Arrosage — interneDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 3860974 |
| Ref. ISO Catalogue | SIF70KST300AR5M |
| Ref. ANSI Catalogue | SIF70KST300AR5M |
| [CSWS] Taille du système côté pièce à usiner | KST300 |
| [D1] Adaptateur / Queue / Diamètre d’alésage | 32.5 mm |
| [D1] Adaptateur / Queue / Diamètre d’alésage | 1.28 in |
| [D1MAX] Adaptateur/Diamètre d’alésage maximum | 37.499 mm |
| [D1MAX] Adaptateur/Diamètre d’alésage maximum | 1.476 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 70 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | 2.756 in |
| [L1] Longueur de référence | 208 mm |
| [L1] Longueur de référence | 8.189 in |
| [L2] Longueur exploitable | 169 mm |
| [L2] Longueur exploitable | 6.654 in |
| Couple Newton mètres | 13 |
| Couple Livres Pied | 9.7 |
Arrosage — interneCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Material | Cermet Tipped | Carbide Tipped | |||||||||||||||||||||
 |  | |  | |  | | | ||||||||||||||||
| straight flute | helical flute | straight flute | helical flute | helical flute | |||||||||||||||||||
| KT325 | KT6215 | K605 | KC6005 | KC6305 | Metric | ||||||||||||||||||
| Cutting Speed | Recommended Feed Rate per Tooth | ||||||||||||||||||||||
| Range | Tool Ø (mm) | 14,00–19,99 | 20,00–32,00 | 32,50–42,00 | |||||||||||||||||||
| Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Feed/Tooth | Min | Max | Min | Max | Min | Max | ||
| P | 1 | 150 | 180 | 210 | 180 | 210 | 240 | 40 | 60 | 70 | 90 | 120 | 155 | 90 | 120 | 155 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 |
| 2 | 150 | 180 | 210 | 180 | 210 | 240 | 40 | 60 | 70 | 90 | 120 | 155 | 90 | 120 | 155 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 3 | 130 | 160 | 180 | 150 | 180 | 210 | 30 | 40 | 50 | 75 | 100 | 130 | 75 | 100 | 130 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 4 | 100 | 130 | 150 | 120 | 150 | 170 | 25 | 40 | 45 | 50 | 80 | 105 | 50 | 80 | 105 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 5 | 80 | 100 | 120 | 100 | 130 | 150 | 10 | 20 | 30 | 30 | 40 | 55 | 30 | 40 | 55 | mm/z | 0,08 | 0,18 | 0,08 | 0,20 | 0,08 | 0,22 | |
| 6 | 80 | 100 | 120 | 100 | 130 | 150 | 10 | 20 | 30 | 30 | 40 | 55 | 30 | 40 | 55 | mm/z | 0,08 | 0,18 | 0,08 | 0,20 | 0,08 | 0,22 | |
| M | 1 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,08 | 0,15 | 0,08 | 0,18 | 0,08 | 0,20 |
| 2 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,08 | 0,15 | 0,08 | 0,18 | 0,08 | 0,20 | |
| 3 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,08 | 0,15 | 0,08 | 0,18 | 0,08 | 0,20 | |
| K | 1 | 150 | 180 | 200 | 180 | 210 | 240 | 30 | 50 | 60 | 80 | 110 | 130 | 80 | 110 | 130 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 |
| 2 | 130 | 160 | 180 | 150 | 180 | 210 | 25 | 40 | 45 | 65 | 90 | 110 | 65 | 90 | 110 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 3 | 100 | 130 | 160 | 120 | 150 | 170 | 20 | 30 | 40 | 50 | 70 | 90 | 50 | 70 | 90 | mm/z | 0,10 | 0,18 | 0,10 | 0,20 | 0,10 | 0,22 | |
| N | 1 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 |
| 2 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| 3 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| 4 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| 5 | – | – | – | – | – | – | 105 | 140 | 180 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| S | 1 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,06 | 0,15 | 0,10 | 0,18 | 0,10 | 0,20 |
