Combination Tools
| Combination drilling tools integrate centering, drilling, and countersinking all into a single operation, increasing productivity by reducing cycle time and tool changes. The BF and SEFAS™ systems adapt to various hole geometries with full through-coolant capabilities. The HiPACS system achieves precise countersinking for aerospace applications. KenShape MaPACS and MaxPACS countersinks excel in manual CFRP countersinking for aerospace rivet hole drilling, offering minimal operator effort, superior hole quality, and competitive cost per hole. These tools set new benchmarks in cost-effectiveness and flexibility. |
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (229)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(229)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(229)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(229)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(229)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(229)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(228)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(190)
- M Stainless Steel (115)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(115)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(115)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(112)
- K Cast Iron (230)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(230)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(230)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(230)
- N Non-Ferrous Materials (126)
- N1Wrought Aluminum (126)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(126)
- N3High-Silicon Aluminum Alloys Si >12.2%(126)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (126)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (116)
- N6Carbon, Graphite Composites, CFRP (116)
- N7MMC's (113)
- S High-Temp Alloys (122)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(112)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(112)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(112)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(122)
- H Hardened Materials (45)
- H1Hardened Materials 44-48 HRC(45)
- H2Hardened Materials 48-55 HRC(45)
- H3Hardened Materials 56-60 HRC(45)
- H4Hardened Materials >60 HRC(45)
- C CFRP Materials (25)
- C1CFRP, CFRP / CFRP (15)
- C2CFRP / Aluminium CFRP / Non-Ferrous (15)
- C3CFRP / Titanium CFRP / High Temp (15)
