Perçage
Arrosage interne : Radial : Perçage indexable Downloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 1245749 |
| Ref. ISO Catalogue | 3.76045R028V |
| Ref. ANSI Catalogue | 3.76045R028V |
| [D1] Diamètre de foret M | 45 mm |
| [D1] Diamètre de foret M | 1.77 in |
| [D1MAX] Diamètre de foret maximum | 50 mm |
| [D1MAX] Diamètre de foret maximum | 1.97 in |
| [D5] Diamètre maximal du corps | 28 mm |
| [D5] Diamètre maximal du corps | 1.102 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 13 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .5118 in |
| [L] Longueur totale | 85 mm |
| [L] Longueur totale | 3.346 in |
| [L1] Insérer la longueur de l’étalon | 50 mm |
| [L1] Insérer la longueur de l’étalon | 1.968 in |
| MAR_PILOT_DRILL | B510S08 |
| Cartouche 2 | 3.77000R050V |
| MAR_NUM_CART_INTERIOR | 1 |
| Cartouche 1 | 3.77000R051V |
| MAR_CART_EXTERIOR | 1 |
| MAR_DFT_INSERTS | DFT0303 |
| MAR_NUM_DFT_MAX_INSERTS | 4 |
| MAR_KG | 0,3 |
| MAR_LBS | 0.66 |
PerçageArrosage interne : Radial : Perçage indexable Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Inch | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||
| Range | |||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | ||||||
| P | 1 | S | O | MD | KCU25 | 309 | 623 | 750 | IPR | .002–.004 | .003–.005 | .004–.006 | .005–.007 |
| I | MD | KCU40 | |||||||||||
| U | O | MD | KCU40 | 231 | 427 | 561 | IPR | .002–.004 | .003–.005 | .004–.006 | .005–.007 | ||
| I | MD | KC7140 | |||||||||||
| I | O | MD | KCU40 | 143 | 262 | 348 | IPR | .002–.004 | .003–.005 | .004–.006 | .005–.007 | ||
| I | MD | KC7140 | |||||||||||
| 2 | S | O | HP | KCU25 | 309 | 591 | 750 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | |
| I | HP | KCU40 | |||||||||||
| U | O | HP | KCU40 | 231 | 394 | 561 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KCU40 | 143 | 230 | 348 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | ||
| I | HP | KC7140 | |||||||||||
| 3 | S | O | HP | KCU25 | 229 | 459 | 555 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | |
| I | HP | KCU40 | |||||||||||
| U | O | HP | KCU40 | 163 | 328 | 396 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KCU40 | 98 | 197 | 238 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | ||
| I | HP | KC7140 | |||||||||||
| 4 | S | O | HP | KCU25 | 309 | 394 | 750 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | |
| I | HP | KCU40 | |||||||||||
| U | O | HP | KCU40 | 231 | 328 | 561 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KCU40 | 143 | 262 | 348 | IPR | .004–.006 | .005–.007 | .005–.007 | .005–.008 | ||
| I | HP | KC7140 | |||||||||||
| 5 | S | O | HP | KCU25 | 257 | 328 | 622 | IPR | .002–.003 | .002–.003 | .002–.004 | .003–.005 | |
| I | HP | KCU40 | |||||||||||
| U | O | HP | KCU40 | 154 | 197 | 373 | IPR | .002–.003 | .002–.003 | .002–.004 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KCU40 | 103 | 131 | 250 | IPR | .002–.003 | .002–.003 | .002–.004 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||
| 6 | S | O | HP | KCU25 | 244 | 312 | 591 | IPR | .002–.003 | .002–.003 | .002–.004 | .003–.005 | |
| I | HP | KCU40 | |||||||||||
| U | O | HP | KCU40 | 146 | 187 | 355 | IPR | .002–.003 | .002–.003 | .002–.004 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KCU40 | 98 | 125 | 238 | IPR | .002–.003 | .002–.003 | .002–.004 | .003–.005 | ||
| I | HP | KC7140 | |||||||||||
| Inch | |||||||||||||
| Cutting Speed | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | |
| P | 1 | S | O | MD | KCU25 | 309 | 623 | 750 | ipr | .002-.004 | .003-.005 | .004-.006 | .005-.007 |
| 1 | S | I | MD | KCU40 | 309 | 623 | 750 | ipr | .002-.004 | .003-.005 | .004-.006 | .005-.007 | |
| 1 | U | O | MD | KCU40 | 231 | 427 | 561 | ipr | .002-.004 | .003-.005 | .004-.006 | .005-.007 | |
| 1 | U | I | MD | KC7140 | 231 | 427 | 561 | ipr | .002-.004 | .003-.005 | .004-.006 | .005-.007 | |
| 1 | I | O | MD | KCU40 | 143 | 262 | 348 | ipr | .002-.004 | .003-.005 | .004-.006 | .005-.007 | |
| 1 | I | I | MD | KC7140 | 143 | 262 | 348 | ipr | .002-.004 | .003-.005 | .004-.006 | .005-.007 | |
