Perçage
Perçage : Entrée inclinée
Perçage : Sortie inclinée
Perçage : Fond plat
Perçage : Convexe
Dimensions de l'outil : 2 goujures/4 listels/lubrifiant
DIN 6535
DIN 6537
Perçage — Arrosage interne
Arrosage interne : MQL (Quantité minimale de lubrification) : Perçage
Queue — Cylindrique Classique ≤h6
Angle d'hélice : 30°
Style de bec : Chanfrein de bec
Style de bec : Bout plat
Profondeur de perçage : 3x 
Lamage
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 3885856 |
| Ref. ISO Catalogue | B707A13500FBL |
| Ref. ANSI Catalogue | B707A13500FBL |
| Nuance | KCMS15 |
| [D1] Diamètre de foret M | 13.5 mm |
| [D1] Diamètre de foret M | .5315 in |
| [L] Longueur totale | 107 mm |
| [L] Longueur totale | 4.212 in |
| [L3] Longueur de goujures | 60 mm |
| [L3] Longueur de goujures | 2.362 in |
| [L4] Profondeur de perçage maximale | 43 mm |
| [L4] Profondeur de perçage maximale | 1.692 in |
| [L5] Longueur de pointe du foret | 0.44 mm |
| [L5] Longueur de pointe du foret | .0173 in |
| [LS] Longueur de la queue | 45 mm |
| [LS] Longueur de la queue | 1.771 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 14 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .5512 in |
PerçagePerçage : Entrée inclinéePerçage : Sortie inclinéePerçage : Fond platPerçage : ConvexeDimensions de l'outil : 2 goujures/4 listels/lubrifiantDIN 6535DIN 6537Perçage — Arrosage interneArrosage interne : MQL (Quantité minimale de lubrification) : PerçageQueue — Cylindrique Classique ≤h6Angle d'hélice : 30°Style de bec : Chanfrein de becStyle de bec : Bout platProfondeur de perçage : 3x LamageDrilling: Cross-Hole DrillingCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Tolerans • İnç | ||
| Anma ölçüsü aralığı | D1 Tolerans m7 | D Tolerans h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
| Tolerans • Metrik | ||
| Anma ölçüsü aralığı | D1 Tolerans m7 | D Tolerans h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Kısa | Uzun | Ekstra uzun | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Malzeme grubu |  |  | |||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 5 | 45 | 50 | 60 | mm/dev | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 6 | 40 | 50 | 60 | mm/dev | 0,03–0,06 | 0,04–0,07 | 0,04–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 40 | 50 | 60 | mm/dev | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 2 | 40 | 50 | 80 | mm/dev | 0,06–0,11 | 0,07–0,11 | 0,08–0,16 | 0,12–0,20 | 0,13–0,21 | 0,16–0,22 | 0,18–0,24 | 0,21–0,26 | |
| 3 | 40 | 55 | 70 | mm/dev | 0,03–0,04 | 0,03–0,05 | 0,04–0,06 | 0,04–0,07 | 0,05–0,08 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | |
| S | 1 | 20 | 25 | 30 | mm/dev | 0,06–0,08 | 0,06–0,08 | 0,07–0,10 | 0,10–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,19 | 0,17–0,22 |
| 2 | 10 | 20 | 30 | mm/dev | 0,05–0,07 | 0,05–0,07 | 0,06–0,08 | 0,08–0,11 | 0,09–0,12 | 0,10–0,13 | 0,12–0,16 | 0,14–0,18 | |
| 3 | 30 | 35 | 50 | mm/dev | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| 4 | 30 | 35 | 50 | mm/dev | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| Malzeme grubu | | | |||||||||||
| Malzeme grubu | Kesme hızı | İnç | |||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Min. | Başlangıç değeri | Maks. | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 5 | 150 | 160 | 200 | IPR | .002–.003 | .002–.004 | .002–.005 | .004–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.009 |
| 6 | 130 | 160 | 200 | IPR | .001–.002 | .002–.003 | .002–.004 | .003–.005 | .004–.006 | .004–.006 | .005–.007 | .006–.008 | |
| M | 1 | 130 | 160 | 200 | IPR | .002–.003 | .002–.004 | .002–.005 | .004–.006 | .004–.006 | .005–.008 | .006–.009 | .006–.009 |
| 2 | 130 | 160 | 260 | IPR | .002–.004 | .003–.004 | .003–.006 | .005–.008 | .005–.008 | .006–.009 | .007–.009 | .008–.010 | |
| 3 | 130 | 180 | 230 | IPR | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.004 | .003–.004 | .003–.005 | |
| S | 1 | 70 | 80 | 100 | IPR | .002–.003 | .002–.003 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.008 | .007–.009 |
| 2 | 30 | 70 | 100 | IPR | .002–.003 | .002–.003 | .002–.003 | .003–.004 | .004–.005 | .004–.005 | .005–.006 | .006–.007 | |
| 3 | 100 | 110 | 160 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .002–.004 | .002–.004 | .003–.004 | .003–.005 | |
| 4 | 100 | 110 | 160 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .002–.004 | .002–.004 | .003–.004 | .003–.005 | |
| | ||||||||||||
| Kesme hızı | Metrik | ||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 5 | 45 | 50 | 60 | mm/dev | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 6 | 40 | 50 | 60 | mm/dev | 0,03–0,06 | 0,04–0,07 | 0,04–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | |
| M | 1 | 40 | 50 | 60 | mm/dev | 0,04–0,08 | 0,05–0,09 | 0,06–0,12 | 0,09–0,15 | 0,10–0,16 | 0,12–0,20 | 0,14–0,23 | 0,16–0,24 |
| 2 | 40 | 50 | 80 | mm/dev | 0,06–0,11 | 0,07–0,11 | 0,08–0,16 | 0,12–0,20 | 0,13–0,21 | 0,16–0,22 | 0,18–0,24 | 0,21–0,26 | |
| 3 | 40 | 55 | 70 | mm/dev | 0,03–0,04 | 0,03–0,05 | 0,04–0,06 | 0,04–0,07 | 0,05–0,08 | 0,06–0,10 | 0,07–0,11 | 0,08–0,12 | |
| S | 1 | 20 | 25 | 30 | mm/dev | 0,06–0,08 | 0,06–0,08 | 0,07–0,10 | 0,10–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,19 | 0,17–0,22 |
| 2 | 10 | 20 | 30 | mm/dev | 0,05–0,07 | 0,05–0,07 | 0,06–0,08 | 0,08–0,11 | 0,09–0,12 | 0,10–0,13 | 0,12–0,16 | 0,14–0,18 | |
| 3 | 30 | 35 | 50 | mm/dev | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
| 4 | 30 | 35 | 50 | mm/dev | 0,03–0,05 | 0,03–0,05 | 0,04–0,08 | 0,05–0,10 | 0,05–0,10 | 0,05–0,10 | 0,07–0,11 | 0,08–0,12 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?