Downloaded file will be available after import in the {{cadTool}} tool library.
| Número de material | 5063675 |
| Referencia ISO | RPET1204M0ELEJ |
| Referencia ANSI | RPET1204M0ELEJ |
| Calidad | KC522M |
| Tamaño IC de plaquita [D] | 12 mm |
| Tamaño IC de plaquita [D] | 0.472 in |
| Grosor de plaquita [S] | 4.76 mm |
| Grosor de plaquita [S] | 0.188 in |
| Grosor medio de las virutas [HM] | 0.051 mm |
| Grosor medio de las virutas [HM] | 0.002 in |
| Número de posiciones plaquita | 8 |
Grades
KC522M
Qualità in metallo duro rivestito AlTiN (PVD). KC522M è progettato per fornire le migliori prestazioni nella lavorazione generale di acciaio, acciaio inossidabile, ghisa e leghe resistenti al calore. KC522M resiste alla rottura, offre una migliore resistenza all’usura e una maggiore tenacità.
Crear una solución para calcular la velocidad y el avance
Después de crear una solución, sólo tiene que elegir el icono Avance y Velocidad y nuestro sistema le ofrecerá recomendaciones. Puede personalizar la información añadiendo su máquina y especificaciones o realizar ajustes utilizando los controles deslizantes.
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,17 | 0,47 | 0,75 | 0,12 | 0,34 | 0,54 | 0,09 | 0,26 | 0,40 | 0,08 | 0,22 | 0,35 | 0,07 | 0,20 | 0,32 | .E..LEJ |
| .E..LE | 0,17 | 0,47 | 0,75 | 0,12 | 0,34 | 0,54 | 0,09 | 0,26 | 0,40 | 0,08 | 0,22 | 0,35 | 0,07 | 0,20 | 0,32 | .E..LE |
| .S..GEJ | 0,23 | 0,53 | 0,82 | 0,17 | 0,38 | 0,59 | 0,13 | 0,29 | 0,44 | 0,11 | 0,25 | 0,39 | 0,10 | 0,23 | 0,35 | .S..GEJ |
| .S..GE | 0,23 | 0,53 | 0,82 | 0,17 | 0,38 | 0,59 | 0,13 | 0,29 | 0,44 | 0,11 | 0,25 | 0,39 | 0,10 | 0,23 | 0,35 | .S..GE |
| .S..GDX | 0,23 | 0,59 | 0,89 | 0,17 | 0,43 | 0,64 | 0,13 | 0,32 | 0,48 | 0,11 | 0,28 | 0,42 | 0,10 | 0,25 | 0,38 | .S..GDX |
| .S..GP | 0,23 | 0,59 | 0,89 | 0,17 | 0,43 | 0,64 | 0,13 | 0,32 | 0,48 | 0,11 | 0,28 | 0,42 | 0,10 | 0,25 | 0,38 | .S..GP |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,22 | 0,64 | 1,01 | 0,16 | 0,46 | 0,72 | 0,12 | 0,34 | 0,54 | 0,11 | 0,30 | 0,47 | 0,10 | 0,27 | 0,43 | .E..LEJ |
| .E..LE | 0,22 | 0,64 | 1,01 | 0,16 | 0,46 | 0,72 | 0,12 | 0,34 | 0,54 | 0,11 | 0,30 | 0,47 | 0,10 | 0,27 | 0,43 | .E..LE |
| .S..GEJ | 0,31 | 0,71 | 1,11 | 0,23 | 0,51 | 0,80 | 0,17 | 0,38 | 0,59 | 0,15 | 0,33 | 0,52 | 0,14 | 0,31 | 0,47 | .S..GEJ |
| .S..GE | 0,31 | 0,71 | 1,11 | 0,23 | 0,51 | 0,80 | 0,17 | 0,38 | 0,59 | 0,15 | 0,33 | 0,52 | 0,14 | 0,31 | 0,47 | .S..GE |
| .S..GDX | 0,31 | 0,79 | 1,20 | 0,23 | 0,57 | 0,86 | 0,17 | 0,43 | 0,64 | 0,15 | 0,37 | 0,56 | 0,14 | 0,34 | 0,51 | .S..GDX |
| .S..GP | 0,31 | 0,79 | 1,20 | 0,23 | 0,57 | 0,86 | 0,17 | 0,43 | 0,64 | 0,15 | 0,37 | 0,56 | 0,14 | 0,34 | 0,51 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,33 | 0,95 | 1,52 | 0,24 | 0,69 | 1,09 | 0,18 | 0,51 | 0,81 | 0,16 | 0,45 | 0,70 | 0,14 | 0,41 | 0,64 | .E..LEJ |
