欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

项目 已成功添加到购物车
查看购物车
Exit Search 回到解决方案

编辑解决方案

添加解决方案

解决方案名称:{{SolutionName}}

    产品类似于:

    返回到 | 修改类似于

    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制

    模块化钻孔 • 直柄 (SS)

    物料号100109841

    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    Open expanded view
    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    KenTIP™ FS • 钻体 • 1,5 x D • SS 刀柄 • 公制
    通用表示形式
    请联系我们的销售人员来了解您的定价。

    Features and benefits

    • 大容屑空间、高抛的排屑槽可确保排屑顺畅，从而延长刀具寿命，改善刀具性能。
    • 冷却液可输送至钻尖部位和前角面部位，确保冷却液可输送至所需要的区域。
    • 每一个钻体都配有一个 KenTIP FS 智能扳手。可更轻松更换机床内的刀片，减少闲置时间，节省成本。
    • DrillingDrilling
    • Drilling: Stacked PlatesDrilling: Stacked Plates
    • 钻孔 — 贯通式冷却钻孔 — 贯通式冷却
    • 刀柄— 圆柱 平面度 ≤h6刀柄— 圆柱 平面度 ≤h6
    公差 • 公制
    D1 公制公差 k8
    60,000/+0,018
    6–100,000/+0,022
    10–180,000/+0,027
    18–260,000/+0,033
    公差 • 英制
    D1 英制公差 k8
    0.23620.0000/+0.0007
    0.2362–0.39370.0000/+0.0009
    0.3937–0.70870.0000/+0.0011
    0.7087–1.02360.0000/+0.0013
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值.236.315.394.472.551.630.787.9451.023
    P0315415575英寸/转.004 .007.004 .009.005 .012.006 .015.007 .016.007 .018.009 .020.011 .023.011 .024
    1300430560英寸/转.004 .007.004 .009.005 .012.006 .015.007 .016.007 .018.009 .020.011 .023.011 .024
    2330460590英寸/转.004 .009.004 .010.005 .013.006 .016.007 .018.007 .019.009 .022.011 .025.011 .026
    3200330430英寸/转.004 .011.004 .012.005 .014.006 .016.006 .017.007 .018.009 .020.012 .022.012 .023
    4200330430英寸/转.004 .011.004 .012.005 .014.006 .016.006 .017.007 .018.009 .020.010 .022.010 .023
    5200260330英寸/转.004 .007.004 .009.004 .011.005 .013.006 .015.006 .016.008 .018.009 .020.010 .021
    6200230260英寸/转.004 .007.004 .009.004 .011.005 .013.006 .015.006 .016.008 .018.009 .020.010 .021
    K1260400560英寸/转.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    2260360390英寸/转.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    3160260330英寸/转.004 .009.005 .010.005 .013.006 .014.007 .016.008 .018.011 .021.013 .025.013 .026
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    P095125175毫米/转0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    190130170毫米/转0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    2100140180毫米/转0,10 0,190,11 0,260,13 0,340,15 0,410,17 0,450,19 0,490,24 0,560,28 0,640,29 0,62
    360100130毫米/转0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,30 0,560,31 0,58
    460100130毫米/转0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,25 0,560,26 0,58
    56080100毫米/转0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    6607080毫米/转0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    K180120170毫米/转0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    280110120毫米/转0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    35080100毫米/转0,11 0,190,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    P095125175mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    190130170mm/r0,10 0,190,11 0,220,13 0,300,15 0,370,17 0,410,19 0,450,24 0,520,28 0,600,29 0,62
    2100140180mm/r0,10 0,190,11 0,260,13 0,340,15 0,410,17 0,450,19 0,490,24 0,560,28 0,640,29 0,62
    360100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,30 0,560,31 0,58
    460100130mm/r0,10 0,170,11 0,310,12 0,360,14 0,410,16 0,440,18 0,460,23 0,510,25 0,560,26 0,58
    56080100mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    6607080mm/r0,09 0,160,10 0,220,11 0,280,12 0,340,14 0,370,16 0,400,20 0,460,24 0,520,25 0,54
    K180120170mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    280110120mm/r0,12 0,210,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    35080100mm/r0,11 0,190,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    M1506090毫米/转0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    2306090毫米/转0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    3205060毫米/转0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值.236.315.394.472.551.630.787.9451.023
    M1160200300英寸/转.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    2100200300英寸/转.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    370160200英寸/转.003 .005.003 .006.004 .007.004 .008.005 .009.005 .009.006 .011.007 .013.008 .013