| 2 | S | O | HP | KCU25 | 309 | 591 | 750 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 2 | S | I | HP | KCU40 | 309 | 591 | 750 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 2 | U | O | HP | KCU40 | 231 | 394 | 561 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 2 | U | I | HP | KC7140 | 231 | 394 | 561 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 2 | I | O | HP | KCU40 | 143 | 230 | 348 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 2 | I | I | HP | KC7140 | 143 | 230 | 348 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 3 | S | O | HP | KCU25 | 229 | 459 | 555 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 3 | S | I | HP | KCU40 | 229 | 459 | 555 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 3 | U | O | HP | KCU40 | 163 | 328 | 396 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 3 | U | I | HP | KC7140 | 163 | 328 | 396 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 3 | I | O | HP | KCU40 | 98 | 197 | 238 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 3 | I | I | HP | KC7140 | 98 | 197 | 238 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 4 | S | O | HP | KCU25 | 309 | 394 | 750 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 4 | S | I | HP | KCU40 | 309 | 394 | 750 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 4 | U | O | HP | KCU40 | 231 | 328 | 561 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 4 | U | I | HP | KC7140 | 231 | 328 | 561 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 4 | I | O | HP | KCU40 | 143 | 262 | 348 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 4 | I | I | HP | KC7140 | 143 | 262 | 348 | ipr | .004-.006 | .005-.007 | .005-.007 | .005-.008 | |
| 5 | S | O | HP | KCU25 | 257 | 328 | 622 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 5 | S | I | HP | KCU40 | 257 | 328 | 622 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 5 | U | O | HP | KCU40 | 154 | 197 | 373 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 5 | U | I | HP | KC7140 | 154 | 197 | 373 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 5 | I | O | HP | KCU40 | 103 | 131 | 250 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 5 | I | I | HP | KC7140 | 103 | 131 | 250 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 6 | S | O | HP | KCU25 | 244 | 312 | 591 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 6 | S | I | HP | KCU40 | 244 | 312 | 591 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 6 | U | O | HP | KCU40 | 146 | 187 | 355 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 6 | U | I | HP | KC7140 | 146 | 187 | 355 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 6 | I | O | HP | KCU40 | 98 | 125 | 238 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| 6 | I | I | HP | KC7140 | 98 | 125 | 238 | ipr | .002-.003 | .002-.003 | .002-.004 | .003-.005 | |
| Inch | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (fz) by Diameter | |||||||
| Range | |||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | ||||||
| M | 1 | S | O | MD | KCU25 | 159 | 361 | 439 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 |
| I | MD | KCU40 | |||||||||||
| U | O | MD | KCU40 | 101 | 230 | 281 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | ||
| I | MD | KC7140 | |||||||||||
| I | O | MD | KC7140 | 72 | 164 | 199 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | ||
| I | MD | KC7140 | |||||||||||
| 2 | S | O | MD | KCU25 | 159 | 325 | 439 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| I | MD | KCU40 | |||||||||||
| U | O | MD | KCU40 | 101 | 207 | 281 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | ||
| I | MD | KC7140 | |||||||||||
| I | O | MD | KC7140 | 72 | 148 | 199 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | ||
| I | MD | KC7140 | |||||||||||
| 3 | S | O | MD | KCU25 | 159 | 289 | 439 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| I | MD | KCU40 | |||||||||||
| U | O | MD | KCU40 | 101 | 184 | 281 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | ||
| I | MD | KC7140 | |||||||||||
