Producto similar a:
K105 (~5 x D) • K10 • Mango A • Brocas TF
Brocas TF • Altas tasas de evacuación del metal • Sin refrigerante
Número de material1153179
Referencia ISOK105A03594Referencia ANSIK105A03594
- K Fundición
- N Materiales no ferrosos
- S Aleaciones de alta temperatura
Taladrado
Taladrado: Salida inclinada
Refrigerante para caudal: Taladrado
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
Profundidad de taladrado: 5x
Drilling: Cross-Hole Drilling
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Información general
- Datos de aplicación
- Descargas
- Piezas compatibles Lado máquina
- Comentarios
- Preguntas y Respuestas
Número de material | 1153179 |
Referencia ISO | K105A03594 |
Referencia ANSI | K105A03594 |
Calidad | K10 |
Diámetro de broca M [D1] | 9.1288 mm |
Diámetro de broca M [D1] | .3594 in |
Longitud total [L] | 103 mm |
Longitud total [L] | 4.055 in |
Longitud del canal [L3] | 60 mm |
Longitud del canal [L3] | 2.362 in |
Profundidad máxima de taladrado [L4] | 48.7 mm |
Profundidad máxima de taladrado [L4] | 1.917 in |
Longitud de punta de broca [L5] | 2.28 mm |
Longitud de punta de broca [L5] | .0898 in |
Longitud de mango [LS] | 40.5 mm |
Longitud de mango [LS] | 1.594 in |
Adaptador/Mango/Diá int [D] | 9.525 mm |
Adaptador/Mango/Diá int [D] | .375 in |
Materiales de la pieza de trabajo
- Fundición
- Materiales no ferrosos
- Aleaciones de alta temperatura
Uses and application
Taladrado
Taladrado: Salida inclinada
Refrigerante para caudal: Taladrado
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
Profundidad de taladrado: 5x
Drilling: Cross-Hole Drilling
Features and benefits
- TF drills without through coolant for high metal removal rates and excellent hole quality in short chipping materials such as gray cast iron, ductile iron, and aluminum, as well as in short-hole titanium applications.
- Material-specific SC drill with three cutting edges for higher feed rates than with two-edged drills.
- Three spacious flutes for rapid chip evacuation.
- Three-margin lands deliver better hole quality and straightness than two-flute drills.
- TiAlN-coated KC7210™ grade for higher wear resistance at elevated speeds.
- Uncoated K10™ grade helps to prevent built-up edge in drilling aluminum and high-temp alloys.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
Tolerancia
Tolerance • Inch | ||
nominal size range | D1 tolerance m7 | D tolerance h6 |
.0002/.0006 | .0000/-.0003 | |
.0002/.0008 | .0000/-.0004 | |
.0003/.0010 | .0000/-.0004 | |
.0003/.0011 | .0000/-.0005 |
Tolerance • Metric | ||
nominal size range | D1 tolerance m7 | D tolerance h6 |
0,004/0,016 | 0,000/-0,008 | |
0,006/0,021 | 0,000/-0,009 | |
0,007/0,025 | 0,000/-0,011 | |
0,008/0,029 | 0,000/-0,013 |
Datos de aplicación
Brocas TF • Serie B105 • Calidad K10™ • Refrigerante para caudal • Diámetros de broca de 0.1181–0.7874″ • Pulgadas
Material | |||||||||||||
Cutting Speed | Metric | ||||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
K | 1 | 60 | 85 | 110 | mm/r | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 70 | 90 | mm/r | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 50 | 70 | mm/r | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | 0,02–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/r | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | 0,03–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 250 | 250 | mm/r | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
