Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch

Name: Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch
SKU: 104879658
Rating: 0 (0 reviews)

Shoulder milling cutter for multiple materials

Features and benefits

Internal coolant supply.

For ramping, slotting, plunging, facing, and true 90° walls.

These shell mills accept inserts with corner radii from .079" (2.4mm) to .25" (6.4mm) without further pocket modifications..

Uses and application

端面铣削
螺旋铣削
坡铣：毛坯
槽铣：方头立铣
侧铣/方肩铣削：方头立铣
铣削 — 贯通式冷却
刀柄 — 圆柱 Weldon 2平底
刀座

刀片选择指南

Malzeme grubu	Hafif işleme		Genel amaçlı kullanım		Ağır işleme
–	(Hafif geometri)		–		(Sert geometri)
–	Aşınma direnci				Tokluk
–	Geometri	Kalite	Geometri	Kalite	Geometri	Kalite
P1–P2	.E..GD	KCPM40	.S..GD	KCPM40	.E..HD	KCPM40
P3–P4	.E..GD	KCPK30	.S..GD	KCPK30	.E..HD	KCPK30
P5–P6	.E..GD	KC725M	.S..GD	KC725M	.E..HD	KC725M
M1–M2	.E..GD	KCSM40	.S..GD	KCSM40	.E..HD	KCSM40
M3	.E..GD	KCPM40	.S..GD	KCPM40	.E..HD	KCPM40
K1–K2	.E..GD	KCK20B	.E..GD	KCK20B	.S..GD	KCK15
K3	.E..GD	KCK20B	.S..GD	KCK15	.E..HD	KCPK30
N1–N2	.F..LDJ	KC410M	.E..LDJ	KC422M	.E..LDJ	KC422M
N3	.F..LDJ	KC410M	.F..LDJ	KC410M	.F..LDJ	KC410M
S1–S2	.E..GD	KC725M	.S..GD	KC725M	.E..HD	KC725M
S3	.E..GD	KCSM40	.S..GD	KCSM40	.E..HD	KCSM40
S4	.E..GD	KCSM40	.S..GD	KCSM40	.E..HD	KCSM40
H1	–	–	–	–	–	–

Recommended Starting Feeds [IPT]

Mill 1-18™ • Recommended Starting Feeds [IPT]
Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LDJ	0.005	0.019	0.033	0.003	0.013	0.023	0.003	0.010	0.018	0.002	0.009	0.015	0.002	0.008	0.014
.E..LDJ	0.005	0.018	0.032	0.003	0.013	0.023	0.003	0.010	0.017	0.002	0.009	0.015	0.002	0.008	0.014
.E..LD	0.007	0.019	0.032	0.005	0.013	0.023	0.004	0.010	0.017	0.003	0.009	0.015	0.003	0.008	0.014
.E..GD	0.009	0.020	0.035	0.007	0.015	0.025	0.005	0.011	0.019	0.004	0.010	0.016	0.004	0.009	0.015
.S..GE	0.009	0.020	0.035	0.007	0.014	0.025	0.005	0.011	0.019	0.004	0.009	0.017	0.004	0.009	0.015
.S..GD	0.009	0.020	0.035	0.007	0.015	0.025	0.005	0.011	0.019	0.004	0.009	0.016	0.004	0.009	0.015
.E..HD	0.009	0.023	0.037	0.007	0.017	0.027	0.005	0.013	0.020	0.004	0.011	0.017	0.004	0.010	0.016
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

推荐初始速度 [m/min]

Mill 1-18™ • Recommended Starting Speed [m/min]
Kalite		KC410M			KC422M			KC522M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM30			KCSM40
Talaş kalınlığı hex mm		Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.
Malzeme grubu		Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.
P	1	–	–	–	–	–	–	330	285	270	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	370	320	300	350	320	300
	2	–	–	–	–	–	–	275	240	200	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	305	270	220	300	270	220
	3	–	–	–	–	–	–	255	215	175	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	285	240	195	280	240	195
	4	–	–	–	–	–	–	225	185	150	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	250	205	165	240	205	165
	5	–	–	–	–	–	–	185	170	150	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	205	190	165	200	180	160
	6	–	–	–	–	–	–	165	125	100	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	185	140	110	180	140	100
M	1	–	–	–	–	–	–	205	180	165	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	225	180	170	260	210	185
	2	–	–	–	–	–	–	185	160	130	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	205	160	135	235	180	145
	3	–	–	–	–	–	–	140	120	95	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	155	125	95	175	145	110
K	1	–	–	–	–	–	–	230	205	185	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	180	160	150	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	150	135	120	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	–	–	–	–	–	–
N	1	1215	1080	995	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	45	40	30	50	40	25
	2	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	45	40	30	55	40	25
	3	–	–	–	–	–	–	50	40	25	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	55	45	30	65	45	30
	4	–	–	–	–	–	–	50	45	35	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	60	55	40	75	60	40
H	1	–	–	–	–	–	–	120	90	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	135	100	75	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