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    M1506090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    2306090mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    3205060mm/r0,07 0,130,08 0,150,09 0,180,11 0,200,12 0,220,13 0,240,16 0,280,19 0,320,20 0,33
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    K1100175200毫米/转0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    2100160180毫米/转0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    37085120毫米/转0,11 0,230,13 0,270,15 0,330,17 0,370,19 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值.236.315.394.472.551.630.787.9451.023
    K1330570660英寸/转.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    2330520590英寸/转.005 .011.005 .013.006 .015.007 .017.009 .019.010 .022.012 .025.014 .030.015 .031
    3230280390英寸/转.004 .009.005 .010.005 .013.006 .014.007 .016.008 .018.011 .021.013 .025.013 .026
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    K1100175200mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    2100160180mm/r0,12 0,290,14 0,340,16 0,390,19 0,450,23 0,500,26 0,580,30 0,640,36 0,760,37 0,79
    37085120mm/r0,11 0,230,13 0,270,15 0,330,17 0,370,19 – 0,420,21 0,460,28 0,540,32 0,630,33 0,66
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,016,020,0
    S4101320毫米/转0,02–0,080,03–0,100,04–0,120,05–0,160,05–0,180,06–0,20
    N1100230270毫米/转0,13–0,220,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    2100220270毫米/转0,14–0,230,16–0,280,20–0,320,24–0,360,28–0,400,32–0,52
    390180230毫米/转0,13–0,220,16–0,240,20–0,280,24–0,320,28–0,400,32–0,48
    490130200毫米/转0,10–0,180,16–0,280,20–0,320,24–0,360,28–0,400,32–0,52
    C270110140毫米/转0,03-0,100,04-0,120,05-0,150,05-0,180,06-0,210,07-0,23
    3101320毫米/转0,02-0,080,03-0,100,04-0,120,05-0,160,05-0,180,06-0,20
    4102040毫米/转0,02-0,080,03-0,100,04-0,120,05-0,160,05-0,180,06-0,20
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值1/4 0.2505/16 0.3133/8 0.3751/2 0.5005/8 0.6253/4 0.750
    S4304070英寸/转0.001–0.0030.001–0.0040.002–0.0050.002–0.0060.002–0.0070.002–0.008
    N1330750890英寸/转0.005–0.0090.006–0.0090.008–0.0110.009–0.0130.011–0.0160.013–0.019
    2 330720890英寸/转0.006–0.0090.006–0.0110.008–0.0130.009–0.0140.011–0.0170.013–0.021
    3300590750英寸/转0.005–0.0090.006–0.0090.008–0.0110.009–0.0130.011–0.0160.013–0.019
    4300430660英寸/转0.004–0.0070.006–0.0110.008–0.0130.009–0.0140.011–0.0160.013–0.019
    碳4230360460英寸/转0.001-0.0040.002-0.0050.002-0.0060.002-0.0070.002-0.0080.003-0.009
    4304070英寸/转0.001-0.0030.001-0.0040.002-0.0050.002-0.0060.002-0.0070.002-0.008
    43070130英寸/转0.001-0.0030.001-0.0040.002-0.0050.002-0.0060.002-0.0070.002-0.008
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6.08.010.012.016.020.0
    S4101320mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    N1100230270mm/r0.13～0.220.16～0.240.20～0.280.24～0.320.28～0.400.32～0.48
    2100220270mm/r0.14～0.230.16～0.280.20～0.320.24～0.360.28～0.400.32～0.52
    390180230mm/r0.13～0.220.16～0.240.20～0.280.24～0.320.28～0.400.32～0.48
    490130200mm/r0.10～0.180.16～0.280.20～0.320.24～0.360.28～0.400.32～0.52
    C270110140mm/r0.03～0.100.04～0.120.05～0.150.05～0.180.06～0.210.07～0.23
    3101320mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    4102040mm/r0.02～0.080.03～0.100.04～0.120.05～0.160.05～0.180.06～0.20
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值1/4 0.2505/16 0.3133/8 0.3751/2 0.5005/8 0.6253/4 0.750
    C1260330490英寸/转0.002 0.0080.002 0.0080.002 0.0080.002 0.0080.002 0.0080.002 0.008
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,016,020,0
    C180100150毫米/转0,05 0,200,05 0,200,05 0,200,05 0,200,05 0,200,05 0,20
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08.010.012.016.020.0
    C180100150mm/r0.05～0.200.05～0.200.05～0.200.05～0.200.05～0.200.05～0.20
