Name: KVNS™ A2™ • Arbor Mount • Metric
SKU: 1246122
Rating: 0 (0 reviews)

High Performance Combination Tools

KVNS™ A2™ Slotting Cutters • Insert Selection Guide
材料分组	轻切削		中等切削		重切削
–	(锋利的槽型)				(强壮的槽型)
–	耐磨性				韧性
–	槽型	材质	槽型	材质	槽型	材质
P1-P2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
P3-P4	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
P5-P6	.S..GD	KCPK30	.S..GB	KCPK30	.S..GB	KCPK30
M1-M2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
M3	.S..GD	KCPK30	.S..GB	KCPK30	.S..GB	KCPK30
K1-K2	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
K3	.S..GD	KCPK30	.S..GD	KCPK30	.S..GB	KCPK30
N1-N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1-S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

阅读全文View Less

Feeds

KVNS™ A2™ Series • Recommended Starting Feeds [IPT]
刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.S..GD	0.009	0.017	0.026	0.007	0.013	0.019	0.005	0.009	0.014	0.004	0.008	0.012	0.004	0.008	0.011
.S..GB	0.009	0.017	0.028	0.007	0.013	0.020	0.005	0.009	0.015	0.004	0.008	0.013	0.004	0.008	0.012
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

阅读全文View Less

Speeds

KVNS™ A2™ Series • Recommended Starting Speed [m/min]
刀片材质		KCPK30			KMF
切削厚度 hex mm		最小值		最大值	最小值		最大值
材料分组		最大值	初始值	最小值	最大值	初始值	最小值
P	1	455	395	370	–	–	–
	2	280	255	230	–	–	–
	3	255	230	205	–	–	–
	4	225	185	160	–	–	–
	5	190	170	150	–	–	–
	6	160	135	110	–	–	–
M	1	205	185	155	–	–	–
	2	185	160	140	–	–	–
	3	145	130	115	–	–	–
K	1	295	265	240	–	–	–
	2	235	210	190	–	–	–
	3	195	175	160	–	–	–
N	1	–	–	–	335	298	271
	2	–	–	–	335	298	271
	3	–	–	–	219	198	170
S	1	–	–	–	30	24	20
	2	–	–	–	30	24	20
	3	–	–	–	30	24	20
	4	50	45	35	24	24	24
H	1	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

KVNS™ A2™ Series • Recommended Starting Speed [SFM]
刀片材质		KCPK30			KMF
Chip Thickness hex Inch		最小值		最大值	最小值		最大值
材料分组		最大值	初始值	最小值	最大值	初始值	最小值
P	1	1495	1295	1215	–	–	–
	2	920	835	755	–	–	–
	3	835	755	675	–	–	–
	4	740	605	525	–	–	–
	5	625	560	490	–	–	–
	6	525	445	360	–	–	–
M	1	675	605	510	–	–	–
	2	605	525	460	–	–	–
	3	475	425	375	–	–	–
K	1	970	870	785	–	–	–
	2	770	690	625	–	–	–
	3	640	575	525	–	–	–
N	1	–	–	–	1100	980	890
	2	–	–	–	1100	980	890
	3	–	–	–	720	650	560
S	1	–	–	–	100	80	65
	2	–	–	–	100	80	65
	3	–	–	–	100	80	65
	4	165	150	115	80	80	80
H	1	–	–	–	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

阅读全文View Less

You are about to leave the Solution building process.

Are you sure you want to leave?

KVNS™ A2™ Series • Recommended Starting Feeds [mm/th]
刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)
	5%			10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H	L	M	H
.S..GD	0,23	0,46	0,71	0,17	0,33	0,51	0,13	0,25	0,38	0,11	0,22	0,33	0,10	0,20	0,30
.S..GB	0,23	0,46	0,74	0,17	0,33	0,54	0,13	0,25	0,40	0,11	0,22	0,35	0,10	0,20	0,32
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

产品类似于:

KVNS™ A2™ • Arbor Mount • Metric