| .E..LE | 0,33 | 0,95 | 1,52 | 0,24 | 0,69 | 1,09 | 0,18 | 0,51 | 0,81 | 0,16 | 0,45 | 0,70 | 0,14 | 0,41 | 0,64 | .E..LE |
| .S..GEJ | 0,47 | 1,07 | 1,68 | 0,34 | 0,77 | 1,20 | 0,25 | 0,57 | 0,89 | 0,22 | 0,50 | 0,77 | 0,20 | 0,46 | 0,71 | .S..GEJ |
| .S..GE | 0,47 | 1,07 | 1,68 | 0,34 | 0,77 | 1,20 | 0,25 | 0,57 | 0,89 | 0,22 | 0,50 | 0,77 | 0,20 | 0,46 | 0,71 | .S..GE |
| .S..GDX | 0,47 | 1,19 | 1,81 | 0,34 | 0,86 | 1,29 | 0,25 | 0,64 | 0,96 | 0,22 | 0,56 | 0,83 | 0,20 | 0,51 | 0,76 | .S..GDX |
| .S..GP | 0,47 | 1,19 | 1,81 | 0,34 | 0,86 | 1,29 | 0,25 | 0,64 | 0,96 | 0,22 | 0,56 | 0,83 | 0,20 | 0,51 | 0,76 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,27 | 0,76 | 1,21 | 0,19 | 0,55 | 0,87 | 0,15 | 0,41 | 0,65 | 0,13 | 0,36 | 0,56 | 0,12 | 0,33 | 0,52 | .E..LEJ |
| .E..LE | 0,27 | 0,76 | 1,21 | 0,19 | 0,55 | 0,87 | 0,15 | 0,41 | 0,65 | 0,13 | 0,36 | 0,56 | 0,12 | 0,33 | 0,52 | .E..LE |
| .S..GEJ | 0,38 | 0,85 | 1,34 | 0,27 | 0,62 | 0,96 | 0,20 | 0,46 | 0,71 | 0,18 | 0,40 | 0,62 | 0,16 | 0,37 | 0,57 | .S..GEJ |
| .S..GE | 0,38 | 0,85 | 1,34 | 0,27 | 0,62 | 0,96 | 0,20 | 0,46 | 0,71 | 0,18 | 0,40 | 0,62 | 0,16 | 0,37 | 0,57 | .S..GE |
| .S..GDX | 0,38 | 0,95 | 1,44 | 0,27 | 0,69 | 1,03 | 0,20 | 0,51 | 0,77 | 0,18 | 0,45 | 0,67 | 0,16 | 0,41 | 0,61 | .S..GDX |
| .S..GP | 0,38 | 0,95 | 1,44 | 0,27 | 0,69 | 1,03 | 0,20 | 0,51 | 0,77 | 0,18 | 0,45 | 0,67 | 0,16 | 0,41 | 0,61 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,22 | 0,64 | 1,01 | 0,16 | 0,46 | 0,72 | 0,12 | 0,34 | 0,54 | 0,11 | 0,30 | 0,47 | 0,10 | 0,27 | 0,43 | .E..LEJ |
| .E..LE | 0,22 | 0,64 | 1,01 | 0,16 | 0,46 | 0,72 | 0,12 | 0,34 | 0,54 | 0,11 | 0,30 | 0,47 | 0,10 | 0,27 | 0,43 | .E..LE |
| .S..GEJ | 0,31 | 0,71 | 1,11 | 0,23 | 0,51 | 0,80 | 0,17 | 0,38 | 0,59 | 0,15 | 0,33 | 0,52 | 0,14 | 0,31 | 0,47 | .S..GEJ |
| .S..GE | 0,31 | 0,71 | 1,11 | 0,23 | 0,51 | 0,80 | 0,17 | 0,38 | 0,59 | 0,15 | 0,33 | 0,52 | 0,14 | 0,31 | 0,47 | .S..GE |
| .S..GDX | 0,31 | 0,79 | 1,20 | 0,23 | 0,57 | 0,86 | 0,17 | 0,43 | 0,64 | 0,15 | 0,37 | 0,56 | 0,14 | 0,34 | 0,51 | .S..GDX |
| .S..GP | 0,31 | 0,79 | 1,20 | 0,23 | 0,57 | 0,86 | 0,17 | 0,43 | 0,64 | 0,15 | 0,37 | 0,56 | 0,14 | 0,34 | 0,51 | .S..GP |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,33 | 0,95 | 1,52 | 0,24 | 0,69 | 1,09 | 0,18 | 0,51 | 0,81 | 0,16 | 0,45 | 0,70 | 0,14 | 0,41 | 0,64 | .E..LEJ |
| .E..LE | 0,33 | 0,95 | 1,52 | 0,24 | 0,69 | 1,09 | 0,18 | 0,51 | 0,81 | 0,16 | 0,45 | 0,70 | 0,14 | 0,41 | 0,64 | .E..LE |
| .S..GEJ | 0,47 | 1,07 | 1,68 | 0,34 | 0,77 | 1,20 | 0,25 | 0,57 | 0,89 | 0,22 | 0,50 | 0,77 | 0,20 | 0,46 | 0,71 | .S..GEJ |
| .S..GE | 0,47 | 1,07 | 1,68 | 0,34 | 0,77 | 1,20 | 0,25 | 0,57 | 0,89 | 0,22 | 0,50 | 0,77 | 0,20 | 0,46 | 0,71 | .S..GE |
| .S..GDX | 0,47 | 1,19 | 1,81 | 0,34 | 0,86 | 1,29 | 0,25 | 0,64 | 0,96 | 0,22 | 0,56 | 0,83 | 0,20 | 0,51 | 0,76 | .S..GDX |