- C4CFRP / Stainless Steel (15)
Select First Choice
- IN (3)
Applications
Applications
Counterboring (21)
Countersinking (113)
Drilling (219)
Inclined Exit Drilling (67)
Stacked Plates Drilling (146)
Cutting Diameter
Cutting Diameter
- 0.125 in(1)
- 0.134 in(2)
- 0.138 in(1)
- 0.143 in(1)
- 0.15 in(2)
- 0.154 in(1)
- 0.156 in(2)
- 0.157 in(4)
- 0.161 in(3)
- 0.165 in(1)
- 0.169 in(1)
- 0.177 in(1)
- 0.181 in(3)
- 0.182 in(2)
- 0.188 in(2)
- 0.19 in(7)
- 0.197 in(1)
- 0.201 in(3)
- 0.206 in(1)
- 0.209 in(1)
- 0.213 in(2)
- 0.217 in(1)
- 0.219 in(8)
- 0.221 in(1)
- 0.228 in(1)
- 0.237 in(4)
- 0.24 in(3)
- 0.244 in(1)
- 0.25 in(12)
- 0.252 in(1)
- 0.256 in(1)
- 0.257 in(1)
- 0.26 in(1)
- 0.264 in(1)
- 0.266 in(1)
- 0.268 in(1)
- 0.272 in(1)
- 0.276 in(1)
- 0.281 in(1)
- 0.288 in(3)
- 0.291 in(1)
- 0.295 in(1)
- 0.297 in(1)
- 0.307 in(1)
- 0.311 in(1)
- 0.312 in(2)
- 0.313 in(7)
- 0.315 in(5)
- 0.319 in(5)
- 0.322 in(1)
- 0.323 in(2)
- 0.327 in(2)
- 0.328 in(3)
- 0.331 in(2)
- 0.332 in(2)
- 0.335 in(3)
- 0.336 in(2)
- 0.339 in(3)
- 0.343 in(4)
- 0.345 in(3)
- 0.347 in(3)
- 0.349 in(2)
- 0.351 in(2)
- 0.354 in(1)
- 0.358 in(3)
- 0.359 in(1)
- 0.368 in(1)
- 0.37 in(1)
- 0.374 in(2)
- 0.375 in(7)
- 0.376 in(1)
- 0.377 in(1)
- 0.378 in(1)
- 0.382 in(1)
- 0.386 in(2)
- 0.387 in(1)
- 0.39 in(1)
- 0.391 in(2)
- 0.394 in(6)
- 0.395 in(2)
- 0.397 in(2)
- 0.398 in(4)
- 0.402 in(3)
- 0.404 in(2)
- 0.406 in(3)
- 0.408 in(4)
- 0.41 in(3)
- 0.414 in(3)
- 0.417 in(1)
- 0.422 in(1)
- 0.425 in(1)
- 0.433 in(1)
- 0.437 in(4)
- 0.438 in(2)
- 0.441 in(1)
- 0.453 in(3)
- 0.457 in(1)
- 0.461 in(2)
- 0.465 in(2)
- 0.47 in(2)
- 0.473 in(5)
- 0.477 in(1)
- 0.48 in(4)
- 0.484 in(2)
- 0.488 in(1)
- 0.491 in(1)
- 0.492 in(1)
- 0.5 in(1)
- 0.504 in(1)
- 0.512 in(1)
- 0.516 in(3)
- 0.52 in(1)
- 0.531 in(1)
- 0.551 in(7)
- 0.555 in(5)
- 0.559 in(4)
- 0.564 in(6)
- 0.568 in(3)
- 0.572 in(1)
- 0.576 in(1)
- 0.578 in(1)
- 0.579 in(1)
- 0.583 in(1)
- 0.587 in(1)
- 0.591 in(3)
- 0.594 in(2)
- 0.595 in(2)
- 0.598 in(2)
- 0.602 in(2)
- 0.605 in(2)
- 0.606 in(2)
- 0.609 in(2)
- 0.61 in(5)
- 0.614 in(2)
- 0.618 in(2)
- 0.622 in(2)
- 0.625 in(4)
- 0.628 in(2)
- 0.63 in(6)
- 0.631 in(2)
- 0.633 in(2)
- 0.634 in(2)
- 0.638 in(2)
- 0.641 in(2)
- 0.642 in(2)
- 0.646 in(2)
- 0.65 in(4)
- 0.654 in(2)
- 0.656 in(2)
- 0.657 in(2)
- 0.661 in(2)
- 0.664 in(2)
- 0.665 in(2)
- 0.669 in(1)
- 0.689 in(1)
- 0.69 in(3)
- 0.709 in(4)