3 | 100 | 180 | 400 | mm/r | 0,09–0,16 | 0,10–0,20 | 0,12–0,26 | 0,16–0,36 | 0,20–0,40 | 0,24–0,45 | 0,30–0,50 | 0,34–0,60 | |
4 | 60 | 170 | 250 | mm/r | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 20 | 20 | 50 | mm/r | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
Material | |||||||||||||
Material | Cutting Speed | Inch | |||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
K | 1 | 200 | 280 | 360 | IPR | .004–.008 | .005–.008 | .006–.011 | .008–.014 | .009–.017 | .009–.020 | .011–.024 | .012–.027 |
2 | 230 | 230 | 300 | IPR | .004–.008 | .005–.008 | .006–.011 | .008–.014 | .009–.017 | .009–.020 | .011–.024 | .012–.027 | |
3 | 160 | 160 | 230 | IPR | .004–.007 | .004–.007 | .006–.010 | .007–.013 | .001–.016 | .009–.019 | .010–.023 | .011–.026 | |
N | 1 | 330 | 690 | 1340 | IPR | .004–.006 | .004–.008 | .007–.013 | .008–.015 | .010–.017 | .001–.020 | .017–.023 | .025–.031 |
2 | 330 | 820 | 820 | IPR | .004–.008 | .005–.008 | .007–.013 | .010–.017 | .012–.020 | .014–.023 | .017–.029 | .021–.035 | |
3 | 330 | 590 | 1310 | IPR | .004–.006 | .004–.008 | .005–.010 | .006–.014 | .008–.016 | .009–.018 | .012–.020 | .013–.024 | |
4 | 200 | 560 | 820 | IPR | .003–.006 | .005–.007 | .007–.013 | .008–.014 | .009–.015 | .013–.018 | .015–.019 | .023–.030 | |
S | 4 | 70 | 70 | 160 | IPR | .001–.002 | .002–.003 | .003–.004 | .004–.005 | .004–.006 | .005–.007 | .007–.009 | .009–.012 |
Cutting Speed | Metric | ||||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
K | 1 | 60 | 85 | 110 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 |
2 | 70 | 72 | 90 | mm/dev | 0,11–0,20 | 0,12–0,20 | 0,16–0,28 | 0,20–0,35 | 0,22–0,42 | 0,24–0,50 | 0,28–0,61 | 0,30–0,68 | |
3 | 50 | 51 | 70 | mm/dev | 0,09–0,18 | 0,10–0,18 | 0,14–0,26 | 0,18–0,33 | ,020–0,40 | 0,22–0,48 | 0,26–0,59 | 0,28–0,66 | |
N | 1 | 100 | 210 | 410 | mm/dev | 0,09–0,15 | 0,10–0,20 | 0,18–0,33 | 0,20–0,38 | 0,25–0,43 | ,033–0,51 | 0,43–0,58 | 0,64–0,79 |
2 | 100 | 248 | 250 | mm/dev | 0,10–0,19 | 0,12–0,21 | 0,18–0,33 | 0,25–0,42 | 0,30–0,50 | 0,35–0,58 | 0,44–0,74 | 0,52–0,88 | |
4 | 60 | 173 | 250 | mm/dev | 0,08–0,15 | 0,13–0,18 | 0,18–0,33 | 0,20–0,36 | 0,23–0,38 | 0,33–0,46 | 0,38–0,48 | 0,58–0,76 | |
S | 4 | 30 | 20 | 51 | mm/dev | 0,03–0,05 | 0,04–0,07 | 0,07–0,09 | 0,09–0,12 | 0,11–0,15 | 0,13–0,18 | 0,17–0,24 | 0,22–0,30 |
Material | |||||||||||||
Material | Cutting Speed | Inch | |||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
S | 4 | 70 | 100 | 160 | IPR | – | – | .001–.003 | .001–.003 | .001–.003 | .003–.006 | .003–.006 | – |
Material | |||||||||||||
Cutting Speed | Metric | ||||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
S | 4 | 20 | 30 | 50 | mm/r | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |
Cutting Speed | Metric | ||||||||||||
Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
S | 4 | 20 | 30 | 50 | mm/dev | – | – | 0,03–0,08 | 0,03–0,08 | 0,03–0,08 | 0,08–0,15 | 0,08–0,15 | – |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use