| .S..GP | 0,47 | 1,19 | 1,81 | 0,34 | 0,86 | 1,29 | 0,25 | 0,64 | 0,96 | 0,22 | 0,56 | 0,83 | 0,20 | 0,51 | 0,76 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,27 | 0,76 | 1,21 | 0,19 | 0,55 | 0,87 | 0,15 | 0,41 | 0,65 | 0,13 | 0,36 | 0,56 | 0,12 | 0,33 | 0,52 | .E..LEJ |
| .E..LE | 0,27 | 0,76 | 1,21 | 0,19 | 0,55 | 0,87 | 0,15 | 0,41 | 0,65 | 0,13 | 0,36 | 0,56 | 0,12 | 0,33 | 0,52 | .E..LE |
| .S..GEJ | 0,38 | 0,85 | 1,34 | 0,27 | 0,62 | 0,96 | 0,20 | 0,46 | 0,71 | 0,18 | 0,40 | 0,62 | 0,16 | 0,37 | 0,57 | .S..GEJ |
| .S..GE | 0,38 | 0,85 | 1,34 | 0,27 | 0,62 | 0,96 | 0,20 | 0,46 | 0,71 | 0,18 | 0,40 | 0,62 | 0,16 | 0,37 | 0,57 | .S..GE |
| .S..GDX | 0,38 | 0,95 | 1,44 | 0,27 | 0,69 | 1,03 | 0,20 | 0,51 | 0,77 | 0,18 | 0,45 | 0,67 | 0,16 | 0,41 | 0,61 | .S..GDX |
| .S..GP | 0,38 | 0,95 | 1,44 | 0,27 | 0,69 | 1,03 | 0,20 | 0,51 | 0,77 | 0,18 | 0,45 | 0,67 | 0,16 | 0,41 | 0,61 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 30% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | 0,17 | 0,47 | 0,75 | 0,12 | 0,34 | 0,54 | 0,09 | 0,26 | 0,40 | 0,08 | 0,22 | 0,35 | 0,07 | 0,20 | 0,32 | .E..LEJ |
| .E..LE | 0,17 | 0,47 | 0,75 | 0,12 | 0,34 | 0,54 | 0,09 | 0,26 | 0,40 | 0,08 | 0,22 | 0,35 | 0,07 | 0,20 | 0,32 | .E..LE |
| .S..GEJ | 0,23 | 0,53 | 0,82 | 0,17 | 0,38 | 0,59 | 0,13 | 0,29 | 0,44 | 0,11 | 0,25 | 0,39 | 0,10 | 0,23 | 0,35 | .S..GEJ |
| .S..GE | 0,23 | 0,53 | 0,82 | 0,17 | 0,38 | 0,59 | 0,13 | 0,29 | 0,44 | 0,11 | 0,25 | 0,39 | 0,10 | 0,23 | 0,35 | .S..GE |
| .S..GDX | 0,23 | 0,59 | 0,89 | 0,17 | 0,43 | 0,64 | 0,13 | 0,32 | 0,48 | 0,11 | 0,28 | 0,42 | 0,10 | 0,25 | 0,38 | .S..GDX |
| .S..GP | 0,23 | 0,59 | 0,89 | 0,17 | 0,43 | 0,64 | 0,13 | 0,32 | 0,48 | 0,11 | 0,28 | 0,42 | 0,10 | 0,25 | 0,38 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .003 | .005 | .007 | .002 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | .E..LEJ |
| .E..LE | .005 | .010 | .020 | .004 | .008 | .015 | .003 | .007 | .013 | .003 | .006 | .012 | .003 | .006 | .012 | .E..LE |
| .S..GEJ | .007 | .014 | .024 | .005 | .010 | .018 | .004 | .009 | .016 | .004 | .008 | .014 | .004 | .008 | .014 | .S..GEJ |
| .S..GE | .007 | .014 | .024 | .005 | .010 | .018 | .004 | .009 | .015 | .004 | .008 | .014 | .004 | .008 | .014 | .S..GE |
| .S..GDX | .007 | .017 | .030 | .005 | .012 | .022 | .004 | .011 | .019 | .004 | .010 | .018 | .004 | .010 | .018 | .S..GDX |
| .S..GP | .007 | .017 | .031 | .005 | .012 | .023 | .004 | .011 | .020 | .004 | .010 | .018 | .004 | .010 | .018 | .S..GP |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .004 | .006 | .008 | .003 | .004 | .006 | .002 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .005 | .E..LEJ |
| .E..LE | .005 | .012 | .024 | .004 | .009 | .017 | .004 | .008 | .015 | .003 | .007 | .014 | .003 | .007 | .014 | .E..LE |