- 0.713 in(1)
- 0.717 in(1)
- 0.719 in(1)
- 0.72 in(1)
- 0.724 in(1)
- 0.728 in(1)
- 0.732 in(1)
- 0.734 in(1)
- 0.736 in(1)
- 0.74 in(1)
- 0.744 in(1)
- 0.75 in(1)
- 0.814 in(1)
- 0.939 in(1)
to
Cutting Diameter
Cutting Diameter
- 3.176 mm(1)
- 3.401 mm(2)
- 3.5 mm(1)
- 3.6 mm(1)
- 3.801 mm(2)
- 3.901 mm(1)
- 3.975 mm(2)
- 4.0 mm(4)
- 4.101 mm(3)
- 4.2 mm(1)
- 4.3 mm(1)
- 4.5 mm(1)
- 4.601 mm(3)
- 4.625 mm(2)
- 4.775 mm(2)
- 4.825 mm(7)
- 5.0 mm(1)
- 5.101 mm(3)
- 5.2 mm(1)
- 5.301 mm(1)
- 5.4 mm(2)
- 5.5 mm(1)
- 5.551 mm(8)
- 5.601 mm(1)
- 5.801 mm(1)
- 6.0 mm(4)
- 6.101 mm(3)
- 6.2 mm(1)
- 6.351 mm(12)
- 6.4 mm(1)
- 6.5 mm(1)
- 6.525 mm(1)
- 6.601 mm(1)
- 6.7 mm(1)
- 6.75 mm(1)
- 6.801 mm(1)
- 6.9 mm(1)
- 7.0 mm(1)
- 7.15 mm(1)
- 7.301 mm(3)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.551 mm(1)
- 7.801 mm(1)
- 7.9 mm(1)
- 7.926 mm(2)
- 7.95 mm(7)
- 8.0 mm(5)
- 8.1 mm(5)
- 8.175 mm(1)
- 8.201 mm(2)
- 8.3 mm(2)
- 8.326 mm(3)
- 8.4 mm(2)
- 8.425 mm(2)
- 8.5 mm(3)
- 8.525 mm(2)
- 8.6 mm(3)
- 8.701 mm(4)
- 8.725 mm(3)
- 8.8 mm(3)
- 8.85 mm(2)
- 8.9 mm(2)
- 9.0 mm(1)
- 9.1 mm(3)
- 9.125 mm(1)
- 9.35 mm(1)
- 9.4 mm(1)
- 9.5 mm(2)
- 9.525 mm(7)
- 9.55 mm(1)
- 9.576 mm(1)
- 9.601 mm(1)
- 9.701 mm(1)
- 9.8 mm(2)
- 9.826 mm(1)
- 9.9 mm(1)
- 9.925 mm(2)
- 10.0 mm(6)
- 10.025 mm(2)
- 10.076 mm(2)
- 10.101 mm(4)
- 10.201 mm(3)
- 10.25 mm(2)
- 10.3 mm(3)
- 10.326 mm(4)
- 10.4 mm(3)
- 10.5 mm(3)
- 10.601 mm(1)
- 10.726 mm(1)
- 10.8 mm(1)
- 11.0 mm(1)
- 11.101 mm(4)
- 11.125 mm(2)
- 11.201 mm(1)
- 11.5 mm(3)
- 11.601 mm(1)
- 11.701 mm(2)
- 11.8 mm(2)
- 11.9 mm(2)
- 12.0 mm(5)
- 12.101 mm(1)
- 12.201 mm(4)
- 12.3 mm(2)
- 12.4 mm(1)
- 12.476 mm(1)
- 12.5 mm(1)
- 12.701 mm(1)
- 12.8 mm(1)
- 13.0 mm(1)
- 13.101 mm(3)
- 13.201 mm(1)
- 13.5 mm(1)
- 14.0 mm(7)
- 14.101 mm(5)
- 14.201 mm(4)
- 14.3 mm(6)
- 14.4 mm(3)
- 14.5 mm(1)
- 14.601 mm(1)
- 14.675 mm(1)
- 14.701 mm(1)
- 14.8 mm(1)
- 14.9 mm(1)
- 15.0 mm(3)
- 15.076 mm(2)
- 15.101 mm(2)
- 15.201 mm(2)
- 15.3 mm(2)
- 15.375 mm(2)
- 15.4 mm(2)
- 15.476 mm(2)
- 15.5 mm(5)
- 15.601 mm(2)
- 15.701 mm(2)
- 15.8 mm(2)
- 15.875 mm(4)
- 15.951 mm(2)
- 16.0 mm(6)
- 16.026 mm(2)
- 16.075 mm(2)
- 16.1 mm(2)
- 16.2 mm(2)
- 16.276 mm(2)
- 16.3 mm(2)
- 16.401 mm(2)
- 16.5 mm(4)
- 16.6 mm(2)
- 16.675 mm(2)
- 16.7 mm(2)
- 16.8 mm(2)
- 16.875 mm(2)
- 16.901 mm(2)
- 17.0 mm(1)
- 17.475 mm(1)
- 17.5 mm(3)
- 18.0 mm(4)
- 18.1 mm(1)
- 18.2 mm(1)
