Fraisage hélicoïdal
Ramping : Ébauche
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Queue — Cylindrique Weldon
Queue — à vis
Usinage de pochesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 1888412 |
| Ref. ISO Catalogue | 25E05R035M12SRD07 |
| Ref. ANSI Catalogue | 25E05R035M12SRD07 |
| [D1MAX] Diamètre de coupe maximal | 25 mm |
| [D1MAX] Diamètre de coupe maximal | .9843 in |
| [D1] Diamètre effectif de coupe | 18 mm |
| [D1] Diamètre effectif de coupe | .7087 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 21 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .8268 in |
| [D2] Diamètre maximal du corps | 21 mm |
| [D2] Diamètre maximal du corps | .8268 in |
| [DPM] Diamètre du pilote du côté machine | 12.5 mm |
| [DPM] Diamètre du pilote du côté machine | .4921 in |
| [G3X] Taille du filetage de connexion externe | M12 |
| [L2] Longueur de tête | 35 mm |
| [L2] Longueur de tête | 1.378 in |
| [AP1MAX] 1re profondeur de coupe maximale | 3.5 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .1378 in |
| Nombre de plaquettes | 5 |
| Angle de ramping maximum | 3.5 |
| Poids Livres | 0.24 |
| Plaquette étalon | RD__0702__ |
Fraisage hélicoïdalRamping : ÉbaucheFraisage de côté/avec épaulement : Bout hémisphériqueProfilage 3DQueue — Cylindrique WeldonQueue — à visUsinage de pochesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Material Group | Light | General | Heavy | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear |  | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .F..LP | KC522M | .F..LP | KC725M | .S..LN | KC725M |
| P3–P4 | .S..LN | KCPM20 | .S..LN | KC522M | .S..LN | KC725M |
| P5–P6 | .S..LN | KC510M | .S..LN | KCPM20 | .S..LN | KCPM20 |
| M1–M2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
| M3 | .F..LP | KC725M | – | – | – | – |
| K1–K2 | .F..LP | KC510M | .S..LN | KC510M | .S..LN | KC510M |
| K3 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KC510M |
| N1–N2 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| N3 | .F..LP | KC510M | .F..LP | KC510M | .F..LP | KC510M |
| S1–S2 | .F..LP | KC522M | .F..LP | KC725M | – | – |
| S3 | .F..LP | KC725M | – | – | – | – |
| S4 | .F..LP | KC725M | – | – | – | – |
| H1 | .S..LN | KC510M | .S..LN | KC510M | .S..LN | KCPM20 |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,08 | 0,13 | 0,33 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,22 | 0,05 | 0,08 | 0,20 | 0,05 | 0,08 | 0,20 | .F..LP |
| .S..LN | 0,14 | 0,41 | 0,68 | 0,11 | 0,31 | 0,51 | 0,09 | 0,27 | 0,44 | 0,09 | 0,25 | 0,41 | 0,09 | 0,24 | 0,41 | .S..LN |
| .T..LN | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,26 | 0,41 | 0,10 | 0,25 | 0,41 | .T..LN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,10 | 0,15 | 0,39 | 0,07 | 0,12 | 0,29 | 0,06 | 0,10 | 0,25 | 0,06 | 0,09 | 0,24 | 0,06 | 0,09 | 0,23 | .F..LP |
| .S..LN | 0,17 | 0,47 | 0,79 | 0,12 | 0,35 | 0,59 | 0,11 | 0,31 | 0,51 | 0,10 | 0,29 | 0,48 | 0,10 | 0,28 | 0,47 | .S..LN |
| .T..LN | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,30 | 0,48 | 0,12 | 0,29 | 0,47 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,16 | 0,26 | 0,65 | 0,12 | 0,19 | 0,49 | 0,11 | 0,17 | 0,42 | 0,10 | 0,16 | 0,40 | 0,10 | 0,16 | 0,39 | .F..LP |
| .S..LN | 0,28 | 0,80 | 1,33 | 0,21 | 0,59 | 0,99 | 0,18 | 0,52 | 0,86 | 0,17 | 0,48 | 0,81 | 0,17 | 0,47 | 0,79 | .S..LN |
| .T..LN | 0,33 | 0,83 | 1,33 | 0,25 | 0,62 | 0,99 | 0,22 | 0,54 | 0,86 | 0,20 | 0,50 | 0,81 | 0,20 | 0,49 | 0,79 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | 0,12 | 0,19 | 0,48 | 0,09 | 0,14 | 0,36 | 0,08 | 0,12 | 0,31 | 0,07 | 0,12 | 0,29 | 0,07 | 0,11 | 0,29 | .F..LP |
| .S..LN | 0,21 | 0,58 | 0,98 | 0,15 | 0,44 | 0,73 | 0,13 | 0,38 | 0,63 | 0,13 | 0,36 | 0,59 | 0,12 | 0,35 | 0,58 | .S..LN |
