PCD Drills • Aluminum Machining

Kennametal's Polycrystalline Diamond (PCD) drills for aluminum machining are engineered to deliver close tolerances in non-ferrous materials. Specifically designed for aluminum applications, these drills feature a 5xD length-to-diameter ratio, providing extended reach and depth capabilities. The straight flute design ensures stability during the drilling process, enhancing chip evacuation and minimizing tool deflection. Internal coolant channels allow for efficient chip evacuation in roughing and finishing applications. Kennametal's PCD drills will drastically shorten cycle times and increase productivity. They are a reliable choice for high-performance solutions in aluminum holemaking applications.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • N Non-Ferrous Materials (49)
      • N1
        Wrought Aluminum (49)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(49)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(49)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (49)
    Applications
    Applications
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (49)
    • DrillingDrilling (49)
    Cutting Diameter
    Cutting Diameter
    • 0.234 in(1)
    • 0.237 in(1)
    • 0.25 in(1)
    • 0.256 in(1)
    • 0.276 in(1)
    • 0.281 in(1)
    • 0.295 in(1)
    • 0.313 in(1)
    • 0.315 in(1)
    • 0.328 in(1)
    • 0.335 in(1)
    • 0.345 in(1)
    • 0.354 in(1)
    • 0.374 in(1)
    • 0.375 in(1)
    • 0.391 in(1)
    • 0.394 in(1)
    • 0.408 in(1)
    • 0.414 in(1)
    • 0.422 in(1)
    • 0.433 in(1)
    • 0.438 in(1)
    • 0.453 in(2)
    • 0.473 in(1)
    • 0.484 in(1)
    • 0.492 in(1)
    • 0.5 in(1)
    • 0.512 in(1)
    • 0.531 in(2)
    • 0.551 in(1)
    • 0.564 in(1)
    • 0.572 in(1)
    • 0.578 in(1)
    • 0.591 in(1)
    • 0.61 in(1)
    • 0.625 in(1)
    • 0.63 in(1)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.672 in(1)
    • 0.69 in(1)
    • 0.709 in(1)
    • 0.728 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.768 in(1)
    • 0.787 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.95 mm(1)
    • 6.0 mm(1)
    • 6.351 mm(1)
    • 6.5 mm(1)
    • 7.0 mm(1)
    • 7.15 mm(1)
    • 7.5 mm(1)
    • 7.95 mm(1)
    • 8.0 mm(1)
    • 8.326 mm(1)
    • 8.5 mm(1)
    • 8.725 mm(1)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 9.525 mm(1)
    • 9.925 mm(1)
    • 10.0 mm(1)
    • 10.326 mm(1)
    • 10.5 mm(1)
    • 10.726 mm(1)
    • 11.0 mm(1)
    • 11.125 mm(1)
    • 11.5 mm(2)
    • 12.0 mm(1)
    • 12.3 mm(1)
    • 12.5 mm(1)
    • 12.701 mm(1)
    • 13.0 mm(1)
    • 13.5 mm(2)
    • 14.0 mm(1)
    • 14.3 mm(1)
    • 14.5 mm(1)
    • 14.675 mm(1)
    • 15.0 mm(1)
    • 15.5 mm(1)
    • 15.875 mm(1)
    • 16.0 mm(1)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 17.075 mm(1)
    • 17.5 mm(1)
    • 18.0 mm(1)
    • 18.5 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 34.9 mm(2)
    • 35.0 mm(1)
    • 40.301 mm(2)
    • 43.0 mm(4)
    • 48.7 mm(3)
    • 49.0 mm(4)
    • 53.1 mm(4)
    • 55.6 mm(3)
    • 56.0 mm(4)
    • 60.0 mm(6)
    • 63.0 mm(4)
    • 64.5 mm(2)
    • 71.0 mm(4)
    • 73.0 mm(1)
    • 74.5 mm(1)
    • 77.0 mm(4)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 1.374 in(2)
    • 1.379 in(1)
    • 1.587 in(2)
    • 1.693 in(4)
    • 1.917 in(3)
    • 1.929 in(4)
    • 2.091 in(4)
    • 2.189 in(3)
    • 2.205 in(4)
    • 2.362 in(6)
    • 2.48 in(4)
    • 2.539 in(2)
    • 2.795 in(4)
    • 2.874 in(1)
    • 2.934 in(1)
    • 3.031 in(4)
    Maximum Hole Depth [L4] MintoMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 1.614 in(3)
    • 1.713 in(2)
    • 1.732 in(2)
    • 1.988 in(1)
    • 2.0 in(1)
    • 2.087 in(4)
    • 2.382 in(3)
    • 2.402 in(4)
    • 2.618 in(4)
    • 2.777 in(3)
    • 2.795 in(1)
    • 3.012 in(2)
    • 3.031 in(3)
    • 3.248 in(2)
    • 3.269 in(4)
    • 3.642 in(1)
    • 3.661 in(4)
    • 3.761 in(1)
    • 3.976 in(4)
    Reach MintoReach Max
    Reach
    Reach
    • 41.0 mm(3)
    • 43.5 mm(2)
    • 44.0 mm(2)
    • 50.5 mm(1)
    • 50.801 mm(1)
    • 53.0 mm(4)
    • 60.5 mm(3)
    • 61.0 mm(4)
    • 66.5 mm(4)
    • 70.5 mm(3)
    • 71.0 mm(1)
    • 76.5 mm(2)
    • 77.0 mm(3)
    • 82.5 mm(2)
    • 83.0 mm(4)
    • 92.5 mm(1)
    • 93.0 mm(4)
    • 95.5 mm(1)
    • 101.0 mm(4)
    Reach MintoReach Max
    Over All Length [L]
    Over All Length [L]
    • 3.248 in(3)
    • 3.602 in(6)
    • 4.075 in(7)
    • 4.39 in(4)
    • 4.665 in(7)
    • 4.902 in(6)
    • 5.256 in(6)
    • 5.65 in(5)
    • 5.846 in(1)
    • 6.043 in(4)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 82.5 mm(3)
    • 91.5 mm(6)
    • 103.5 mm(7)
    • 111.5 mm(4)
    • 118.5 mm(7)
    • 124.5 mm(6)
    • 133.5 mm(6)
    • 143.5 mm(5)
    • 148.5 mm(1)
    • 153.5 mm(4)
    Over All Length [L] MintoOver All Length [L] Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 6.0 mm(1)
    • 6.351 mm(2)
    • 7.95 mm(2)
    • 8.0 mm(4)
    • 9.525 mm(3)
    • 10.0 mm(4)
    • 11.125 mm(4)
    • 12.0 mm(4)
    • 12.701 mm(3)
    • 14.0 mm(4)
    • 14.3 mm(2)
    • 15.875 mm(2)
    • 16.0 mm(4)
    • 17.45 mm(1)
    • 18.0 mm(4)
    • 19.05 mm(1)
    • 20.0 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.237 in(1)
    • 0.25 in(2)
    • 0.313 in(2)
    • 0.315 in(4)
    • 0.375 in(3)
    • 0.394 in(4)
    • 0.438 in(4)
    • 0.473 in(4)
    • 0.5 in(3)
    • 0.551 in(4)
    • 0.564 in(2)
    • 0.625 in(2)
    • 0.63 in(4)
    • 0.687 in(1)
    • 0.709 in(4)
    • 0.75 in(1)
    • 0.787 in(4)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?