- 18.25 mm(1)
- 18.3 mm(1)
- 18.401 mm(1)
- 18.5 mm(1)
- 18.6 mm(1)
- 18.651 mm(1)
- 18.7 mm(1)
- 18.8 mm(1)
- 18.901 mm(1)
- 19.05 mm(1)
- 20.651 mm(1)
- 23.826 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 10.0 mm(1)
- 10.601 mm(1)
- 11.201 mm(1)
- 12.3 mm(2)
- 12.9 mm(1)
- 13.3 mm(1)
- 13.4 mm(1)
- 13.701 mm(1)
- 14.201 mm(1)
- 14.701 mm(1)
- 15.601 mm(1)
- 15.8 mm(1)
- 15.9 mm(1)
- 16.6 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.2 mm(1)
- 18.6 mm(1)
- 19.0 mm(1)
- 19.3 mm(1)
- 19.401 mm(2)
- 19.5 mm(1)
- 20.3 mm(1)
- 21.0 mm(1)
- 21.1 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.201 mm(1)
- 22.5 mm(1)
- 22.6 mm(1)
- 22.901 mm(1)
- 23.201 mm(1)
- 23.401 mm(1)
- 23.5 mm(1)
- 23.901 mm(1)
- 24.201 mm(1)
- 24.6 mm(1)
- 24.901 mm(1)
- 25.0 mm(10)
- 25.3 mm(1)
- 25.401 mm(1)
- 25.5 mm(1)
- 26.201 mm(1)
- 26.5 mm(1)
- 26.6 mm(2)
- 26.8 mm(2)
- 27.0 mm(3)
- 27.1 mm(1)
- 27.201 mm(1)
- 27.401 mm(1)
- 27.5 mm(1)
- 27.701 mm(1)
- 28.0 mm(1)
- 28.3 mm(2)
- 28.401 mm(1)
- 28.5 mm(1)
- 28.8 mm(1)
- 29.1 mm(1)
- 29.5 mm(1)
- 29.6 mm(1)
- 29.901 mm(1)
- 30.0 mm(9)
- 30.701 mm(1)
- 31.0 mm(1)
- 31.201 mm(2)
- 31.401 mm(1)
- 31.5 mm(2)
- 31.701 mm(1)
- 31.901 mm(1)
- 32.2 mm(1)
- 32.4 mm(1)
- 32.7 mm(1)
- 32.9 mm(2)
- 33.1 mm(2)
- 33.801 mm(2)
- 34.301 mm(1)
- 34.5 mm(1)
- 34.801 mm(1)
- 34.9 mm(1)
- 35.0 mm(1)
- 35.551 mm(1)
- 36.0 mm(2)
- 36.301 mm(1)
- 36.7 mm(1)
- 36.9 mm(1)
- 37.6 mm(1)
- 38.5 mm(1)
- 38.6 mm(1)
- 38.7 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 41.5 mm(1)
- 41.7 mm(1)
- 42.0 mm(1)
- 42.2 mm(1)
- 43.1 mm(1)
- 43.5 mm(2)
- 43.6 mm(1)
- 44.5 mm(1)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 57.0 mm(1)
- 58.0 mm(1)
- 68.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.394 in(1)
- 0.417 in(1)
- 0.441 in(1)
- 0.484 in(2)
- 0.508 in(1)
- 0.524 in(1)
- 0.528 in(1)
- 0.539 in(1)
- 0.559 in(1)
- 0.579 in(1)
- 0.614 in(1)
- 0.622 in(1)
- 0.626 in(1)
- 0.654 in(1)
- 0.694 in(1)
- 0.702 in(1)
- 0.717 in(1)
- 0.732 in(1)
- 0.748 in(1)
- 0.76 in(1)
- 0.764 in(2)
- 0.768 in(1)
- 0.799 in(1)
- 0.828 in(1)
- 0.832 in(1)
- 0.846 in(1)
- 0.866 in(1)
- 0.874 in(1)
- 0.886 in(1)
- 0.89 in(1)
- 0.902 in(1)
- 0.913 in(1)
- 0.921 in(1)
- 0.925 in(1)
- 0.942 in(1)
- 0.954 in(1)
- 0.969 in(1)
- 0.98 in(1)
- 0.984 in(10)
- 0.996 in(1)
- 1.0 in(1)
- 1.004 in(1)
- 1.032 in(1)
- 1.043 in(1)
- 1.047 in(2)
- 1.055 in(2)
- 1.063 in(3)
- 1.067 in(1)