| .T..LN | 0,24 | 0,61 | 0,98 | 0,18 | 0,45 | 0,73 | 0,16 | 0,40 | 0,63 | 0,15 | 0,37 | 0,59 | 0,15 | 0,36 | 0,58 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .003 | .005 | .014 | .003 | .004 | .010 | .002 | .003 | .009 | .002 | .003 | .008 | .002 | .003 | .008 | .F..LP |
| .S..LN | .006 | .016 | .028 | .004 | .012 | .020 | .004 | .010 | .018 | .003 | .010 | .016 | .003 | .010 | .016 | .S..LN |
| .T..LN | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .T..LN |
| Light | General | Heavy |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .007 | .011 | .028 | .005 | .008 | .021 | .005 | .007 | .018 | .004 | .007 | .017 | .004 | .007 | .017 | .F..LP |
| .S..LN | .012 | .034 | .059 | .009 | .025 | .042 | .008 | .022 | .036 | .007 | .020 | .034 | .007 | .020 | .033 | .S..LN |
| .T..LN | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .004 | .006 | .016 | .003 | .005 | .012 | .003 | .004 | .010 | .002 | .004 | .009 | .002 | .004 | .009 | .F..LP |
| .S..LN | .007 | .019 | .032 | .005 | .014 | .023 | .004 | .012 | .020 | .004 | .011 | .019 | .004 | .011 | .018 | .S..LN |
| .T..LN | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .T..LN |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .F..LP | .005 | .008 | .021 | .004 | .006 | .015 | .003 | .005 | .013 | .003 | .005 | .012 | .003 | .005 | .012 | .F..LP |
| .S..LN | .009 | .025 | .042 | .006 | .018 | .031 | .006 | .016 | .027 | .005 | .015 | .025 | .005 | .015 | .024 | .S..LN |
| .T..LN | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .T..LN |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 440 | 360 | 310 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 270 | 225 | 190 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 245 | 205 | 170 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 185 | 160 | 130 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 255 | 205 | 175 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 150 | 125 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 285 | 235 | 200 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 260 | 220 | 185 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 195 | 160 | – | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | 275 | 235 | 195 |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | 220 | 180 | 160 | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | 185 | 150 | 130 | |
| N | 1–2 | 770 | 685 | 630 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 695 | 640 | 585 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | – | – | – | |
| H | 1 | 190 | 155 | 110 | 145 | 110 | 85 | – | – | – | 170 | 140 | 115 | – | – | – |
| Material Group | KC510M | KC522M | KC725M | KCPM20 | KTPK20 | |||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1440 | 1180 | 1010 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 890 | 740 | 620 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 800 | 670 | 560 | |
| 4 | 960 | 780 | 660 | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 600 | 520 | 430 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 830 | 680 | 580 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 500 | 410 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 940 | 770 | 650 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 850 | 720 | 600 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 640 | 530 | – | |
| K | 1 | 1150 | 1040 | 940 | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | 910 | 770 | 640 |
| 2 | 910 | 820 | 760 | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | 720 | 590 | 520 | |
| 3 | 770 | 680 | 620 | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | 600 | 500 | 420 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | – | – | – | |
| H | 1 | 630 | 510 | 360 | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?