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    P0110140170毫米/转0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    1110140170毫米/转0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    2100120140毫米/转0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    380100120毫米/转0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    47090110毫米/转0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    56080100毫米/转0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    66080100毫米/转0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    M1406080毫米/转0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    2355570毫米/转0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    K190120175毫米/转0,12-0,210,14-0,240,16-0,280,18-0,320,20-0,360,22-0,400,25-0,440,28-0,480,29-0,50
    280110140毫米/转0,12–0,210,14–0,240,16–0,280,18–0,320,20–0,360,22–0,400,25–0,440,28–0,480,29–0,50
    37080100毫米/转0,11-0,190,13-0,220,14-0,250,16-0,280,18-0,320,21-0,360,23-0,400,26-0,440,27-0,46
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值.236.315.394.472.551.630.787.9451.023
    P0360460560英寸/转0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    1360460560英寸/转0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    2330400460英寸/转0.004–0.0070.004–0.0090.005–0.0090.006–0.0100.007–0.0110.007–0.0120.008–0.0130.009–0.0150.009–0.016
    3260330400英寸/转0.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.008–0.0120.008–0.0140.009–0.014
    4230330360英寸/转0.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.008–0.0120.008–0.0140.009–0.014
    5200260330英寸/转0.004–0.0060.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.007–0.0130.008–0.013
    6200260330英寸/转0.004–0.0060.004–0.0070.004–0.0080.005–0.0090.006–0.0090.006–0.0100.007–0.0110.007–0.0130.008–0.013
    M1130200260英寸/转0.003–0.0050.003–0.0060.004–0.0060.004–0.0070.005–0.0080.005–0.0090.006–0.0090.006–0.0100.006–0.011
    2120180230英寸/转0.003–0.0050.003–0.0060.004–0.0060.004–0.0070.005–0.0080.005–0.0090.006–0.0090.006–0.0100.006–0.011
    K1300400580英寸/转0.005-0.0080.006-0.0090.006-0.0110.007-0.0130.008-0.0140.009-0.0160.010-0.0170.011-0.0190.011-0.020
    2260360460英寸/转0.005–0.0080.006–0.0090.006–0.0110.007–0.0130.008–0.0140.009–0.0160.010–0.0170.011–0.0190.011–0.020
    3230260330英寸/转0.004-0.0070.005-0.0090.006-0.0100.006-0.0110.007-0.0130.008-0.0140.009-0.0160.010-0.0170.011-0.018
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,014,016,020,024,026,0
    P0110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    1110140170mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    2100120140mm/r0,10–0,190,11–0,220,13–0,240,15–0,260,17–0,290,19–0,310,21–0,340,23–0,380,24–0,40
    380100120mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    47090110mm/r0,10–0,170,11–0,200,12–0,220,14–0,240,16–0,260,18–0,280,20–0,310,21–0,350,22–0,36
    56080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    66080100mm/r0,09–0,160,10–0,180,11–0,200,13–0,220,15–0,240,16–0,260,18–0,290,19–0,330,20–0,34
    M1406080mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    2355570mm/r0,07–0,120,08–0,140,09–0,160,11–0,180,12–0,200,13–0,220,14–0,240,15–0,260,16–0,27
    K190120175mm/r0,12-0,210,14-0,240,16-0,280,18-0,320,20-0,360,22-0,400,25-0,440,28-0,480,29-0,50
    280110140mm/r0,12–0,210,14–0,240,16–0,280,18–0,320,20–0,360,22–0,400,25–0,440,28–0,480,29–0,50
    37080100mm/r0,11-0,190,13-0,220,14-0,250,16-0,280,18-0,320,21-0,360,23-0,400,26-0,440,27-0,46
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,016,020,024,026,0
    P070125175mm/r0,09–0,180,10–0,210,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    170120170mm/r0,09–0,180,10–0,220,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    290135180mm/r0,09–0,180,10–0,250,12–0,270,14–0,330,18–0,390,23–0,450,27–0,510,28–0,50
    36095130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,28–0,450,30–0,46
    45090130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,24–0,450,25–0,46
    53065100mm/r0,09–0,150,10–0,180,10–0,220,11–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    6406080mm/r0,09–0,150,09–0,180,10–0,220,10–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    M1205590mm/r0,07–0,120,08–0,130,08–0,140,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    2306090mm/r0,07–0,120,08–0,130,08–0,160,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    3204060mm/r0,07–0,120,08–0,120,08–0,140,10–0,160,12–0,220,15–0,260,18–0,270,19–0,28