- 1.071 in(1)
- 1.079 in(1)
- 1.083 in(1)
- 1.091 in(1)
- 1.102 in(1)
- 1.114 in(2)
- 1.118 in(1)
- 1.122 in(1)
- 1.135 in(1)
- 1.147 in(1)
- 1.161 in(1)
- 1.165 in(1)
- 1.177 in(1)
- 1.181 in(9)
- 1.209 in(1)
- 1.22 in(1)
- 1.228 in(2)
- 1.236 in(1)
- 1.24 in(2)
- 1.248 in(1)
- 1.256 in(1)
- 1.268 in(1)
- 1.276 in(1)
- 1.287 in(1)
- 1.295 in(2)
- 1.303 in(2)
- 1.331 in(2)
- 1.35 in(1)
- 1.358 in(1)
- 1.37 in(1)
- 1.374 in(1)
- 1.379 in(1)
- 1.401 in(1)
- 1.417 in(2)
- 1.429 in(1)
- 1.445 in(1)
- 1.453 in(1)
- 1.48 in(1)
- 1.516 in(1)
- 1.52 in(1)
- 1.524 in(1)
- 1.583 in(1)
- 1.602 in(1)
- 1.635 in(1)
- 1.643 in(1)
- 1.655 in(1)
- 1.661 in(1)
- 1.697 in(1)
- 1.713 in(2)
- 1.717 in(1)
- 1.752 in(1)
- 1.772 in(1)
- 1.891 in(2)
- 1.969 in(1)
- 2.008 in(1)
- 2.244 in(1)
- 2.283 in(1)
- 2.677 in(1)
to
Reach
Reach
- 0.717 in(1)
- 0.744 in(1)
- 0.772 in(1)
- 0.824 in(2)
- 0.85 in(1)
- 0.87 in(1)
- 0.878 in(1)
- 0.894 in(1)
- 0.917 in(1)
- 0.942 in(1)
- 0.984 in(1)
- 1.004 in(1)
- 1.008 in(1)
- 1.043 in(1)
- 1.091 in(1)
- 1.102 in(1)
- 1.122 in(1)
- 1.143 in(1)
- 1.161 in(1)
- 1.181 in(1)
- 1.189 in(1)
- 1.193 in(1)
- 1.201 in(1)
- 1.24 in(1)
- 1.276 in(1)
- 1.283 in(1)
- 1.299 in(10)
- 1.303 in(1)
- 1.327 in(1)
- 1.339 in(1)
- 1.354 in(1)
- 1.358 in(1)
- 1.374 in(1)
- 1.391 in(1)
- 1.399 in(1)
- 1.407 in(1)
- 1.425 in(1)
- 1.437 in(1)
- 1.476 in(1)
- 1.492 in(1)
- 1.496 in(10)
- 1.512 in(1)
- 1.516 in(1)
- 1.559 in(1)
- 1.575 in(1)
- 1.579 in(1)
- 1.591 in(1)
- 1.598 in(1)
- 1.606 in(2)
- 1.622 in(1)
- 1.631 in(1)
- 1.639 in(1)
- 1.647 in(1)
- 1.655 in(1)
- 1.669 in(1)
- 1.685 in(2)
- 1.689 in(1)
- 1.693 in(1)
- 1.697 in(1)
- 1.728 in(1)
- 1.732 in(1)
- 1.768 in(1)
- 1.776 in(1)
- 1.792 in(1)
- 1.831 in(1)
- 1.846 in(1)
- 1.858 in(1)
- 1.862 in(1)
- 1.879 in(1)
- 1.891 in(1)
- 1.895 in(1)
- 1.907 in(1)
- 1.913 in(1)
- 1.929 in(1)
- 1.941 in(1)
- 1.945 in(1)
- 1.957 in(1)
- 1.98 in(1)
- 1.988 in(2)
- 2.0 in(1)
- 2.035 in(2)
- 2.063 in(1)
- 2.075 in(1)
- 2.091 in(1)
- 2.098 in(1)
- 2.114 in(1)
- 2.15 in(1)
- 2.189 in(1)
- 2.193 in(1)
- 2.213 in(1)
- 2.232 in(1)
- 2.269 in(1)
- 2.323 in(1)
- 2.339 in(1)
- 2.35 in(1)
- 2.43 in(1)
- 2.48 in(1)
- 2.524 in(1)
- 2.535 in(1)
- 2.583 in(1)
- 2.606 in(2)
- 2.618 in(1)
- 2.634 in(1)
- 2.685 in(2)
- 2.736 in(1)
- 2.85 in(2)
- 3.012 in(1)
to
Reach
Reach
- 18.2 mm(1)
- 18.901 mm(1)
- 19.6 mm(1)
- 20.901 mm(2)
- 21.6 mm(1)
- 22.1 mm(1)
- 22.3 mm(1)
