KM40TS™ Adapters
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
- N6Carbon, Graphite Composites, CFRP (3)
- N7MMC's (3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (3)
- H1Hardened Materials 44-48 HRC(3)
- H2Hardened Materials 48-55 HRC(3)
- H3Hardened Materials 56-60 HRC(3)
- H4Hardened Materials >60 HRC(3)
Applications
Applications
Convex Drilling (3)
Drilling (3)
Inclined Entry Drilling (3)
Inclined Exit Drilling (3)
X-Offset Drilling (3)
Cutting Diameter
Cutting Diameter
- 1.063 in(1)
- 1.143 in(1)
- 1.22 in(1)
to
Cutting Diameter
Cutting Diameter
- 27.0 mm(1)
- 29.0 mm(1)
- 31.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 81.0 mm(1)
- 87.0 mm(1)
- 93.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 3.189 in(1)
- 3.426 in(1)
- 3.661 in(1)
to
Reach
Reach
- 3.781 in(1)
- 4.055 in(1)
- 4.331 in(1)
to
Reach
Reach
- 96.0 mm(1)
- 103.0 mm(1)
- 110.0 mm(1)
to
Connection Style
Connection Style
- KM (3)
Number of Flutes
Number of Flutes
- 2 (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (3)
- 3.0 (3)
to
Over All Length [L]
Over All Length [L]
- 5.944 in(1)
- 6.219 in(1)
- 6.494 in(1)
to
Over All Length [L]
Over All Length [L]
- 150.951 mm(1)
- 157.951 mm(1)
- 164.951 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (3)
- KC7140 (3)
- KC720 (3)
- KC7215 (3)
- KC7225 (3)
- KC7815 (3)
- KC7820 (3)
- KC7935 (3)
- KC810 (3)
- KC990 (3)
- KCMS35 (3)
- KCPK10 (3)
- KCU25 (3)
- KCU40 (3)
- KD1425 (3)
- KMF (3)
- KU40D (3)
Hand Of Tool
Hand Of Tool
- R (3)
Drill Type
Drill Type
- 86-01 (3)
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (16)
- COMBI SHELL ADAPTER (2)
- DRILL CHUCK ADAPTER (1)
- END MILL ADAPTER (10)
- ER COLLET CHUCK (3)
- EXTENSION (2)
- HYDRAULIC CHUCK (5)
- KM MODULAR ADAPTER (1)
- REDUCER (1)
- SHELL MILL ADAPTER (8)
- TAP CHUCK ADAPTER (2)
- WHISTLE NOTCH ADAPTER (8)
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (10)
- KMT - KM Adapter (3)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (3)
- ZYL - Cylindrical Adapter (41)
Insert Shape
Insert Shape
- X-TRIGON 84 (3)
Front End Style
Front End Style
- FDA12 Transv Drive&CutRetScr (1)
- FDA22 Transv Drive & SHCS (7)
- FDA23 Longit&Transv Drv&SHCS (2)
- KMT00 All KM, except 02,05,09 (3)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (3)
- ZYL01 Straight Shank (7)
- ZYL10 Weldon Shank (10)
- ZYL13 2Deg-Whistle Notch (8)
- ZYL22 Boring Bar Shank (16)
Gage Length
Gage Length
- 3 in(1)
- 1.024 in(4)
- 1.102 in(1)
- 1.26 in(3)
- 1.417 in(1)
- 1.496 in(2)
- 1.575 in(1)
- 1.772 in(3)
- 1.774 in(1)
- 1.969 in(4)
- 2.165 in(2)
- 2.362 in(6)
- 2.559 in(8)
- 2.757 in(5)
- 2.758 in(1)
- 2.953 in(5)
- 3.15 in(5)
- 3.346 in(2)
- 3.543 in(2)
- 3.74 in(1)
- 3.934 in(1)
Gage Length
Gage Length
- 65 mm(8)
- 60 mm(6)
- 70 mm(5)
- 75 mm(5)
- 80 mm(5)
- 26 mm(4)
- 50 mm(4)
- 32 mm(3)
- 45 mm(3)
- 38 mm(2)
- 55 mm(2)
- 85 mm(2)
- 90 mm(2)
- 28 mm(1)
- 36 mm(1)
- 40 mm(1)
- 95 mm(1)
- 45.051 mm(1)
- 70.05 mm(1)
- 76.2 mm(1)
- 99.9 mm(1)
Front End Size
Front End Size
- 0.039 in(1)
- 0.237 in(4)
- 0.315 in(4)
- 0.375 in(2)
- 0.394 in(4)
- 0.473 in(4)
- 0.5 in(4)
- 0.551 in(1)
- 0.625 in(2)
- 0.63 in(5)
- 0.709 in(1)
- 0.749 in(1)
- 0.75 in(5)
- 0.787 in(3)
- 0.866 in(2)
- 0.984 in(1)
- 1.0 in(3)
- 1.063 in(1)
- 1.221 in(1)
- 1.25 in(1)
- 1.26 in(2)
- 1.5 in(1)
- 1.575 in(3)
to
Front End Size
Front End Size
- 1.0 mm(1)
- 6.0 mm(4)
- 8.0 mm(4)
- 9.525 mm(2)
- 10.0 mm(4)
- 12.0 mm(4)
- 12.701 mm(4)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(5)
- 18.0 mm(1)
- 19.026 mm(1)
- 19.05 mm(5)
- 20.0 mm(3)
- 22.0 mm(2)
- 25.0 mm(1)
- 25.401 mm(3)
- 27.0 mm(1)
- 31.026 mm(1)
- 31.75 mm(1)
- 32.0 mm(2)
- 38.1 mm(1)
- 40.0 mm(3)
to
Back-End
Connection Type
Connection Type
- TAPER SHANK (3)
System Size
System Size
- KM40TS (62)
Back-End Diameter
Back-End Diameter
- 40.0 mm(62)
to
Back-End Diameter
Back-End Diameter
- 1.575 in(62)
to
No filters matching ""