    K180140200mm/r0,11–0,260,13–0,320,15–0,440,18–0,490,25–0,580,29–0,640,35–0,700,36–0,75
    280130180mm/r0,11–0,260,13–0,310,15–0,360,18–0,400,25–0,480,29–0,600,35–0,700,36–0,75
    37095120mm/r0,10-0,220,12-0,250,15-0,350,16-0,400,20-0,480,26-0,600,30-0,630,32-0,65
    S1102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    2102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    3152535mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    4203040mm/r0,04–0,070,05–0,090,05–0,100,07–0,120,08–0,130,08–0,130,09–0,150,10–0,17
    材料 分组切削速度 vc英制
    范围－SFM推荐每转进给
    最小值初始值最大值.236.315.394.472.630.787.9451.023
    P0230410570IPR.004–.007.004–.008.005–.009.006–.012.007–.014.009–.016.011–.019.011–.020
    1230390560IPR.004–.007.004–.009.005–.009.006–.012.007–.014.009–.016.011–.019.011–.020
    2300440590IPR.004–.007.004–.010.005–.011.006–.013.007–.015.009–.018.011–.020.011–.020
    3200310430IPR.004–.006.004–.011.004–.011.005–.013.007–.015.009–.016.011–.018.012–.018
    4160300430IPR.004–.006.004–.011.004–.011.005–.013.007–.015.009–.016.009–.018.010–.018
    5100210330IPR.004–.006.004–.007.004–.009.004–.011.006–.013.008–.015.009–.016.009–.017
    6130200260IPR.004–.006.004–.007.004–.009.004–.011.006–.013.008–.015.009–.016.009–.017
    M170180300IPR.003–.005.003–.005.003–.006.004–.007.005–.009.006–.010.007–.011.008–.011
    2100200300IPR.003–.005.003–.005.003–.006.004–.007.005–.009.006–.010.007–.011.008–.011
    370130200IPR.003–.005.003–.005.003–.006.004–.006.005–.009.006–.010.007–.011.008–.011
    K1260460660IPR.004–.010.005–.013.006–.017.007–.019.010–.023.011–.025.014–.028.014–.030
    2260430590IPR.004–.010.005–.012.006–.014.007–.016.010–.019.011–.024.014–.028.014–.030
    3230310390IPR.004–.009.005–.010.006–.014.006–.016.008–.019.010–.024.012–.025.013–.026
    S13070100IPR.002–.004.002–.004.003–.005.003–.005.004–.006.004–.007.005–.008.005–.008
    23070100IPR.002–.004.002–.004.003–.005.003–.005.004–.006.004–.007.005–.008.005–.008
    35080110IPR.002–.004.002–.004.003–.005.003–.005.004–.006.004–.007.005–.008.005–.008
    470100130IPR.002–.003.002–.004.002–.004.003–.005.003–.005.003–.005.004–.006.004–.007
    材料 分组切削速度 vc公制
    范围 m/min推荐每转进给
    最小值初始值最大值6,08,010,012,016,020,024,026,0
    P070125175mm/r0,09–0,180,10–0,210,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    170120170mm/r0,09–0,180,10–0,220,12–0,240,14–0,300,18–0,360,23–0,420,27–0,480,28–0,50
    290135180mm/r0,09–0,180,10–0,250,12–0,270,14–0,330,18–0,390,23–0,450,27–0,510,28–0,50
    36095130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,28–0,450,30–0,46
    45090130mm/r0,09–0,160,10–0,280,11–0,290,13–0,330,17–0,370,22–0,410,24–0,450,25–0,46
    53065100mm/r0,09–0,150,10–0,180,10–0,220,11–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    6406080mm/r0,09–0,150,09–0,180,10–0,220,10–0,270,15–0,320,19–0,370,23–0,420,24–0,43
    M1205590mm/r0,07–0,120,08–0,130,08–0,140,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    2306090mm/r0,07–0,120,08–0,130,08–0,160,10–0,180,12–0,220,15–0,260,18–0,270,19–0,28
    3204060mm/r0,07–0,120,08–0,120,08–0,140,10–0,160,12–0,220,15–0,260,18–0,270,19–0,28
    K180140200mm/r0,11–0,260,13–0,320,15–0,440,18–0,490,25–0,580,29–0,640,35–0,700,36–0,75
    280130180mm/r0,11–0,260,13–0,310,15–0,360,18–0,400,25–0,480,29–0,600,35–0,700,36–0,75
    37095120mm/r0,10-0,220,12-0,250,15-0,350,16-0,400,20-0,480,26-0,600,30-0,630,32-0,65
    S1102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    2102030mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    3152535mm/r0,05–0,090,06–0,100,07–0,120,08–0,130,10–0,150,11–0,170,12–0,190,13–0,21
    4203040mm/r0,04–0,070,05–0,090,05–0,100,07–0,120,08–0,130,08–0,130,09–0,150,10–0,17
    您即将把 添加至“我的解决方案”页面. 是否要继续？
    Select the destination where you want to move 到.
    最新 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    请输入一个有效名称
    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    应记录以查看仪表盘信息
    Session expired due to inactivity, please login again
    您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
    件物品已成功添加到购物车
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk