Spiral Circular
Slotting: Shoulder
Surfaçage
Fraisage hélicoïdal
Ramping : Ébauche
Usinage de poches
Lamage
Fraisage en plongée : Bout hémisphérique
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5661030 |
| Ref. ISO Catalogue | C7792VXE16-A5.00Z10R |
| Ref. ANSI Catalogue | C7792VXE16-A5.00Z10R |
| [D1MAX] Diamètre de coupe maximal | 127 mm |
| [D1MAX] Diamètre de coupe maximal | 5 in |
| [D1] Diamètre effectif de coupe | 100.58 mm |
| [D1] Diamètre effectif de coupe | 3.96 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 38.1 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | 1.5 in |
| [D6] Diamètre du moyeu | 84 mm |
| [D6] Diamètre du moyeu | 3.307 in |
| [L] Longueur totale | 63 mm |
| [L] Longueur totale | 2.48 in |
| [AP1MAX] 1re profondeur de coupe maximale | 3.5 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .138 in |
| [Z] Nombre de goujures | 10 |
Spiral CircularSlotting: ShoulderSurfaçageFraisage hélicoïdalRamping : ÉbaucheUsinage de pochesLamageFraisage en plongée : Bout hémisphériqueInclined Square End MillCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| 7792 Series • IC16 • Insert Selection Guide | ||||||
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | – | (Sert geometri) | |||
| – | Aşınma direnci |  | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1-P2 | ...M41 | KCPM40 | ...M41 | KCPM40 | ...D41 | KCPM40 |
| P3-P4 | ...M41 | KCPM40 | …D | KCPM40 | …D41 | KCPM40 |
| P5-P6 | ...M41 | KCPM40 | ...D41 | KCPM40 | ...D41 | KCPM40 |
| M1-M2 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| M3 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| K1-K2 | …D | KCK15 | …D | KCK15 | …D | KCPK30 |
| K3 | …D | KCPK30 | …D | KCPK30 | …D | KCPK30 |
| N1-N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1-S2 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| S3 | KCSM40 | SP6519 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| S4 | KCSM40 | SP6519 | ...D41 | KCSM40 | ...D41 | KCSM40 |
| H1 | …D | KC522M | …D | KC522M | …D | KC522M |
| 7792 Series • IC16 • Recommended Starting Feeds [mm/th] | |||||||
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | ||||||
| DOC | 30% | 40–100% | |||||
| (mm) | L | M | H | L | M | H | |
| .S..D | 3,5 | 0,21 | 0,52 | 0,83 | 0,19 | 0,47 | 0,76 |
| .S..D | 2,5 | 0,24 | 0,61 | 0,97 | 0,22 | 0,55 | 0,89 |
| .S..D | 2 | 0,27 | 0,67 | 1,08 | 0,25 | 0,62 | 0,99 |
| .E..D41 | 3,5 | 0,14 | 0,46 | 0,76 | 0,13 | 0,42 | 0,70 |
| .E..D41 | 2,5 | 0,17 | 0,54 | 0,89 | 0,15 | 0,49 | 0,82 |
| .E..D41 | 2 | 0,19 | 0,60 | 0,99 | 0,17 | 0,55 | 0,91 |
| .E..M41 | 2,7 | 0,14 | 0,46 | 0,76 | 0,13 | 0,42 | 0,70 |
| .E..M41 | 2 | 0,19 | 0,60 | 0,99 | 0,17 | 0,55 | 0,91 |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | |||||||
| 7792 Series • IC16 • Recommended Starting Feeds for Plunging [mm/th] | ||||
| Kesici uç geometrisi |  | Diş başına programlanan ilerleme (fz) | ||
| L | M | H | ||
| .S..D | 0,10 | 0,25 | 0,41 | |
| .E..D41 | 0,07 | 0,23 | 0,38 | |
| .E..M41 | 0,07 | 0,23 | 0,38 | |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | ||||
| 7792 Series • IC16 • Recommended Starting Feeds [IPT] | |||||||
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | ||||||
| DOC | 30% | 40–100% | |||||
| (Inch) | L | M | H | L | M | H | |
| .S..D | 0.14 | 0.008 | 0.020 | 0.032 | 0.007 | 0.019 | 0.030 |