| 2 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,06 | 0,15 | 0,10 | 0,18 | 0,10 | 0,20 | |
| 3 | – | – | – | – | – | – | 15 | 20 | 30 | – | – | – | 20 | 30 | 40 | mm/z | 0,08 | 0,18 | 0,10 | 0,20 | 0,10 | 0,20 | |
| 4 | – | – | – | – | – | – | 15 | 20 | 30 | – | – | – | 20 | 30 | 40 | mm/z | 0,08 | 0,18 | 0,10 | 0,20 | 0,10 | 0,20 | |
| Material | Cermet Tipped | Carbide Tipped | |||||||||||||||||||||
| | | | | | | | ||||||||||||||||
| straight flute | helical flute | straight flute | helical flute | ||||||||||||||||||||
| KT325 | KT6215 | K605 | KC6005 | KC6305 | Inch | ||||||||||||||||||
| Cutting Speed | Recommended Feed Rate per Tooth | ||||||||||||||||||||||
| Range | Tool Ø (inch) | .551-.787 | .787-1.260 | 1.280-1.654 | |||||||||||||||||||
| Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Feed/Tooth | Min | Max | Min | Max | Min | Max | ||
| P | 1 | 492 | 590 | 689 | 590 | 689 | 787 | 131 | 197 | 230 | 295 | 394 | 508 | 295 | 394 | 508 | inch/z | .004 | .008 | .004 | .009 | .004 | .010 |
| 2 | 492 | 590 | 689 | 590 | 689 | 787 | 131 | 197 | 230 | 295 | 394 | 508 | 295 | 394 | 508 | inch/z | .004 | .008 | .004 | .009 | .004 | .010 | |
| 3 | 426 | 525 | 590 | 492 | 590 | 689 | 98 | 131 | 164 | 246 | 328 | 426 | 246 | 328 | 426 | inch/z | .004 | .008 | .004 | .009 | .004 | .010 | |
| 4 | 328 | 426 | 492 | 394 | 492 | 558 | 82 | 131 | 148 | 164 | 262 | 344 | 164 | 262 | 344 | inch/z | .004 | .008 | .004 | .009 | .004 | .010 | |
| 5 | 262 | 328 | 394 | 328 | 426 | 492 | 33 | 66 | 98 | 98 | 131 | 180 | 98 | 131 | 180 | inch/z | .003 | .007 | .003 | .008 | .003 | .009 | |
| 6 | 262 | 328 | 394 | 328 | 426 | 492 | 33 | 66 | 98 | 98 | 131 | 180 | 98 | 131 | 180 | inch/z | .003 | .007 | .003 | .008 | .003 | .009 | |
| M | 1 | – | – | – | – | – | – | 26 | 33 | 49 | – | – | – | 49 | 66 | 92 | inch/z | .003 | .006 | .003 | .007 | .003 | .008 |
| 2 | – | – | – | – | – | – | 26 | 33 | 49 | – | – | – | 49 | 66 | 92 | inch/z | .003 | .006 | .003 | .007 | .003 | .008 | |
| 3 | – | – | – | – | – | – | 26 | 33 | 49 | – | – | – | 49 | 66 | 92 | inch/z | .003 | .006 | .003 | .007 | .003 | .008 | |
| K | 1 | 492 | 590 | 656 | 590 | 689 | 787 | 98 | 164 | 197 | 262 | 361 | 426 | 262 | 361 | 426 | inch/z | .004 | .008 | .004 | .009 | .004 | .010 |
| 2 | 426 | 525 | 590 | 492 | 590 | 689 | 82 | 131 | 148 | 213 | 295 | 361 | 213 | 295 | 361 | inch/z | .004 | .008 | .004 | .009 | .004 | .010 | |
| 3 | 328 | 426 | 525 | 394 | 492 | 558 | 66 | 98 | 131 | 164 | 230 | 295 | 164 | 230 | 295 | inch/z | .004 | .007 | .004 | .008 | .004 | .009 | |
| N | 1 | – | – | – | – | – | – | 361 | 492 | 640 | – | – | – | – | – | – | inch/z | .004 | .012 | .004 | .012 | .004 | .012 |
| 2 | – | – | – | – | – | – | 361 | 492 | 640 | – | – | – | – | – | – | inch/z | .004 | .012 | .004 | .012 | .004 | .012 | |
| 3 | – | – | – | – | – | – | 361 | 492 | 640 | – | – | – | – | – | – | inch/z | .004 | .012 | .004 | .012 | .004 | .012 | |
| 4 | – | – | – | – | – | – | 361 | 492 | 640 | – | – | – | – | – | – | inch/z | .004 | .012 | .004 | .012 | .004 | .012 | |
| 5 | – | – | – | – | – | – | 344 | 459 | 590 | – | – | – | – | – | – | inch/z | .004 | .012 | .004 | .012 | .004 | .012 | |
| S | 1 | – | – | – | – | – | – | 26 | 33 | 49 | – | – | – | 49 | 66 | 92 | inch/z | .002 | .006 | .004 | .007 | .004 | .008 |