- 22.701 mm(1)
- 23.3 mm(1)
- 23.901 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 25.6 mm(1)
- 26.5 mm(1)
- 27.701 mm(1)
- 28.0 mm(1)
- 28.5 mm(1)
- 29.0 mm(1)
- 29.5 mm(1)
- 30.0 mm(1)
- 30.201 mm(1)
- 30.3 mm(1)
- 30.5 mm(1)
- 31.5 mm(1)
- 32.4 mm(1)
- 32.6 mm(1)
- 33.0 mm(10)
- 33.1 mm(1)
- 33.7 mm(1)
- 34.0 mm(1)
- 34.4 mm(1)
- 34.5 mm(1)
- 34.9 mm(1)
- 35.301 mm(1)
- 35.5 mm(1)
- 35.7 mm(1)
- 36.2 mm(1)
- 36.5 mm(1)
- 37.5 mm(1)
- 37.9 mm(1)
- 38.0 mm(10)
- 38.401 mm(1)
- 38.5 mm(1)
- 39.6 mm(1)
- 40.0 mm(1)
- 40.1 mm(1)
- 40.401 mm(1)
- 40.6 mm(1)
- 40.801 mm(2)
- 41.2 mm(1)
- 41.401 mm(1)
- 41.6 mm(1)
- 41.801 mm(1)
- 42.0 mm(1)
- 42.401 mm(1)
- 42.801 mm(2)
- 42.901 mm(1)
- 43.0 mm(1)
- 43.1 mm(1)
- 43.901 mm(1)
- 44.0 mm(1)
- 44.901 mm(1)
- 45.1 mm(1)
- 45.5 mm(1)
- 46.5 mm(1)
- 46.901 mm(1)
- 47.2 mm(1)
- 47.301 mm(1)
- 47.7 mm(1)
- 48.0 mm(1)
- 48.1 mm(1)
- 48.401 mm(1)
- 48.6 mm(1)
- 49.0 mm(1)
- 49.301 mm(1)
- 49.401 mm(1)
- 49.7 mm(1)
- 50.301 mm(1)
- 50.5 mm(2)
- 50.801 mm(1)
- 51.7 mm(2)
- 52.401 mm(1)
- 52.7 mm(1)
- 53.1 mm(1)
- 53.301 mm(1)
- 53.7 mm(1)
- 54.6 mm(1)
- 55.6 mm(1)
- 55.7 mm(1)
- 56.2 mm(1)
- 56.7 mm(1)
- 57.6 mm(1)
- 59.0 mm(1)
- 59.401 mm(1)
- 59.7 mm(1)
- 61.7 mm(1)
- 63.0 mm(1)
- 64.101 mm(1)
- 64.4 mm(1)
- 65.601 mm(1)
- 66.2 mm(2)
- 66.5 mm(1)
- 66.9 mm(1)
- 68.2 mm(2)
- 69.5 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
to
Connection Style
Connection Style
- BF Drill Shank (118)
- HC Drill Sleeve with Pocket (20)
- Straight-Cylindrical (60)
- Whistle Notch 2 (24)
Number of Flutes
Number of Flutes
- 1 (32)
- 2 (198)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (95)
- 1.0 (75)
to
Over All Length [L]
Over All Length [L]
- 1.307 in(2)
- 1.331 in(4)
- 1.35 in(2)
- 1.949 in(1)
- 1.969 in(1)
- 2.165 in(8)
- 2.224 in(1)
- 2.283 in(3)
- 2.441 in(8)
- 2.598 in(10)
- 2.677 in(1)
- 2.777 in(1)
- 2.914 in(12)
- 2.953 in(10)
- 3.071 in(1)
- 3.11 in(8)
- 3.15 in(11)
- 3.169 in(1)
- 3.228 in(1)
- 3.248 in(1)
- 3.307 in(13)
- 3.446 in(12)
- 3.504 in(7)
- 3.583 in(1)
- 3.622 in(1)
- 3.701 in(1)
- 3.74 in(9)
- 3.831 in(9)
- 4.016 in(14)
- 4.061 in(2)
- 4.114 in(1)
- 4.13 in(1)
- 4.213 in(4)
- 4.252 in(1)
- 4.311 in(2)
- 4.313 in(1)
- 4.37 in(3)
- 4.449 in(1)
- 4.529 in(5)
- 4.606 in(2)
- 4.622 in(6)
- 4.63 in(1)
- 4.646 in(2)
- 4.744 in(1)
- 4.764 in(2)
- 4.803 in(1)
- 4.843 in(1)
- 5.005 in(9)
- 5.016 in(8)
- 5.118 in(1)
