Taladrado
Taladrado: Placas apiladasDownloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 7138109 |
| Referencia ISO | KSEM280ST130SFP25M |
| Referencia ANSI | KSEM280ST130SFP25M |
| Diámetro de broca M [D1] | 28 mm |
| Diámetro de broca M [D1] | 1.102 in |
| Diámetro de broca máximo [D1MAX] | 28 mm |
| Diámetro de broca máximo [D1MAX] | 1.102 in |
| Longitud total [L] | 198 mm |
| Longitud total [L] | 7.795 in |
| Longitud de calibre de plaquita [L1] | 130 mm |
| Longitud de calibre de plaquita [L1] | 5.118 in |
| Profundidad máxima de taladrado [L4] | 72.5 mm |
| Profundidad máxima de taladrado [L4] | 2.854 in |
| Longitud de mango [LS] | 56 mm |
| Longitud de mango [LS] | 2.204 in |
| Adaptador/Mango/Diá int [D] | 25 mm |
| Adaptador/Mango/Diá int [D] | .9843 in |
| Tamaño de asiento de la plaquita [SSC] | 6 |
TaladradoTaladrado: Placas apiladasCrear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Speed & Feed Rates • KSEM ST-LINE • HPG(M) Geometry • Grade KCPM45 • Through Coolant • METRIC | ||||||||||
| Material | Cutting Speed | Recommended Feed Rate by Diameter (mm/r) | ||||||||
| Min | Starting Value | Max | 12,5 | 16,0 | 20,0 | 25,4 | 32,0 | 40,0 | ||
| P | 0 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 |
| 1 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 2 | 70 | 100 | 120 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 3 | 60 | 75 | 100 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 4 | 55 | 75 | 95 | 0,12 – 0,31 | 0,14 – 0,34 | 0,16 – 0,40 | 0,20 – 0,51 | 0,23 – 0,58 | 0,26 – 0,66 | |
| 5 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| 6 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| M | 1 | 30 | 60 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 |
| 2 | 30 | 50 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| 3 | 20 | 40 | 60 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| Note: For MQL applications, reduce cutting speed by 30–40% | ||||||||||
| Speed & Feed Rates • KSEM ST-LINE • HPG(M) Geometry • Grade KCPM45 • Through Coolant • METRIC | ||||||||||
| Cutting Speed | Recommended Feed Rate by Diameter (mm/r) | |||||||||
| Material | Min | Starting Value | Max | 12,5 | 16,0 | 20,0 | 25,4 | 32,0 | 40,0 | |
| P | 0 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 |
| 1 | 75 | 110 | 140 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 2 | 70 | 100 | 120 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 3 | 60 | 75 | 100 | 0,15 – 0,31 | 0,17 – 0,36 | 0,19 – 0,41 | 0,25 – 0,53 | 0,29 – 0,60 | 0,33 – 0,69 | |
| 4 | 55 | 75 | 95 | 0,12 – 0,31 | 0,14 – 0,34 | 0,16 – 0,40 | 0,20 – 0,51 | 0,23 – 0,58 | 0,26 – 0,66 | |
| 5 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| 6 | 50 | 65 | 80 | 0,09 – 0,17 | 0,11 – 0,20 | 0,12 – 0,23 | 0,15 – 0,28 | 0,17 – 0,32 | 0,20 – 0,36 | |
| M | 1 | 30 | 60 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 |
| 2 | 30 | 50 | 90 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| 3 | 20 | 40 | 60 | 0,09 – 0,14 | 0,11 – 0,17 | 0,13 – 0,20 | 0,16 –0,25 | 0,18 – 0,28 | 0,21 – 0,31 | |
| Note: For MQL applications, reduce cutting speed by 30–40% | ||||||||||
| Speed & Feed Rates • KSEM ST-LINE • HPG(M) Geometry • Grade KCPM45 • Through Coolant • INCH | ||||||||||
| Cutting Speed | Recommended Feed Rate by Diameter (IPR) | |||||||||
| Material | Min | Starting Value | Max | 0.462 | 0.630 | 0.787 | 1.000 | 1.260 | 1.575 | |
| P | 0 | 250 | 360 | 460 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 |
| 1 | 250 | 360 | 460 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 | |
| 2 | 230 | 330 | 390 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 | |
| 3 | 200 | 250 | 330 | .006 – .012 | .007 – .014 | .007 – .016 | .010 – .021 | .011 – .024 | .013 – .027 | |
| 4 | 180 | 250 | 310 | .005 – .012 | .006 – .013 | .006 – .016 | .008 – .020 | .009 – .023 | .010 – .026 | |
| 5 | 160 | 210 | 260 | .004 – .007 | .004 – .008 | .005 – .009 | .006 – .011 | .007 – .013 | .008 – .014 | |
| 6 | 160 | 210 | 260 | .004 – .007 | .004 – .008 | .005 – .009 | .006 – .011 | .007 – .013 | .008 – .014 | |
| M | 1 | 100 | 200 | 300 | .004 – .006 | .004 – .007 | .005 – .008 | .006 – .010 | .007 – .011 | .008 – .012 |
| 2 | 100 | 160 | 300 | .004 – .006 | .004 – .007 | .005 – .008 | .006 – .010 | .007 – .011 | .008 – .012 | |
| 3 | 70 | 130 | 200 | .004 – .006 | .004 – .007 | .005 – .008 | .006 – .010 | .007 – .011 | .008 – .012 | |
| Note: For MQL applications, reduce cutting speed by 30–40% | ||||||||||
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?