| I | O | MD | KC7140 | 72 | 131 | 199 | IPR | .003–.004 | .005–.007 | .006–.008 | .006–.009 | ||
| I | MD | KC7140 | |||||||||||
| Inch | |||||||||||||
| Cutting Speed | Recommended Feed Rate (fz) by Diameter | ||||||||||||
| Range | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | |
| M | 1 | S | O | MD | KCU25 | 159 | 361 | 439 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 |
| 1 | S | I | MD | KCU40 | 159 | 361 | 439 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 1 | U | O | MD | KCU40 | 101 | 230 | 281 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 1 | U | I | MD | KC7140 | 101 | 230 | 281 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 1 | I | O | MD | KC7140 | 72 | 164 | 199 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 1 | I | I | MD | KC7140 | 72 | 164 | 199 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 2 | S | O | MD | KCU25 | 159 | 325 | 439 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 2 | S | I | MD | KCU40 | 159 | 325 | 439 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 2 | U | O | MD | KCU40 | 101 | 207 | 281 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 2 | U | I | MD | KC7140 | 101 | 207 | 281 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 2 | I | O | MD | KC7140 | 72 | 148 | 199 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 2 | I | I | MD | KC7140 | 72 | 148 | 199 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | S | O | MD | KCU25 | 159 | 289 | 439 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | S | I | MD | KCU40 | 159 | 289 | 439 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | U | O | MD | KCU40 | 101 | 184 | 281 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | U | I | MD | KC7140 | 101 | 184 | 281 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | I | O | MD | KC7140 | 72 | 131 | 199 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | I | I | MD | KC7140 | 72 | 131 | 199 | ipr | .003–.004 | .005–.007 | .006–.008 | .006–.009 | |
| Inch | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||
| Range | |||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | ||||||
| K | 1 | S | O | HP | KCPK10 | 309 | 561 | 750 | IPR | .004–.008 | .005–.011 | .006–.012 | .007–.013 |
| I | HP | KCPK10 | |||||||||||
| U | O | HP | KCU25 | 211 | 384 | 510 | IPR | .004–.008 | .005–.011 | .006–.012 | .007–.013 | ||
| I | HP | KCU25 | |||||||||||
| I | O | HP | KCU40 | 131 | 236 | 316 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | ||
| I | HP | KCU40 | |||||||||||
| 2 | S | O | HP | KCPK10 | 309 | 533 | 750 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| I | HP | KCPK10 | |||||||||||
| U | O | HP | KCU25 | 211 | 365 | 510 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | ||
| I | HP | KCU25 | |||||||||||
| I | O | HP | KCU40 | 131 | 224 | 316 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | ||
| I | HP | KCU40 | |||||||||||
| 3 | S | O | HP | KCPK10 | 294 | 480 | 712 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| I | HP | KCPK10 | |||||||||||
| U | O | HP | KCU25 | 195 | 328 | 473 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | ||
| I | HP | KCU25 | |||||||||||
| I | O | HP | KCU40 | 113 | 202 | 274 | IPR | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | ||
| I | HP | KCU40 | |||||||||||
| Inch | |||||||||||||
| Cutting Speed | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | |
| K | 1 | S | O | HP | KCPK10 | 309 | 561 | 750 | ipr | .004–.008 | .005–.011 | .006–.012 | .007–.013 |
| 1 | S | I | HP | KCPK10 | 309 | 561 | 750 | ipr | .004–.008 | .005–.011 | .006–.012 | .007–.013 | |
| 1 | U | O | HP | KCU25 | 211 | 384 | 510 | ipr | .004–.008 | .005–.011 | .006–.012 | .007–.013 | |
| 1 | U | I | HP | KCU25 | 211 | 384 | 510 | ipr | .004–.008 | .005–.011 | .006–.012 | .007–.013 | |
