Tech Tip: 45° vs 90° Face Milling – Kennametal

Advantages and Disadvantages of Using a 45-degree Face Mill vs. a 90-degree Face Mill

To achieve greater productivity and problem-free milling, use a lead angle cutter whenever possible. Chip thickness is affected by the lead angle. The greater the lead angle, the greater the chip-thinning effect.

Lead Angle Thickness

Feed Per Tooth

Actual Chip

0AA
45A.707 x A
0.010".010"
45.010".070" x .010" = 0071"

Advantages

  • Well-balanced axial and radial cutting forces.
  • Less breakout on workpiece corner.
  • Entry shock is minimized.
  • Less radial forces directed into the spindle bearings.
  • Higher feed rates possible.
  • Reduces chatter.

Disadvantages

  • Reduced maximum depth of cut due to lead angle.
  • Larger body diameter can cause fixture clearance problems.
  • No 90-degree corner milling.
  • Can cause chipping or burring on exit side of cutter rotation.
You are about to add to your My Solutions page. Do you want to proceed?
Select the destination where you want to move to.
New Folder
    • Applied Filters:
    • Clear All

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

Product data

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material NumberISO Catalog NumberGrade  

You are about to leave the Solution building process.

Are you sure you want to leave?