| .S..GEJ | .008 | .016 | .028 | .006 | .012 | .021 | .005 | .010 | .018 | .005 | .010 | .017 | .005 | .009 | .016 | .S..GEJ |
| .S..GE | .008 | .016 | .028 | .006 | .012 | .020 | .005 | .010 | .018 | .005 | .009 | .017 | .005 | .009 | .016 | .S..GE |
| .S..GDX | .008 | .019 | .035 | .006 | .014 | .026 | .005 | .012 | .022 | .005 | .012 | .021 | .005 | .011 | .020 | .S..GDX |
| .S..GP | .008 | .019 | .036 | .006 | .014 | .026 | .005 | .012 | .023 | .005 | .012 | .021 | .005 | .011 | .021 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .007 | .010 | .015 | .005 | .007 | .011 | .004 | .006 | .009 | .004 | .006 | .009 | .004 | .006 | .009 | .E..LEJ |
| .E..LE | .010 | .021 | .043 | .007 | .016 | .031 | .006 | .014 | .027 | .006 | .013 | .025 | .006 | .012 | .025 | .E..LE |
| .S..GEJ | .014 | .029 | .052 | .010 | .021 | .037 | .009 | .018 | .032 | .008 | .017 | .030 | .008 | .017 | .029 | .S..GEJ |
| .S..GE | .014 | .028 | .051 | .010 | .021 | .037 | .009 | .018 | .032 | .008 | .017 | .030 | .008 | .017 | .029 | .S..GE |
| .S..GDX | .014 | .035 | .065 | .010 | .026 | .046 | .009 | .022 | .040 | .008 | .021 | .037 | .008 | .020 | .036 | .S..GDX |
| .S..GP | .014 | .035 | .067 | .010 | .026 | .048 | .009 | .022 | .041 | .008 | .021 | .038 | .008 | .020 | .037 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .005 | .007 | .003 | .004 | .006 | .003 | .004 | .006 | .E..LEJ |
| .E..LE | .007 | .015 | .031 | .005 | .011 | .023 | .005 | .010 | .020 | .004 | .009 | .019 | .004 | .009 | .018 | .E..LE |
| .S..GEJ | .010 | .021 | .037 | .007 | .015 | .027 | .007 | .013 | .023 | .006 | .013 | .022 | .006 | .012 | .021 | .S..GEJ |
| .S..GE | .010 | .021 | .037 | .007 | .015 | .027 | .007 | .013 | .023 | .006 | .012 | .022 | .006 | .012 | .021 | .S..GE |
| .S..GDX | .010 | .026 | .047 | .007 | .019 | .034 | .007 | .016 | .029 | .006 | .015 | .027 | .006 | .015 | .026 | .S..GDX |
| .S..GP | .010 | .026 | .048 | .007 | .019 | .035 | .007 | .016 | .030 | .006 | .015 | .028 | .006 | .015 | .027 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | .009 | .025 | .040 | .006 | .018 | .028 | .005 | .013 | .021 | .004 | .012 | .018 | .004 | .011 | .017 | .E..LEJ |
| .E..LE | .009 | .025 | .040 | .006 | .018 | .028 | .005 | .013 | .021 | .004 | .012 | .018 | .004 | .011 | .017 | .E..LE |
| .S..GEJ | .012 | .028 | .044 | .009 | .020 | .031 | .007 | .015 | .023 | .006 | .013 | .020 | .005 | .012 | .019 | .S..GEJ |
| .S..GE | .012 | .028 | .044 | .009 | .020 | .031 | .007 | .015 | .023 | .006 | .013 | .020 | .005 | .012 | .019 | .S..GE |
| .S..GDX | .012 | .031 | .048 | .009 | .022 | .034 | .007 | .017 | .025 | .006 | .015 | .022 | .005 | .013 | .020 | .S..GDX |
| .S..GP | .012 | .031 | .048 | .009 | .022 | .034 | .007 | .017 | .025 | .006 | .015 | .022 | .005 | .013 | .020 | .S..GP |
| Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | .013 | .039 | .062 | .010 | .028 | .044 | .007 | .021 | .032 | .006 | .018 | .028 | .006 | .016 | .026 | .E..LEJ |