| .S..D | 0.1 | 0.009 | 0.024 | 0.038 | 0.009 | 0.022 | 0.035 |
| .S..D | 0.08 | 0.011 | 0.026 | 0.042 | 0.010 | 0.024 | 0.039 |
| .E..D41 | 0.14 | 0.006 | 0.018 | 0.030 | 0.005 | 0.017 | 0.028 |
| .E..D41 | 0.1 | 0.007 | 0.021 | 0.036 | 0.006 | 0.019 | 0.032 |
| .E..D41 | 0.08 | 0.007 | 0.024 | 0.039 | 0.007 | 0.022 | 0.036 |
| .E..M41 | 0.107 | 0.006 | 0.018 | 0.030 | 0.005 | 0.017 | 0.028 |
| .E..M41 | 0.08 | 0.007 | 0.024 | 0.039 | 0.007 | 0.022 | 0.036 |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | |||||||
| 7792 Series • IC16 • Recommended Starting Feeds for Plunging [IPT] | ||||
| Kesici uç geometrisi | | Diş başına programlanan ilerleme (fz) | ||
| L | M | H | ||
| .S..D | 0.004 | 0.010 | 0.016 | |
| .E..D41 | 0.003 | 0.009 | 0.015 | |
| .E..M41 | 0.003 | 0.009 | 0.015 | |
| L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. | ||||
| 7792 Series IC16 • Recommended Starting Speed [m/min] | |||||||||||||||||||||||||
| Kalite | KC522M | KCPK30 | KCPM40 | KCSM40 | SC6525 | SP6519 | X400 | X500 | |||||||||||||||||
| Talaş kalınlığı hex mm | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | |||||||||
| Malzeme grubu | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | |
| P | 1 | 330 | 285 | 270 | 455 | 395 | 370 | 295 | 260 | 245 | 350 | 320 | 300 | 371 | 254 | 142 | 295 | 215 | 130 | 260 | 190 | 120 | 270 | 200 | 130 |
| 2 | 275 | 240 | 200 | 280 | 255 | 230 | 250 | 215 | 180 | 300 | 270 | 220 | 325 | 225 | 121 | 260 | 190 | 115 | 230 | 170 | 105 | 240 | 280 | 115 | |
| 3 | 255 | 215 | 175 | 255 | 230 | 205 | 230 | 195 | 160 | 280 | 240 | 195 | 292 | 200 | 104 | 230 | 165 | 100 | 200 | 150 | 95 | 210 | 155 | 100 | |
| 4 | 225 | 185 | 150 | 225 | 185 | 160 | 205 | 170 | 135 | 240 | 205 | 165 | 208 | 145 | 79 | 175 | 125 | 75 | 150 | 110 | 70 | 160 | 120 | 75 | |
| 5 | 185 | 170 | 150 | 190 | 170 | 150 | 170 | 155 | 135 | 200 | 180 | 160 | 158 | 120 | 79 | 140 | 105 | 70 | – | – | – | 130 | 100 | 70 | |
| 6 | 165 | 125 | 100 | 160 | 135 | 110 | 150 | 115 | 90 | 180 | 140 | 100 | 142 | 100 | 58 | 120 | 85 | 50 | – | – | – | 110 | 80 | 50 | |
| M | 1 | 205 | 180 | 165 | 205 | 185 | 155 | 195 | 170 | 155 | 260 | 210 | 185 | 192 | 154 | 121 | 270 | 195 | 115 | – | – | – | 250 | 185 | 115 |
| 2 | 185 | 160 | 130 | 185 | 160 | 140 | 175 | 150 | 125 | 235 | 180 | 145 | 258 | 183 | 108 | 235 | 170 | 105 | – | – | – | 220 | 160 | 100 | |
| 3 | 140 | 120 | 95 | 145 | 130 | 115 | 130 | 115 | 90 | 175 | 145 | 110 | 208 | 150 | 92 | 195 | 140 | 85 | – | – | – | 180 | 130 | 80 | |
| K | 1 | 230 | 205 | 185 | 295 | 265 | 240 | – | – | – | – | – | – | 392 | 271 | 146 | – | – | – | – | – | – | – | – | – |
| 2 | 180 | 160 | 150 | 235 | 210 | 190 | – | – | – | – | – | – | 304 | 208 | 117 | – | – | – | – | – | – | – | – | – | |
| 3 | 150 | 135 | 120 | 195 | 175 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 40 | 35 | 25 | – | – | – | 40 | 35 | 30 | 50 | 40 | 25 | – | – | – | 55 | 40 | 20 | – | – | – | 45 | 35 | 25 |
| 2 | 40 | 35 | 25 | – | – | – | 40 | 35 | 30 | 55 | 40 | 25 | – | – | – | 45 | 35 | 20 | – | – | – | 45 | 30 | 20 | |
| 3 | 50 | 40 | 25 | – | – | – | 50 | 40 | 30 | 65 | 45 | 30 | – | – | – | 55 | 40 | 25 | – | – | – | 50 | 40 | 25 | |
| 4 | 50 | 45 | 35 | 50 | 45 | 35 | 55 | 50 | 35 | 75 | 60 | 40 | – | – | – | 80 | 55 | 35 | – | – | – | 60 | 50 | 35 | |
| H | 1 | 120 | 90 | 70 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 95 | 70 | 45 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 35 | – | – | – | |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||||||||||||||
| 7792 Series IC16 • Recommended Starting Speed [SFM] | |||||||||||||||||||||||||
| Kalite | KC522M | KCPK30 | KCPM40 | KCSM40 | SC6525 | SP6519 | X400 | X500 | |||||||||||||||||
| Chip Thickness hex Inch | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | |||||||||
| Malzeme grubu | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | |
| P | 1 | 1085 | 935 | 885 | 1495 | 1295 | 1215 | 970 | 855 | 805 | 1150 | 1050 | 985 | 1217 | 833 | 458 | 970 | 705 | 425 | 855 | 625 | 395 | 885 | 655 | 425 |
| 2 | 900 | 785 | 655 | 920 | 835 | 755 | 820 | 705 | 590 | 985 | 885 | 720 | 1067 | 742 | 396 | 855 | 625 | 375 | 755 | 560 | 345 | 785 | 920 | 375 | |
| 3 | 835 | 705 | 575 | 835 | 755 | 675 | 755 | 640 | 525 | 920 | 785 | 640 | 950 | 654 | 346 | 755 | 540 | 330 | 655 | 490 | 310 | 690 | 510 | 330 | |
| 4 | 740 | 605 | 490 | 740 | 605 | 525 | 675 | 560 | 445 | 785 | 675 | 540 | 692 | 475 | 258 | 575 | 410 | 245 | 490 | 360 | 230 | 525 | 395 | 245 | |
| 5 | 605 | 560 | 490 | 625 | 560 | 490 | 560 | 510 | 445 | 655 | 590 | 525 | 525 | 396 | 258 | 460 | 345 | 230 | – | – | – | 425 | 330 | 230 | |
| 6 | 540 | 410 | 330 | 525 | 445 | 360 | 490 | 375 | 295 | 590 | 460 | 330 | 458 | 329 | 196 | 395 | 280 | 165 | – | – | – | 360 | 260 | 165 | |
| M | 1 | 675 | 590 | 540 | 675 | 605 | 510 | 640 | 560 | 510 | 855 | 690 | 605 | 625 | 508 | 396 | 885 | 640 | 375 | – | – | – | 820 | 605 | 375 |
| 2 | 605 | 525 | 425 | 605 | 525 | 460 | 575 | 490 | 410 | 770 | 590 | 475 | 854 | 604 | 358 | 770 | 560 | 345 | – | – | – | 720 | 525 | 330 | |
| 3 | 460 | 395 | 310 | 475 | 425 | 375 | 425 | 375 | 295 | 575 | 475 | 360 | 692 | 492 | 296 | 640 | 460 | 280 | – | – | – | 590 | 425 | 260 | |
| K | 1 | 755 | 675 | 605 | 970 | 870 | 785 | – | – | – | – | – | – | 1279 | 883 | 475 | – | – | – | – | – | – | – | – | – |
| 2 | 590 | 525 | 490 | 770 | 690 | 625 | – | – | – | – | – | – | 1000 | 692 | 375 | – | – | – | – | – | – | – | – | – | |
| 3 | 490 | 445 | 395 | 640 | 575 | 525 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 165 | 130 | 80 | – | – | – | 180 | 130 | 65 | – | – | – | 150 | 115 | 80 |
| 2 | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 180 | 130 | 80 | – | – | – | 150 | 115 | 65 | – | – | – | 150 | 100 | 65 | |
| 3 | 165 | 130 | 80 | – | – | – | 165 | 130 | 100 | 215 | 150 | 100 | – | – | – | 180 | 130 | 80 | – | – | – | 165 | 130 | 80 | |
| 4 | 165 | 150 | 115 | 165 | 150 | 115 | 180 | 165 | 115 | 245 | 195 | 130 | – | – | – | 260 | 180 | 115 | – | – | – | 195 | 165 | 115 | |
| H | 1 | 395 | 295 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 310 | 230 | 150 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 260 | 195 | 115 | – | – | – | |
| Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. | |||||||||||||||||||||||||
| 7792 Series IC16 • Ramping Application Data • Curved Edges • Metric | |||||
| D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [mm] - (min hole diameter) | DH min (minumum delik çapı) |
| 40 | 2.55° | 13 | 16,3 | 50 | 78 |
| 50 | 1.36° | 13 | 26,1 | 70 | 98 |
| 52 | 1.24° | 13 | 28 | 74 | 102 |
| 63 | 0.86° | 13 | 39 | 96 | 124 |
| 66 | 0.8° | 13 | 41,9 | 102 | 130 |
| 80 | 0.58° | 13 | 55,9 | 130 | 158 |
| 100 | 0.42° | 13 | 75,9 | 170 | 198 |
| 125 | 0.32° | 13 | 100,9 | 220 | 248 |
| 160 | 0.23° | 13 | 135,8 | 290 | 318 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Metric | |||||
| D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [mm] - (min hole diameter) | DH min (minumum delik çapı) |
| 40 | 3.7° | 12,3 | 17,85 | 50 | 78 |
| 50 | 2.25° | 12,3 | 27,72 | 70 | 98 |
| 52 | 1.65° | 12,3 | 29,82 | 74 | 102 |
| 63 | 1.4° | 12,3 | 40,8 | 96 | 124 |
| 66 | 1.3° | 12,3 | 43,7 | 102 | 130 |
| 80 | 0.8° | 12,3 | 57,7 | 130 | 158 |
| 100 | 0.65° | 12,3 | 77,53 | 170 | 198 |
| 125 | 0.5° | 12,3 | 102,5 | 220 | 248 |
| 160 | 0.27° | 12,3 | 137,46 | 290 | 318 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC16 • Programing Data • Curved Edges • Metric [mm] | |||
| IC | Köşe radyüsu | R | L |
| 06 | 0,8 | 1,37 | 0,4 |
| 09 | 0,8 | 2,01 | 0,73 |
| 1,2 | 2,27 | 0,67 | |
| 12 | 0,8 | 2,5 | 1,02 |
| 1,2 | 2,73 | 0,97 | |
| 16 | 1,2 | 4,18 | 1,46 |
| 7792 Series IC16 • Programing Data • Straight-Edged Inserts • Metric [mm] | |||
| IC | Köşe radyüsu | R | L |
| 06 | 0,8 | 1,46 | 0,529 |
| 09 | 0,8 | 2,13 | 1,025 |
| 1,2 | 2,25 | 0,95 | |
| 12 | 0,8 | 2,46 | 1,33 |
| 1,2 | 2,79 | 1,27 | |
| 2 | 3,42 | 1,13 | |
| 16 | 1,2 | 3,56 | 1,82 |
| CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0,8mm. | |||
| 7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Inch | |||||
| D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [Inch] - (min hole diameter) | DH min (minumum delik çapı) |
| 1.5 | 4.53° | 0.484 | 0.628 | 1.818 | 2.921 |
| 2.0 | 2.44° | 0.484 | 1.122 | 2.818 | 3.921 |
| 2.5 | 1.51° | 0.484 | 1.626 | 3.818 | 4.921 |
| 3.0 | 0.96° | 0.484 | 2.122 | 4.818 | 5.921 |
| 4.0 | 0.62° | 0.484 | 3.114 | 6.818 | 7.921 |
| 5.0 | 0.52° | 0.484 | 4.114 | 8.818 | 9.921 |
| 6.0 | 0.32° | 0.484 | 5.115 | 10.818 | 11.921 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC16 • Ramping Application Data • Curved Edges • Inch | |||||
| D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [Inch] - (min hole diameter) | DH min (minumum delik çapı) |
| 1.5 | 3° | 0.512 | 0.55 | 1.818 | 2.921 |
| 2.0 | 2.85° | 0.512 | 1.05 | 2.818 | 3.921 |
| 2.5 | 1° | 0.512 | 1.56 | 3.818 | 4.921 |
| 3.0 | 0.58° | 0.512 | 1.96 | 4.818 | 5.921 |
| 4.0 | 0.51° | 0.512 | 2.96 | 6.818 | 7.921 |
| 5.0 | 0.37° | 0.512 | 3.96 | 8.818 | 9.921 |
| 6.0 | 0.27° | 0.512 | 4.96 | 10.818 | 11.921 |
| NOTE: Maximum ramp angle decreases as nose radius increases. | |||||
| 7792 Series IC16 • Programing Data • Curved Edges • Inch [inch] | |||
| IC | Köşe radyüsu | R | L |
| 06 | 0.031 | 0.057 | 0.016 |
| 09 | 0.031 | 0.079 | 0.028 |
| 0.047 | 0.089 | 0.026 | |
| 12 | 0.031 | 0.098 | 0.040 |
| 0.047 | 0.107 | 0.038 | |
| 16 | 0.047 | 0.164 | 0.057 |
| 7792 Series IC16 • Programing Data • Straight-Edged Inserts • Inch [inch] | |||
| IC | Köşe radyüsu | R | L |
| 06 | 0.031 | 0.057 | 0.021 |
| 09 | 0.031 | 0.084 | 0.040 |
| 0.047 | 0.088 | 0.037 | |
| 12 | 0.031 | 0.097 | 0.052 |
| 0.047 | 0.109 | 0.050 | |
| 0.079 | 0.134 | 0.044 | |
| 16 | 0.047 | 0.140 | 0.072 |
| CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0.031". | |||
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?