Surfaçage
Fraisage de côté/avec épaulement : Léger chanfrein
Queue — Cylindrique WeldonDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 1023675 |
| Ref. ISO Catalogue | KIPR046SD2630 |
| Ref. ANSI Catalogue | KIPR046SD2630 |
| [D1] Diamètre effectif de coupe | 11.684 mm |
| [D1] Diamètre effectif de coupe | .46 in |
| [D1MAX] Diamètre de coupe maximal | 19.99 mm |
| [D1MAX] Diamètre de coupe maximal | .787 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 12.7 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | .5 in |
| [L] Longueur totale | 76.2 mm |
| [L] Longueur totale | 3 in |
| [L2] Longueur de tête | 30.988 mm |
| [L2] Longueur de tête | 1.22 in |
| [AP1MAX] 1re profondeur de coupe maximale | 6.21 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .244 in |
| Nombre de plaquettes | 1 |
| T/Min max | 11000 |
| Plaquette étalon | SDEB2.61.52 |
SurfaçageFraisage de côté/avec épaulement : Léger chanfreinQueue — Cylindrique WeldonCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci |  | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci | | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KCPK30 |
| P3–P4 | SEHT | KC725M | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| P5–P6 | SEHT-T | KCPK30 | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| M1–M2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KCPK30 |
| M3 | SEHT | KC725M | SEHT-T | KCPK30 | SEHT-T | KCPK30 |
| K1–K2 | SEHW | KC520M | SEHW | KC520M | SEHW-T | KCPK30 |
| K3 | SEHW | KC520M | SEHW-T | KCPK30 | SEHW-T | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KC725M |
| S3 | SEHT | KC725M | SEHT | KC725M | SEHT-T | KC725M |
| S4 | SEHT | KC725M | SEHT-T | KC725M | SEHT-T | KC725M |
| H1 | – | – | – | – | – | – |
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci | | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | (Sert geometri) | ||||
| – | Aşınma direnci | | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| P3–P4 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| P5–P6 | SDEB | KCPK30 | SDEB | KCPK30 | SDEB | KCPK30 |
| M1–M2 | SDEB | KC725M | SDEB | KC725M | SDEB | KCPK30 |
| M3 | SDEB | KC725M | SDEB | KCPK30 | SDEB | KCPK30 |
| K1–K2 | SDEB | KC520M | SDEB | KC520M | SDEB | KCPK30 |
| K3 | SDEB | KC520M | SDEB | KCPK30 | SDEB | KCPK30 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S3 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| S4 | SDEB | KC725M | SDEB | KC725M | SDEB | KC725M |
| H1 | – | – | – | – | – | – |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .004 | .015 | .030 | .003 | .011 | .022 | .003 | .009 | .019 | .003 | .009 | .018 | .002 | .009 | .017 | SDEB |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .005 | .018 | .037 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .022 | .003 | .011 | .021 | SDEB |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SEH. | .005 | .018 | .037 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .022 | .003 | .011 | .021 | SEH. |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| SDEB | .007 | .026 | .053 | .005 | .019 | .038 | .005 | .016 | .033 | .004 | .015 | .031 | .004 | .015 | .030 | SDEB |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Malzeme grubu | KC510M | KC520M | KC725M | KCK15 | KCPK30 | |||||||||||
| P | 1 | – | – | – | – | – | – | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
| 2 | – | – | – | – | – | – | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
| 3 | – | – | – | – | – | – | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
| 4 | – | – | – | – | – | – | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
| 5 | – | – | – | – | – | – | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
| 6 | – | – | – | – | – | – | 520 | 400 | 310 | – | – | – | 620 | 540 | - | |
| M | 1 | – | – | – | – | – | – | 670 | 590 | 540 | – | – | – | 820 | 720 | 620 |
| 2 | – | – | – | – | – | – | 610 | 520 | 430 | – | – | – | 730 | 640 | 550 | |
| 3 | – | – | – | – | – | – | 460 | 400 | 310 | – | – | – | 570 | 520 | 460 | |
| K | 1 | – | – | – | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
| 2 | – | – | – | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
| 3 | – | – | – | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
| N | 1–2 | 2520 | 2240 | 2060 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 2280 | 2100 | 1920 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Malzeme grubu | KC520M | KC725M | KCPK30 | |||||||
| P | 1 | – | – | – | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 520 | 400 | 310 | 620 | 540 | - | |
| M | 1 | – | – | – | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | 1060 | 960 | 850 | – | – | – | 1160 | 1050 | 940 |
| 2 | 830 | 740 | 700 | – | – | – | 920 | 830 | 760 | |
| 3 | 700 | 620 | 560 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?