| .E..LE | .013 | .039 | .062 | .010 | .028 | .044 | .007 | .021 | .032 | .006 | .018 | .028 | .006 | .016 | .026 | .E..LE |
| .S..GEJ | .019 | .044 | .069 | .014 | .031 | .049 | .010 | .023 | .036 | .009 | .020 | .031 | .008 | .018 | .029 | .S..GEJ |
| .S..GE | .019 | .044 | .069 | .014 | .031 | .049 | .010 | .023 | .036 | .009 | .020 | .031 | .008 | .018 | .029 | .S..GE |
| .S..GDX | .019 | .049 | .075 | .014 | .035 | .052 | .010 | .026 | .039 | .009 | .022 | .034 | .008 | .021 | .031 | .S..GDX |
| .S..GP | .019 | .049 | .075 | .014 | .035 | .052 | .010 | .026 | .039 | .009 | .022 | .034 | .008 | .021 | .031 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | .011 | .031 | .049 | .008 | .022 | .035 | .006 | .016 | .026 | .005 | .014 | .022 | .005 | .013 | .020 | .E..LEJ |
| .E..LE | .011 | .031 | .049 | .008 | .022 | .035 | .006 | .016 | .026 | .005 | .014 | .022 | .005 | .013 | .020 | .E..LE |
| .S..GEJ | .015 | .034 | .054 | .011 | .025 | .038 | .008 | .018 | .028 | .007 | .016 | .025 | .007 | .015 | .023 | .S..GEJ |
| .S..GE | .015 | .034 | .054 | .011 | .025 | .038 | .008 | .018 | .028 | .007 | .016 | .025 | .007 | .015 | .023 | .S..GE |
| .S..GDX | .015 | .038 | .059 | .011 | .027 | .041 | .008 | .020 | .031 | .007 | .018 | .027 | .007 | .016 | .024 | .S..GDX |
| .S..GP | .015 | .038 | .059 | .011 | .027 | .041 | .008 | .020 | .031 | .007 | .018 | .027 | .007 | .016 | .024 | .S..GP |
| Geometría de plaquita | Avance inicial recomendado por diente (Fz) en relación con % de contacto radial (ae) | Geometría de plaquita | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .E..LEJ | .007 | .019 | .030 | .005 | .013 | .021 | .004 | .010 | .016 | .003 | .009 | .014 | .003 | .008 | .013 | .E..LEJ |
| .E..LE | .007 | .019 | .030 | .005 | .013 | .021 | .004 | .010 | .016 | .003 | .009 | .014 | .003 | .008 | .013 | .E..LE |
| .S..GEJ | .009 | .021 | .033 | .007 | .015 | .023 | .005 | .011 | .017 | .004 | .010 | .015 | .004 | .009 | .014 | .S..GEJ |
| .S..GE | .009 | .021 | .033 | .007 | .015 | .023 | .005 | .011 | .017 | .004 | .010 | .015 | .004 | .009 | .014 | .S..GE |
| .S..GDX | .009 | .023 | .035 | .007 | .017 | .025 | .005 | .013 | .019 | .004 | .011 | .016 | .004 | .010 | .015 | .S..GDX |
| .S..GP | .009 | .023 | .035 | .007 | .017 | .025 | .005 | .013 | .019 | .004 | .011 | .016 | .004 | .010 | .015 | .S..GP |
| Grupo de materiales | KC422M | KC522M | KC725M | KCPM20 | KCMP30 | KCPK30 | |||||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 545 | 475 | 440 | 545 | 475 | 440 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 335 | 305 | 275 | 335 | 305 | 275 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 305 | 275 | 250 | 305 | 275 | 250 | |
