00mmDFR03... 16,50 20,00mmDFR04... 20,50 24,00mm
    S1SOGDKCU40607075mm/tr0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40405060mm/tr0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/tr0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOGDKCU40506070mm/tr0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40304050mm/tr0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/tr0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOGDKCU40708090mm/tr0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/tr0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/tr0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    4SOGDKCU40708090mm/tr0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/tr0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/tr0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxi Ø DFR02... 12,50-16,00 mmDFR03... 16,50-20,00 mmDFR04... 20,50-24,00 mm
    S1SOGDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1SILDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1UOGDKCU40405060mm/r0,04–0,060,05–0,080,06–0,10
    1UILDKC7140405060mm/r0,04–0,060,05–0,080,06–0,10
    1IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2SOGDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2SILDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2UOGDKCU40304050mm/r0,04–0,060,05–0,080,06–0,10
    2UILDKC7140304050mm/r0,04–0,060,05–0,080,06–0,10
    2IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    3SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    3UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    3IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    3IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    4UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    4IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10

    DFR™ • PCD • Métrique

    Métrique
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage m/min
    MiniValeur initialeMaxiØDFR04 20,50–24,00mm
    N1SOSTKD1425396720841mm/tr0,06–0,08
    ISTKD1425
    2SOSTKD1425369670782mm/tr0,12–0,18
    ISTKD1425
    3SOSTKD1425341619723mm/tr0,12–0,18
    ISTKD1425
    4SOSTKD1425475720841mm/tr0,12–0,18
    ISTKD1425
    5SOSTKD1425480720864mm/tr0,06–0,08
    ISTKD1425
    Pouces
    Groupe MatièresConditionLogementGéométrieNuanceVitesse de coupe vcPlage des avances (fz) par diamètre
    Plage SFM
    MiniValeur initialeMaxiØDFR04 .813"–1.00"
    N1SOSTKD1425130023622760IPR.002–.003
    ISTKD1425
    2SOSTKD1425120921972567IPR.005–.007
    ISTKD1425
    3SOSTKD1425111820322374IPR.005–.007
    ISTKD1425
    4SOSTKD1425156023622760IPR.005–.007
    ISTKD1425
    5SOSTKD1425157523622834IPR.002–.003
    ISTKD1425
    Métrique
    Vitesse de coupe vc
    Plage m/minPlage des avances (fz) par diamètre
    Groupe MatièresConditionLogementGéométrieNuanceMiniValeur initialeMaxiØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    1SISTKD1425396720841mm/r0,06–0,08
    2SOSTKD1425369670782mm/r0,12–0,18
    2SISTKD1425369670782mm/r0,12–0,18
    3SOSTKD1425341619723mm/r0,12–0,18
    3SISTKD1425341619723mm/r0,12–0,18
    4SOSTKD1425475720841mm/r0,12–0,18
    4SISTKD1425475720841mm/r0,12–0,18
    5SOSTKD1425480720864mm/r0,06–0,08
    5SISTKD1425480720864mm/r0,06–0,08
    Vous êtes sur le point d’ajouter à votre page mes solutions. Souhaitez-vous continuer ?
    Select the destination where you want to move à.
    Nouvelle Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Veuillez saisir un nom valide
    product-image
    Please adjust the following properties from

    catalogue ISO

    catalogue ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Vous devez être connecté pour voir les informations de votre tableau de bord
    Session expired due to inactivity, please login again
    Le(s) produit(s) () que vous essayez d’ajouter au panier est/sont indisponible(s), veuillez Contacter le service client.
    article(s) ajouté(s) avec succès au panier
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number catalogue ISO Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk