Le damos la bienvenida
Confirme sus preferencias
Actualizar preferencias
Sugerencias de productos
Product Family suggestions
Kennametal a su servicio
Hola, User Name
Su cuenta seleccionada:
Hay un problema con su cuenta. Por favor, póngase en contacto con el servicio de atención al cliente.
Número de cliente Cambiar cuenta
Dirección de envío (#) Cambiar cuenta
- Panel de control
- Gestionar pedidos
- Gestionar canales
- Libreta de direcciones
Notifications
Mark all as read- Cambiar contraseña
- Mi perfil
- Cerrar sesión
Artículo(s) añadido correctamente al carrito
Ver carrito
Ver carrito
Kennametal a su servicio
Artículo(s) añadido correctamente al carrito
Ver carrito
Ver carrito
Edición de la solución
Añadiendo solución
Nombre de la solución:{{SolutionName}}- Productos
- /
- Drill Fix™ DFT™ • ST Inserts
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Drill Fix™ DFT™ • ST Inserts
Drill Fix™ DFT™ • ST Inserts
Features and benefits
- Plaquitas con punta PCD para mecanizar materiales no ferrosos.
- Una alta resistencia al desgaste implica una vida de la herramienta larga.
- Mayor productividad con avances altos.
ADVERTENCIA • Drill Fix DFR
WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
D | LS | CS |
32 | 58 | R 1/4 BSP |
40 | 68 | R 1/4 BSP |
50 | 68 | R 1/4 BSP |
DFT™ • PCD • Sistema métrico
Metric | |||||||||||||||
Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
Range | |||||||||||||||
Min | Starting Value | Max | Ø | DFT03 16 | DFT05 25 | DFT06 33 | DFT07 41 | DFT09 49 | DFT11 69 | ||||||
N | 1 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
I | ST/C | KD1425 | |||||||||||||
2 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
I | ST/C | KD1425 | |||||||||||||
3 | S | O | ST/C | KD1425 | 413 | 619 | 743 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
I | ST/C | KD1425 | |||||||||||||
4 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
I | ST/C | KD1425 | |||||||||||||
5 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/r | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
I | ST/C | KD1425 |
Inch | |||||||||||||||
Material | Condition | Pocket Seat | Geometry | Grade | Cutting Speed | Recommended Feed Rate (f) by Diameter | |||||||||
Range | |||||||||||||||
Min | Starting Value | Max | Ø | DFT03 .625–.969" | DFT05 .984–1.250" | DFT06 1.313–1.563" | DFT07 1.625–1.875" | DFT09 1.938–2.125" | DFT11 2.750–3.250" | ||||||
N | 1 | S | O | ST/C | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
I | ST/C | KD1425 | |||||||||||||
2 | S | O | ST/C | KD1425 | 1465 | 2197 | 2636 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
I | ST/C | KD1425 | |||||||||||||
3 | S | O | ST/C | KD1425 | 1355 | 2032 | 2438 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
I | ST/C | KD1425 | |||||||||||||
4 | S | O | ST/C | KD1425 | 1465 | 2197 | 2636 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
I | ST/C | KD1425 | |||||||||||||
5 | S | O | ST/C | KD1425 | 1575 | 2362 | 2834 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
I | ST/C | KD1425 |
Metric | |||||||||||||||
Cutting Speed | |||||||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||||
Material | Condition | Pocket Seat | Geometry | Grade | Min | Starting Value | Max | Ø | DFT03 16 | DFT05 25 | DFT06 33 | DFT07 41 | DFT09 49 | DFT11 69 | |
N | 1 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |
1 | S | I | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
2 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
2 | S | I | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
3 | S | O | ST/C | KD1425 | 413 | 619 | 743 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
3 | S | I | ST/C | KD1425 | 413 | 619 | 743 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
4 | S | O | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
4 | S | I | ST/C | KD1425 | 447 | 670 | 804 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
5 | S | O | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 | |
5 | S | I | ST/C | KD1425 | 480 | 720 | 864 | mm/omw | 0,05–0,07 | 0,07–0,09 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,14–0,18 |