Mill 1-18™ • Recommended Starting Speed [SFM]
Kalite		KC410M			KC422M			KC522M			KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM30			KCSM40
Chip Thickness hex Inch		Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.	Min.		Maks.
Malzeme grubu		Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.	Maks.	Başlangıç	Min.
P	1	–	–	–	–	–	–	330	285	270	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	370	320	300	350	320	300
	2	–	–	–	–	–	–	275	240	200	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	305	270	220	300	270	220
	3	–	–	–	–	–	–	255	215	175	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	285	240	195	280	240	195
	4	–	–	–	–	–	–	225	185	150	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	250	205	165	240	205	165
	5	–	–	–	–	–	–	185	170	150	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	205	190	165	200	180	160
	6	–	–	–	–	–	–	165	125	100	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	185	140	110	180	140	100
M	1	–	–	–	–	–	–	205	180	165	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	225	180	170	260	210	185
	2	–	–	–	–	–	–	185	160	130	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	205	160	135	235	180	145
	3	–	–	–	–	–	–	140	120	95	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	155	125	95	175	145	110
K	1	–	–	–	–	–	–	230	205	185	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	180	160	150	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	150	135	120	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	–	–	–	–	–	–
N	1	1215	1080	995	1075	945	875	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	1080	995	915	945	875	760	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	45	40	30	50	40	25
	2	–	–	–	–	–	–	40	35	25	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	45	40	30	55	40	25
	3	–	–	–	–	–	–	50	40	25	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	55	45	30	65	45	30
	4	–	–	–	–	–	–	50	45	35	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	60	55	40	75	60	40
H	1	–	–	–	–	–	–	120	90	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	135	100	75	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

应用举例

Mill 1-18™ • Ramping Angles [mm]
Kesici uç tipi	Kesme çapı	maks rampa açısı	DH min [mm] - (min hole diameter)	DH min (minumum delik çapı)	DHI min (minimum tabanı düz olan delik çapı)
Mill-1, 18mm	25	17˚	29,24	50	45,84
Mill-1, 18mm	32	11˚	42,98	64	59,84
Mill-1, 18mm	40	8˚	58,92	80	75,84
Mill-1, 18mm	50	5˚	78,88	100	95,84
Mill-1, 18mm	63	4˚	104,86	126	121,84
Mill-1, 18mm	80	3˚	139,02	160	156,5
Mill-1, 18mm	100	2˚	179,00	200	196,5
Mill-1, 18mm	125	2˚	228,98	250	246,5
Mill-1, 18mm	160	1˚	298,98	320	316,5

Application Examples

Mill 1-18™ • Ramping Angles [Inch]
Kesici uç tipi	Kesme çapı	maks rampa açısı	DH min [Inch] - (min hole diameter)	DH min (minumum delik çapı)	DHI min (minimum tabanı düz olan delik çapı)

Mill 1-18™ • Recommended Starting Feeds [mm/th]
Kesici uç geometrisi	Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı.
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.F..LDJ	0,12	0,46	0,82	0,08	0,33	0,59	0,06	0,25	0,44	0,06	0,22	0,38	0,05	0,20	0,35
.E..LDJ	0,12	0,45	0,80	0,08	0,33	0,58	0,06	0,24	0,43	0,06	0,21	0,38	0,05	0,20	0,35
.E..LD	0,17	0,47	0,82	0,12	0,34	0,59	0,09	0,26	0,44	0,08	0,22	0,38	0,07	0,20	0,35
.E..GD	0,23	0,52	0,89	0,17	0,37	0,64	0,13	0,28	0,48	0,11	0,24	0,42	0,10	0,22	0,38
.S..GE	0,23	0,51	0,89	0,17	0,37	0,64	0,13	0,27	0,48	0,11	0,24	0,42	0,10	0,22	0,38
.S..GD	0,23	0,51	0,89	0,17	0,37	0,64	0,13	0,28	0,48	0,11	0,24	0,41	0,10	0,22	0,38
.E..HD	0,23	0,59	0,95	0,17	0,43	0,68	0,13	0,32	0,51	0,11	0,28	0,44	0,10	0,25	0,41
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

欢迎

请确认您的首选项

更新首选项

产品建议

Product Family suggestions

请联系销售团队

请联系销售团队

编辑解决方案

添加解决方案

Mill 1-18™ • End Mill • Reduced Weldon Shank • For corner radii from .079" (2.4mm) to .25" (6.4mm) • Inch