| 4 | – | – | – | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 225 | 210 | 190 | 225 | 210 | 190 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 310 | 275 | 255 | 310 | 275 | 255 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 190 | 165 | - | 190 | 165 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 250 | 220 | 190 | 250 | 220 | 190 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 225 | 195 | 170 | 225 | 195 | 170 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 175 | 160 | 140 | 175 | 160 | 140 | |
| K | 1 | – | – | – | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | – | – | – | 355 | 320 | 285 |
| 2 | – | – | – | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | – | – | – | 280 | 255 | 230 | |
| 3 | – | – | – | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | – | – | – | 235 | 210 | 195 | |
| N | 1–2 | 1285 | 1135 | 1050 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1135 | 1050 | 915 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | 45 | 35 | 30 | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | 45 | 35 | 30 | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | 55 | 45 | 30 | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | 75 | 55 | 35 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC422M | KC522M | KC725M | KCPM20 | KCMP30 | KCPK30 | |||||||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 315 | 275 | 255 | 660 | 580 | 535 | 545 | 475 | 440 | 545 | 475 | 440 |
| 2 | – | – | – | 330 | 290 | 240 | 260 | 230 | 195 | 410 | 370 | 330 | 335 | 305 | 275 | 335 | 305 | 275 | |
| 3 | – | – | – | 305 | 255 | 215 | 240 | 205 | 170 | 370 | 330 | 305 | 305 | 275 | 250 | 305 | 275 | 250 | |
| 4 | – | – | – | 270 | 225 | 180 | 215 | 180 | 145 | 275 | 255 | 230 | 225 | 210 | 190 | 225 | 210 | 190 | |
| 5 | – | – | – | 225 | 200 | 180 | 180 | 160 | 145 | 330 | 300 | 275 | 310 | 275 | 255 | 310 | 275 | 255 | |
| 6 | – | – | – | 200 | 150 | 120 | 160 | 120 | 95 | 230 | 200 | 175 | 190 | 165 | - | 190 | 165 | – | |
| M | 1 | – | – | – | 245 | 215 | 200 | 205 | 180 | 165 | 270 | 240 | 205 | 250 | 220 | 190 | 250 | 220 | 190 |
| 2 | – | – | – | 225 | 190 | 160 | 185 | 160 | 130 | 245 | 215 | 190 | 225 | 195 | 170 | 225 | 195 | 170 | |
| 3 | – | – | – | 170 | 145 | 115 | 140 | 120 | 95 | 195 | 175 | 150 | 175 | 160 | 140 | 175 | 160 | 140 | |
| K | 1 | – | – | – | 275 | 250 | 220 | – | – | – | 435 | 390 | 350 | – | – | – | 355 | 320 | 285 |
| 2 | – | – | – | 215 | 195 | 180 | – | – | – | 345 | 310 | 280 | – | – | – | 280 | 255 | 230 | |
| 3 | – | – | – | 180 | 160 | 145 | – | – | – | 290 | 255 | 240 | – | – | – | 235 | 210 | 195 | |
| N | 1–2 | 1285 | 1135 | 1050 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1135 | 1050 | 915 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | 45 | 35 | 30 | – | – | – |
| 2 | – | – | – | 50 | 45 | 35 | 45 | 35 | 30 | – | – | – | 45 | 35 | 30 | – | – | – | |
| 3 | – | – | – | 60 | 50 | 35 | 55 | 45 | 30 | – | – | – | 55 | 45 | 30 | – | – | – | |
| 4 | – | – | – | 85 | 60 | 45 | 75 | 55 | 35 | – | – | – | 75 | 55 | 35 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Grupo de materiales | KC422M | KC522M | KC725M | KCPM20 | KCMP30 | KCPK30 | |||||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – | – | – | – |
| Grupo de materiales | KC422M | KC522M | KC725M | KCPM20 | KCMP30 | KCPK30 | |||||||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1210 | 1090 | 1000 | 1000 | 900 | 820 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 910 | 840 | 760 | 740 | 690 | 620 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1090 | 980 | 900 | 1020 | 910 | 830 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 760 | 660 | 570 | 620 | 540 | – | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 880 | 790 | 680 | 820 | 720 | 620 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 800 | 700 | 620 | 730 | 640 | 550 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 640 | 570 | 490 | 570 | 520 | 460 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 900 | 820 | 720 | – | – | – | 1420 | 1280 | 1150 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 710 | 640 | 590 | – | – | – | 1130 | 1010 | 920 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 590 | 530 | 480 | – | – | – | 950 | 840 | 780 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 470 | 360 | 280 | – | – | – | 550 | 460 | 370 | – | – | – | – | – | – |
| número de catálogo | máx. ángulo rampa | máx. profundidad de vaciado | mín. diámetro agujero (DH mín.) | mín. diámetro de agujero con fondo plano (DHI mín.) | máx. diámetro agujero (fondo plano) |
| 32E03R045M16RP12 | 6.0° | 1,65 | 43,95 | 52 | 64 |
| 40E04R045M16RP12 | 9.0° | 3,50 | 57,24 | 68 | 80 |
| 32A03R040B32RP12 | 6.0° | 1,65 | 43,95 | 52 | 64 |
| 32A03R040A32RP12L190 | 6.0° | 1,65 | 43,95 | 52 | 64 |
| 40A04RS90RP12 | 9.0° | 3,50 | 57,24 | 68 | 80 |
| 42A04RS90RP12 | 9.6° | 4,20 | 60,68 | 72 | 84 |
| 50A04RS90RP12 | 10.8° | 6,00 | 76,04 | 88 | 100 |
| 50A05RS90RP12 | 7.9° | 4,40 | 76,50 | 88 | 100 |
| 52A05RS90RP12 | 10.2° | 6,00 | 80,05 | 92 | 104 |
| 63A05RS90RP12 | 7.7° | 6,00 | 102,02 | 114 | 126 |
| 63A07RS90RP12 | 2.6° | 2,10 | 105,08 | 114 | 126 |
| 66A06RS90RP12 | 6.6° | 5,50 | 108,14 | 120 | 132 |
| 80A06RS90RP12 | 5.1° | 5,50 | 136,04 | 148 | 160 |
| 80A08RS90RP12 | 4.1° | 4,40 | 136,58 | 148 | 160 |
| 100B07RS90RP12 | 4.0° | 5,70 | 176,04 | 188 | 200 |
| 100B09RS90RP12 | 3.1° | 4,40 | 176,55 | 188 | 200 |
| número de catálogo | máx. ángulo rampa | máx. profundidad de vaciado | mín. diámetro agujero (DH mín.) | máx. diámetro agujero fondo plano (DH1 máx.) | máx diámetro (fondo no plano) |
| BMD125R1203M16L150 | 5.7° | 0.061 | 1.719 | 2.028 | 2.5 |
| BMD150R1204M16L150 | 9.2° | 0.130 | 2.112 | 2.528 | 3.0 |
| BMD125R1203W125L200 | 5.7° | 0.061 | 1.719 | 2.028 | 2.5 |