- 5.142 in(1)
- 5.218 in(1)
- 5.236 in(1)
- 5.394 in(1)
- 5.551 in(2)
- 5.63 in(1)
- 5.67 in(1)
- 5.75 in(1)
- 5.88 in(1)
- 6.061 in(1)
- 6.13 in(1)
- 6.311 in(1)
- 6.44 in(2)
- 6.55 in(1)
- 6.561 in(1)
- 6.625 in(1)
- 6.694 in(1)
- 7.25 in(1)
- 7.5 in(1)
to
Over All Length [L]
Over All Length [L]
- 33.2 mm(2)
- 33.801 mm(4)
- 34.301 mm(2)
- 49.5 mm(1)
- 50.0 mm(1)
- 55.0 mm(8)
- 56.5 mm(1)
- 58.0 mm(3)
- 62.0 mm(8)
- 66.0 mm(10)
- 68.0 mm(1)
- 70.5 mm(1)
- 74.0 mm(12)
- 75.0 mm(10)
- 78.0 mm(1)
- 79.0 mm(8)
- 80.0 mm(11)
- 80.5 mm(1)
- 82.0 mm(1)
- 82.5 mm(1)
- 84.0 mm(13)
- 87.5 mm(12)
- 89.0 mm(7)
- 91.0 mm(1)
- 92.0 mm(1)
- 94.0 mm(1)
- 95.0 mm(9)
- 97.301 mm(9)
- 102.0 mm(14)
- 103.125 mm(2)
- 104.5 mm(1)
- 104.9 mm(1)
- 107.0 mm(4)
- 108.0 mm(1)
- 109.476 mm(1)
- 109.5 mm(1)
- 109.551 mm(1)
- 111.0 mm(3)
- 113.0 mm(1)
- 115.0 mm(5)
- 117.0 mm(2)
- 117.4 mm(6)
- 117.601 mm(1)
- 118.0 mm(2)
- 120.5 mm(1)
- 121.0 mm(2)
- 122.0 mm(1)
- 123.0 mm(1)
- 127.101 mm(9)
- 127.4 mm(8)
- 130.0 mm(1)
- 130.6 mm(1)
- 132.5 mm(1)
- 133.0 mm(1)
- 137.0 mm(1)
- 141.0 mm(2)
- 143.0 mm(1)
- 144.0 mm(1)
- 146.05 mm(1)
- 149.35 mm(1)
- 153.925 mm(1)
- 155.701 mm(1)
- 160.275 mm(1)
- 163.576 mm(2)
- 166.375 mm(1)
- 166.625 mm(1)
- 168.275 mm(1)
- 170.0 mm(1)
- 184.15 mm(1)
- 190.5 mm(1)
to
Corner Radius
Corner Radius
- 0.037 in(3)
- 0.046 in(1)
to
Corner Radius
Corner Radius
- 0.925 mm(3)
- 1.175 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(38)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(38)
to
Application
Coating
Coating
- TiN (21)
- Uncoated (20)
Grade Of Cutting Tool
Grade Of Cutting Tool
- CD3 (46)
- CS5 (91)
- KC7015 (37)
- KC7215 (39)
- KC7315 (129)
- KC7320 (16)
- KC7410 (57)
- KCC05 (10)
- KCP15 (57)
- KCPM45 (55)
- KCU15 (80)
- KD1415 (8)
- KD1425 (5)
- KDC05 (5)
- KDC15 (5)
- KM1 (47)
- KMF (86)
- P30 (46)
Hand Of Tool
Hand Of Tool
- R (230)
Wiper Insert
Wiper Insert
- N (38)
Drill Type
Drill Type
- 81-01 (41)
- 81-05 (4)
- 86-01 (17)
- 86-04 (8)
- 86-05 (4)
- 86-09 (156)
Countersunk Angle
Countersunk Angle
- 30.0 (50)
- 41.0 (85)
- 45.0 (99)
- 50.0 (30)
- 65.0 (1)
to
Front-End
Adapter Front-End
Adapter Front-End
- HYDRAULIC CHUCK (33)
- HYDRAULIC CHUCK-SLIM LINE (10)
Cutting Width
Cutting Width
- 0.228 in(1)
- 0.24 in(1)
- 0.386 in(2)
to
Cutting Width
Cutting Width
- 5.801 mm(1)
- 6.101 mm(1)
- 9.8 mm(2)
to
Front End Type
Front End Type
- ZYL - Cylindrical Adapter (43)
