Fraisage hélicoïdal
Ramping : Ébauche
Fraisage de côté/avec épaulement : Bout hémisphérique
Profilage 3D
Fraisage — Arrosage interne
Fraisage — 3 tailles
Usinage de pochesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 2610688 |
| Ref. ISO Catalogue | 200C09RSRC19CU |
| Ref. ANSI Catalogue | BMD800R6409S250L250 |
| [D1MAX] Diamètre de coupe maximal | 203.2 mm |
| [D1MAX] Diamètre de coupe maximal | 8 in |
| [D1] Diamètre effectif de coupe | 184.15 mm |
| [D1] Diamètre effectif de coupe | 7.25 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 63.5 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | 2.5 in |
| [D6] Diamètre du moyeu | 127 mm |
| [D6] Diamètre du moyeu | 5 in |
| [L] Longueur totale | 63.5 mm |
| [L] Longueur totale | 2.5 in |
| [AP1MAX] 1re profondeur de coupe maximale | 9.525 mm |
| [AP1MAX] 1re profondeur de coupe maximale | .375 in |
| Nombre de plaquettes | 9 |
| Angle de ramping maximum | 0.59 |
| T/Min max | 12500 |
| Plaquette étalon | RCG_64___ |
| Poids Livres | 13.08 |
Fraisage hélicoïdalRamping : ÉbaucheFraisage de côté/avec épaulement : Bout hémisphériqueProfilage 3DFraisage — Arrosage interneFraisage — 3 taillesUsinage de pochesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
| – | (Hafif geometri) | – | (Sert geometri) | |||
| – | Aşınma direnci |  | Tokluk | |||
| – | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
| P1–P2 | .E..LF | KC725M | .S..GF | KC725M | .S..HF | KC725M |
| P3–P4 | .E..LF | KC522M | .S..GF | KC725M | .S..HF | KCPK30 |
| P5–P6 | .E..LF | KC522M | .S..HF | KCPK30 | .S..HF | KCPK30 |
| M1–M2 | .E..LF | KC725M | .S..GF | KC725M | .S..HF | KC725M |
| M3 | .E..LF | KCPK30 | .S..GF | KC725M | .S..HF | KCPK30 |
| K1–K2 | – | – | .S..HF | KCPK30 | – | – |
| K3 | – | – | .S..HF | KCPK30 | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .E..LF | KC725M | .S..GF | KC725M | .S..HF | KC725M |
| S3 | .E..LF | KC725M | .S..GF | KC725M | .S..HF | KC725M |
| S4 | .E..LF | KC725M | .S..GF | KC725M | .S..HF | KC725M |
| H1 | – | – | – | – | – | – |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .004 | .007 | .013 | .003 | .005 | .009 | .002 | .004 | .008 | .002 | .004 | .008 | .002 | .004 | .008 | .E..LF |
| .S..GF | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..GF |
| .S..HF | .007 | .017 | .028 | .005 | .013 | .020 | .004 | .011 | .018 | .004 | .010 | .016 | .004 | .010 | .016 | .S..HF |
| Hafif işleme | Genel amaçlı kullanım | Ağır işleme |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .007 | .014 | .027 | .005 | .011 | .020 | .005 | .009 | .017 | .004 | .009 | .016 | .004 | .008 | .015 | .E..LF |
| .S..GF | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..GF |
| .S..HF | .014 | .036 | .059 | .010 | .026 | .042 | .009 | .023 | .036 | .008 | .021 | .034 | .008 | .021 | .033 | .S..HF |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .004 | .008 | .015 | .003 | .006 | .011 | .003 | .005 | .009 | .003 | .005 | .009 | .002 | .005 | .009 | .E..LF |
| .S..GF | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..GF |
| .S..HF | .008 | .020 | .032 | .006 | .015 | .023 | .005 | .013 | .020 | .005 | .012 | .019 | .005 | .012 | .018 | .S..HF |
| Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | Kesici uç geometrisi | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LF | .005 | .010 | .019 | .004 | .008 | .014 | .004 | .007 | .012 | .003 | .006 | .012 | .003 | .006 | .011 | .E..LF |
| .S..GF | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..GF |
| .S..HF | .010 | .026 | .042 | .008 | .019 | .031 | .007 | .017 | .027 | .006 | .015 | .025 | .006 | .015 | .024 | .S..HF |
| Malzeme grubu | KC522M | KC715M | KC725M | KCPK30 | |||||||||
| P | 1 | 1300 | 1130 | 1060 | 1340 | 1180 | 1090 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | 1080 | 950 | 790 | 830 | 740 | 670 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | 1000 | 840 | 700 | 740 | 670 | 610 | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | 890 | 730 | 590 | 560 | 520 | 470 | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | 730 | 660 | 590 | 770 | 680 | 620 | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | 650 | 490 | 400 | 470 | 410 | – | 520 | 400 | 310 | 620 | 540 | – | |
| M | 1 | 800 | 710 | 650 | 880 | 770 | 710 | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | 730 | 620 | 520 | – | – | – | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | 550 | 480 | 370 | – | – | – | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | 900 | 820 | 720 | – | – | – | – | – | – | 1160 | 1050 | 940 |
| 2 | 710 | 640 | 590 | – | – | – | – | – | – | 920 | 830 | 760 | |
| 3 | 590 | 530 | 480 | – | – | – | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | 160 | 140 | 110 | – | – | – | 140 | 120 | 100 | – | – | – |
| 2 | 160 | 140 | 110 | – | – | – | 140 | 120 | 100 | – | – | – | |
| 3 | 200 | 160 | 110 | – | – | – | 180 | 140 | 100 | – | – | – | |
| 4 | 280 | 200 | 140 | – | – | – | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?