| BMD150R1204W150L200 | 9.2° | 0.130 | 2.112 | 2.528 | 3.0 |
| BMD125R1203C125L700 | 5.7° | 0.061 | 1.719 | 2.028 | 2.5 |
| BMD150R1203C125L800 | 9.8° | 0.138 | 2.104 | 2.528 | 3.0 |
| BMD150R1204S050L158 | 9.2° | 0.130 | 2.112 | 2.528 | 3.0 |
| BMD200R1203S075L200 | 10.5° | 0.236 | 3.058 | 3.528 | 4.0 |
| BMD200R1205S075L200 | 7.7° | 0.173 | 3.074 | 3.528 | 4.0 |
| BMD250R1207S100L200 | 4.1° | 0.130 | 4.114 | 4.528 | 5.0 |
| BMD300R1206S100L200 | 5.7° | 0.228 | 5.048 | 5.528 | 6.0 |
| BMD300R1208S100L200 | 3.5° | 0.138 | 5.078 | 5.528 | 6.0 |
| BMD400R1207S125L200 | 3.3° | 0.189 | 7.068 | 7.528 | 8.0 |
| BMD400R1209S125L200 | 3.0° | 0.173 | 7.525 | 7.528 | 8.0 |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| – | (Geometría ligera) | – | (Geometría fuerte) | |||
| – | resistencia |  | tenacidad | |||
| – | Geometría | Calidad | Geometría | Calidad | Geometría | Calidad |
| P1–P2 | .S..GE | KCPK30 | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| P3–P4 | .S..GE | KCPK30 | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| P5–P6 | .S..GEJ | KC725M | .S..GDX | KC725M | .S..GP | KC725M |
| M1–M2 | .E..LEJ | KC725M | .S..GDX | KC725M | .S..GP | KC725M |
| M3 | .S..GE | KCPK30 | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| K1–K2 | – | – | – | – | – | – |
| K3 | .E..LE | KCPK30 | .S..GE | KCPK30 | .S..GP | KCPK30 |
| N1–N2 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| N3 | – | – | – | – | – | – |
| S1–S2 | .S..GEJ | KC725M | .S..GDX | KC725M | .S..GP | KC725M |
| S3 | .S..GEJ | KC725M | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| S4 | .S..GEJ | KC522M | .S..GDX | KC725M | .S..GP | KC725M |
| H1 | – | – | – | – | – | – |
| Grupo de materiales | Mecanizado ligero | Aplicaciones generales | Mecanizado intensivo | |||
| (Geometría ligera) | (Geometría fuerte) | |||||
| resistencia | | tenacidad | ||||
| Geometría | Calidad | Geometría | Calidad | Geometría | Calidad | |
| P1–P2 | .S..GE | KCPK30 | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| P3–P4 | .S..GE | KCPK30 | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| P5–P6 | .S..GEJ | KC725M | .S..GDX | KC725M | .S..GP | KC725M |
| M1–M2 | .E..LEJ | KC725M | .S..GDX | KC725M | .S..GP | KC725M |
| M3 | .S..GE | KCPK30 | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| K1–K2 | – | – | – | – | – | – |
| K3 | .E..LE | KCPK30 | .S..GE | KCPK30 | .S..GP | KCPK30 |
| N1–N2 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| N3 | – | – | – | – | – | – |
| S1–S2 | .S..GEJ | KC725M | .S..GDX | KC725M | .S..GP | KC725M |
| S3 | .S..GEJ | KC725M | .S..GDX | KCPM40 | .S..GP | KCPM40 |
| S4 | .S..GEJ | KC522M | .S..GDX | KC725M | .S..GP | KC725M |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO catálogo
ANSI catálogo
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO catálogo | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?