| 2 | – | – | – | – | – | – | 26 | 33 | 49 | – | – | – | 49 | 66 | 92 | inch/z | .002 | .006 | .004 | .007 | .004 | .008 | |
| 3 | – | – | – | – | – | – | 49 | 66 | 98 | – | – | – | 66 | 98 | 131 | inch/z | .003 | .007 | .004 | .008 | .004 | .008 | |
| 4 | – | – | – | – | – | – | 49 | 66 | 98 | – | – | – | 66 | 98 | 131 | inch/z | .003 | .007 | .004 | .008 | .004 | .008 | |
| Cermet Tipped | Carbide Tipped | ||||||||||||||||||||||
| | | | | | | | ||||||||||||||||
| straight flute | helical flute | straight flute | helical flute | helical flute | |||||||||||||||||||
| KT325 | KT6215 | K605 | KC6005 | KC6305 | Metric | ||||||||||||||||||
| Cutting Speed | Recommended Feed Rate per Tooth | ||||||||||||||||||||||
| Range | Tool Ø (mm) | 14,00–19,99 | 20,00–32,00 | 32,50–42,00 | |||||||||||||||||||
| Material | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Min | Starting Value | Max | Feed/Tooth | Min | Max | Min | Max | Min | Max | |
| P | 1 | 150 | 180 | 210 | 180 | 210 | 240 | 40 | 60 | 70 | 90 | 120 | 155 | 90 | 120 | 155 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 |
| 2 | 150 | 180 | 210 | 180 | 210 | 240 | 40 | 60 | 70 | 90 | 120 | 155 | 90 | 120 | 155 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 3 | 130 | 160 | 180 | 150 | 180 | 210 | 30 | 40 | 50 | 75 | 100 | 130 | 75 | 100 | 130 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 4 | 100 | 130 | 150 | 120 | 150 | 170 | 25 | 40 | 45 | 50 | 80 | 105 | 50 | 80 | 105 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 5 | 80 | 100 | 120 | 100 | 130 | 150 | 10 | 20 | 30 | 30 | 40 | 55 | 30 | 40 | 55 | mm/z | 0,08 | 0,18 | 0,08 | 0,20 | 0,08 | 0,22 | |
| 6 | 80 | 100 | 120 | 100 | 130 | 150 | 10 | 20 | 30 | 30 | 40 | 55 | 30 | 40 | 55 | mm/z | 0,08 | 0,18 | 0,08 | 0,20 | 0,08 | 0,22 | |
| M | 1 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,08 | 0,15 | 0,08 | 0,18 | 0,08 | 0,20 |
| 2 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,08 | 0,15 | 0,08 | 0,18 | 0,08 | 0,20 | |
| 3 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,08 | 0,15 | 0,08 | 0,18 | 0,08 | 0,20 | |
| K | 1 | 150 | 180 | 200 | 180 | 210 | 240 | 30 | 50 | 60 | 80 | 110 | 130 | 80 | 110 | 130 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 |
| 2 | 130 | 160 | 180 | 150 | 180 | 210 | 25 | 40 | 45 | 65 | 90 | 110 | 65 | 90 | 110 | mm/z | 0,10 | 0,20 | 0,10 | 0,22 | 0,10 | 0,25 | |
| 3 | 100 | 130 | 160 | 120 | 150 | 170 | 20 | 30 | 40 | 50 | 70 | 90 | 50 | 70 | 90 | mm/z | 0,10 | 0,18 | 0,10 | 0,20 | 0,10 | 0,22 | |
| N | 1 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 |
| 2 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| 3 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| 4 | – | – | – | – | – | – | 110 | 150 | 195 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| 5 | – | – | – | – | – | – | 105 | 140 | 180 | – | – | – | – | – | – | mm/z | 0,10 | 0,30 | 0,10 | 0,30 | 0,10 | 0,30 | |
| S | 1 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,06 | 0,15 | 0,10 | 0,18 | 0,10 | 0,20 |
| 2 | – | – | – | – | – | – | 8 | 10 | 15 | – | – | – | 15 | 20 | 28 | mm/z | 0,06 | 0,15 | 0,10 | 0,18 | 0,10 | 0,20 | |
| 3 | – | – | – | – | – | – | 15 | 20 | 30 | – | – | – | 20 | 30 | 40 | mm/z | 0,08 | 0,18 | 0,10 | 0,20 | 0,10 | 0,20 | |
| 4 | – | – | – | – | – | – | 15 | 20 | 30 | – | – | – | 20 | 30 | 40 | mm/z | 0,08 | 0,18 | 0,10 | 0,20 | 0,10 | 0,20 | |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?