| 1 | I | O | HP | KCU40 | 131 | 236 | 316 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 1 | I | I | HP | KCU40 | 131 | 236 | 316 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 2 | S | O | HP | KCPK10 | 309 | 533 | 750 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 2 | S | I | HP | KCPK10 | 309 | 533 | 750 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 2 | U | O | HP | KCU25 | 211 | 365 | 510 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 2 | U | I | HP | KCU25 | 211 | 365 | 510 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 2 | I | O | HP | KCU40 | 131 | 224 | 316 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 2 | I | I | HP | KCU40 | 131 | 224 | 316 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 3 | S | O | HP | KCPK10 | 294 | 480 | 712 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 3 | S | I | HP | KCPK10 | 294 | 480 | 712 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 3 | U | O | HP | KCU25 | 195 | 328 | 473 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 3 | U | I | HP | KCU25 | 195 | 328 | 473 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 3 | I | O | HP | KCU40 | 113 | 202 | 274 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| 3 | I | I | HP | KCU40 | 113 | 202 | 274 | ipr | .004–.008 | .005–.011 | .006–.012 | .007 –.013 | |
| Inch | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||
| Range | |||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | ||||||
| N | 1 | S | O | ST | KD1425 | 504 | 787 | 1176 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 |
| I | ST | KD1425 | |||||||||||
| U | O | HP | KC7140 | 336 | 525 | 784 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KC7140 | 218 | 341 | 510 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KC7140 | |||||||||||
| 2 | S | O | ST | KD1425 | 504 | 732 | 1176 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| I | ST | KD1425 | |||||||||||
| U | O | HP | KCU40 | 336 | 488 | 784 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KCU40 | |||||||||||
| I | O | HP | KCU40 | 218 | 317 | 510 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KCU40 | |||||||||||
| 3 | S | O | ST | KD1425 | 504 | 677 | 1176 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| I | ST | KD1425 | |||||||||||
| U | O | HP | KCU40 | 336 | 451 | 784 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KCU40 | |||||||||||
| I | O | HP | KCU40 | 218 | 293 | 510 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KCU40 | |||||||||||
| 4 | S | O | ST | KD1425 | 504 | 732 | 1176 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| I | ST | KD1425 | |||||||||||
| U | O | LD | KC7140 | 336 | 488 | 784 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | LD | KC7140 | |||||||||||
| I | O | LD | KC7140 | 218 | 317 | 510 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | LD | KC7140 | |||||||||||
| 5 | S | O | ST | KD1425 | 368 | 722 | 858 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| I | ST | KD1425 | |||||||||||
| U | O | HP | KC7140 | 235 | 459 | 549 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KC7140 | 151 | 295 | 351 | IPR | .002–.004 | .004–.007 | .005–.008 | .006–.010 | ||
| I | HP | KC7140 | |||||||||||
| Inch | |||||||||||||
| Cutting Speed | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 1.77–2.17 | DFT05... 2.17–3.07 | DFT06... 3.07–5.51 | DFT07... 5.51–10.63 | |
| N | 1 | S | O | ST | KD1425 | 504 | 787 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 |
| 1 | S | I | ST | KD1425 | 504 | 787 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 1 | U | O | HP | KC7140 | 336 | 525 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 1 | U | I | HP | KC7140 | 336 | 525 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 1 | I | O | HP | KC7140 | 218 | 341 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 1 | I | I | HP | KC7140 | 218 | 341 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 2 | S | O | ST | KD1425 | 504 | 732 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 2 | S | I | ST | KD1425 | 504 | 732 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 2 | U | O | HP | KCU40 | 336 | 488 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 2 | U | I | HP | KCU40 | 336 | 488 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 2 | I | O | HP | KCU40 | 218 | 317 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 2 | I | I | HP | KCU40 | 218 | 317 