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (122)
- KENTIP DRILL (57)
Front End Style
Front End Style
- ZYL01 Straight Shank (43)
Gage Length
Gage Length
- 6 in(2)
- 2.757 in(2)
- 2.953 in(5)
- 3.031 in(2)
- 3.15 in(2)
- 3.346 in(1)
- 3.543 in(5)
- 3.74 in(3)
- 3.75 in(2)
- 3.938 in(1)
- 5.906 in(7)
- 6.694 in(7)
- 7.875 in(4)
Gage Length
Gage Length
- 150 mm(7)
- 170 mm(7)
- 75 mm(5)
- 90 mm(5)
- 200 mm(4)
- 95 mm(3)
- 70 mm(2)
- 77 mm(2)
- 80 mm(2)
- 100 mm(1)
- 85 mm(1)
- 95.25 mm(2)
- 152.4 mm(2)
Point Angle
Point Angle
- 90.0 (5)
- 120.0 (5)
- 128.0 (10)
- 135.0 (101)
- 140.0 (17)
- 180.0 (17)
to
Front End Size
Front End Size
- 0.473 in(42)
- 0.5 in(1)
to
Front End Size
Front End Size
- 12.0 mm(42)
- 12.701 mm(1)
to
Insert Geometry
Shape
Shape
- COUNTERBORE/COUNTERSINK MISC (38)
Cutting Tool Material
Cutting Tool Material
- D P (6)
- H W (32)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (222)
System Size
System Size
- BT30 (1)
- BT40 (2)
- BT50 (2)
- CV40 (3)
- CV50 (3)
- DV40 (2)
- DV50 (2)
- HSK100A (3)
- HSK32C (1)
- HSK40A (2)
- HSK40C (1)
- HSK50A (1)
- HSK50C (1)
- HSK63A (3)
- HSK63C (1)
- HSK80A (1)
- KM40TS (1)
- KM4X100 (2)
- KM4X63 (3)
- KM50TS (1)
- KM63TS (2)
- KM63XMZ (1)
- PSC50 (1)
- PSC63 (1)
Back-End Diameter
Back-End Diameter
- 4.0 mm(8)
- 5.0 mm(8)
- 6.0 mm(18)
- 7.0 mm(12)
- 8.0 mm(17)
- 9.0 mm(15)
- 10.0 mm(12)
- 11.0 mm(11)
- 12.0 mm(13)
- 13.0 mm(5)
- 14.0 mm(5)
- 15.0 mm(7)
- 15.5 mm(2)
- 15.875 mm(1)
- 16.0 mm(5)
- 17.0 mm(3)
- 18.0 mm(3)
- 19.05 mm(16)
- 20.0 mm(20)
- 25.401 mm(9)
- 25.701 mm(1)
- 27.701 mm(1)
- 29.701 mm(1)
- 31.6 mm(1)
- 31.75 mm(12)
- 32.0 mm(22)
- 33.6 mm(1)
- 37.6 mm(1)
- 38.1 mm(2)
- 39.6 mm(1)
- 40.0 mm(4)
- 41.6 mm(1)
- 44.45 mm(7)
- 50.0 mm(4)
- 63.0 mm(11)
- 69.851 mm(7)
- 80.0 mm(1)
- 100.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 0.157 in(8)
- 0.197 in(8)
- 0.237 in(18)
- 0.276 in(12)
- 0.315 in(17)
- 0.354 in(15)
- 0.394 in(12)
- 0.433 in(11)
- 0.473 in(13)
- 0.512 in(5)
- 0.551 in(5)
- 0.591 in(7)
- 0.61 in(2)
- 0.625 in(1)
- 0.63 in(5)
- 0.669 in(3)
- 0.709 in(3)
- 0.75 in(16)
- 0.787 in(20)
- 1.0 in(9)
- 1.012 in(1)
- 1.091 in(1)
- 1.169 in(1)
- 1.244 in(1)
- 1.25 in(12)
- 1.26 in(22)
- 1.323 in(1)
- 1.48 in(1)
- 1.5 in(2)
- 1.559 in(1)
- 1.575 in(4)
- 1.639 in(1)
- 1.75 in(7)
- 1.969 in(4)
- 2.48 in(11)
- 2.75 in(7)
- 3.15 in(1)
- 3.938 in(5)
to
No filters matching ""
