Producto similar a:
Plaquitas para Fix-Perfect™ 90° • SPHX1205-W • Acabado • GP
Plaquitas intercambiables • SPHX1205... • Desbaste • Acabado
Número de material1712981
Referencia ISOSPHX1205PCER-GP1WBReferencia ANSISPHX1205PCER-GP1WB
- K Fundición
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Información general
- Datos de aplicación
- Descargas
- Piezas compatibles Lado máquina
- Comentarios
- Preguntas y Respuestas
Número de material | 1712981 |
Referencia ISO | SPHX1205PCER-GP1WB |
Referencia ANSI | SPHX1205PCER-GP1WB |
Calidad | KC520M |
Longitud de filo de corte de plaquita [L10] | 11 mm |
Longitud de filo de corte de plaquita [L10] | .4331 in |
Grosor de plaquita [S] | 5.5 mm |
Grosor de plaquita [S] | .2165 in |
Longitud de cara de esquina [BS] | 2 mm |
Longitud de cara de esquina [BS] | .0787 in |
Grosor medio de las virutas [HM] | 0.02 mm |
Grosor medio de las virutas [HM] | .0008 in |
Filos de corte por plaquita | 1 |
Materiales de la pieza de trabajo
- Fundición
Grades
KC520M
Calidad de metal duro recubierto con una capa de TiAlN (PVD). KC520M es una calidad de metal duro desarrollada específicamente para el mecanizado general de fundición dúctil. Esta calidad puede usarse con o sin refrigerante.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
Insert Selection
Guía para la selección de plaquitas
Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
(Geometría ligera) | – | (Geometría fuerte) | ||||
resistencia | tenacidad | |||||
Geometría | Calidad | Geometría | Calidad | Geometría | Calidad | |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | .E..GPB | KC520M | .E..GPB | KCK15 | .S..GPB | KCK15 |
K3 | .E..GPB | KC520M | .E..GPB | KCK15 | .S..GPB | KCK15 |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Guía para la selección de plaquitas
Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
(Geometría ligera) | – | (Geometría fuerte) | ||||
resistencia | tenacidad | |||||
Geometría | Calidad | Geometría | Calidad | Geometría | Calidad | |
P1–P2 | – | – | – | – | – | – |
P3–P4 | – | – | – | – | – | – |
P5–P6 | – | – | – | – | – | – |
M1–M2 | – | – | – | – | – | – |
M3 | – | – | – | – | – | – |
K1–K2 | .E..GP | KC520M | .E..GP | KCK15 | .E..GP | KCK15 |
K3 | .E..GP | KC520M | .E..GP | KCK15 | .S..GP | KCPK30 |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
Feeds
Avances iniciales recomendados [mm]
Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..GPB | 0,12 | 0,46 | 0,82 | 0,08 | 0,33 | 0,59 | 0,06 | 0,25 | 0,44 | 0,06 | 0,22 | 0,38 | 0,05 | 0,20 | 0,35 | .E..GPB |
.T..GPB | 0,23 | 0,59 | 0,95 | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,25 | 0,41 | .T..GPB |
.S..GPB | 0,23 | 0,59 | 0,95 | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,25 | 0,41 | .S..GPB |
Avances iniciales recomendados [mm]
Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | ||||||||||||
.E..GP | 0,12 | 0,46 | 0,82 | 0,08 | 0,33 | 0,59 | 0,06 | 0,25 | 0,44 | 0,06 | 0,22 | 0,38 | 0,05 | 0,20 | 0,35 | .E..GP |
.S..GP | 0,23 | 0,59 | 0,95 | 0,17 | 0,43 | 0,68 | 0,13 | 0,32 | 0,51 | 0,11 | 0,28 | 0,44 | 0,10 | 0,25 | 0,41 | .S..GP |
Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
Speeds
Velocidades iniciales recomendadas (m/min)
Grupo de materiales | KB1340 | KC520M | KCK15 | KTPK20 | KCPK30 | KY3500 | |||||||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | 1370 | 915 | 490 | 270 | 245 | 215 | 420 | 385 | 340 | 230 | 195 | 160 | 295 | 265 | 240 | 805 | 730 | 650 |
2 | – | – | – | 210 | 190 | 175 | 335 | 295 | 275 | 185 | 150 | 130 | 235 | 210 | 190 | 635 | 570 | 530 | |
3 | – | – | – | 175 | 160 | 145 | 280 | 250 | 230 | 150 | 130 | 105 | 195 | 175 | 160 | 535 | 475 | 435 | |
N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Velocidades iniciales recomendadas (m/min)
Grupo de materiales | KB1340 | KC520M | KCK15 | KCPK30 | KY3500 | |||||||||||
P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
K | 1 | 1370 | 915 | 490 | 270 | 245 | 215 | 420 | 385 | 340 | 295 | 265 | 240 | 805 | 730 | 650 |
2 | – | – | – | 210 | 190 | 175 | 335 | 295 | 275 | 235 | 210 | 190 | 635 | 570 | 530 | |
3 | – | – | – | 175 | 160 | 145 | 280 | 250 | 230 | 195 | 175 | 160 | 535 | 475 | 435 | |
N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Datos de aplicación
Conjunto de plaquitas para fresas de fundición Fix-Perfect™
roughing | procedures | roughing/finishing | |||
insert seat | insert seat | ||||
estándar | adjustable | estándar | adjustable | ||
― | 1 | Reset adjusting element T x T9 | ― | ||
2 | insert roughing insert tighten SW 3 MAn = 5 Nm | ― | |||
― | 3 | tighten adjusting element gently | ― | ― | |
4 | insert finishing insert and pre-tighten SW 3 M VG = 1 Nm | ― | |||
5 | the finishing insert is positioned 0,04mm in front of the highest roughing insert | ― | 0,04 mm (0.0016 pulg.) | ||
6 | tighten the finishing insert MAn = 5 Nm | ― |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use