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 3 | S | O | ST | KD1425 | 504 | 677 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 3 | S | I | ST | KD1425 | 504 | 677 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 3 | U | O | HP | KCU40 | 336 | 451 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 3 | U | I | HP | KCU40 | 336 | 451 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 3 | I | O | HP | KCU40 | 218 | 293 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 3 | I | I | HP | KCU40 | 218 | 293 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 4 | S | O | ST | KD1425 | 504 | 732 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 4 | S | I | ST | KD1425 | 504 | 732 | 1176 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 4 | U | O | LD | KC7140 | 336 | 488 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 4 | U | I | LD | KC7140 | 336 | 488 | 784 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 4 | I | O | LD | KC7140 | 218 | 317 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 4 | I | I | LD | KC7140 | 218 | 317 | 510 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 5 | S | O | ST | KD1425 | 368 | 722 | 858 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 5 | S | I | ST | KD1425 | 368 | 722 | 858 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 5 | U | O | HP | KC7140 | 235 | 459 | 549 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 5 | U | I | HP | KC7140 | 235 | 459 | 549 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 5 | I | O | HP | KC7140 | 151 | 295 | 351 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| 5 | I | I | HP | KC7140 | 151 | 295 | 351 | ipr | .002–.004 | .004–.007 | .005–.008 | .006–.010 | |
| Inch | |||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||
| Range | |||||||||||||
| Min | Starting Value | Max | Ø | DFT03... 1.77-2.17 | DFT05... 2.17-3.07 | DFT06... 3.07-5.51 | DFT07... 5.51-10.63 | ||||||
| S | 1 | S | O | HP | KC7140 | 80 | 131 | 160 | IPR | .002–.003 | .002–.003 | .003–.004 | .003–.004 |
| I | HP | KC7140 | |||||||||||
| U | O | HP | KC7140 | 60 | 98 | 120 | IPR | .002–.003 | .002–.003 | .003–.004 | .003–.004 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KC7140 | 50 | 82 | 100 | IPR | .002–.003 | .002–.003 | .003–.004 | .003–.004 | ||
| I | HP | KC7140 | |||||||||||
| 2 | S | O | HP | KC7140 | 82 | 115 | 158 | IPR | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| I | HP | KC7140 | |||||||||||
| U | O | HP | KC7140 | 58 | 82 | 112 | IPR | .002–.003 | .002–.003 | .003–.004 | .003–.004 | ||
| I | HP | KC7140 | |||||||||||
| I | O | HP | KC7140 | 46 | 66 | 90 | IPR | .002–.003 | .002–.003 | .003–.004 | .003–.004 | ||
| I | HP | KC7140 | |||||||||||
| Inch | |||||||||||||
| Cutting Speed | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03... 1.77-2.17 | DFT05... 2.17-3.07 | DFT06... 3.07-5.51 | DFT07... 5.51-10.63 | |
| S | 1 | S | O | HP | KC7140 | 80 | 131 | 160 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 |
| 1 | S | I | HP | KC7140 | 80 | 131 | 160 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 1 | U | O | HP | KC7140 | 60 | 98 | 120 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 1 | U | I | HP | KC7140 | 60 | 98 | 120 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 1 | I | O | HP | KC7140 | 50 | 82 | 100 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 1 | I | I | HP | KC7140 | 50 | 82 | 100 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 2 | S | O | HP | KC7140 | 82 | 115 | 158 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 2 | S | I | HP | KC7140 | 82 | 115 | 158 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 2 | U | O | HP | KC7140 | 58 | 82 | 112 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 2 | U | I | HP | KC7140 | 58 | 82 | 112 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 2 | I | O | HP | KC7140 | 46 | 66 | 90 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
| 2 | I | I | HP | KC7140 | 46 | 66 | 90 | ipr | .002–.003 | .002–.003 | .003–.004 | .003–.004 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?