Drilling: Stacked Plates
Drilling
Drilling: Inclined Exit
Tool Dimensions: 2flute/4margin/coolant
DIN number 6535
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 3867832 |
| ISO Catalog ID | B274Z04500HPS |
| ANSI Catalog ID | B274Z04500HPS |
| Grade | KN25 |
| [D1] Drill Diameter M | 4.5 mm |
| [D1] Drill Diameter M | .1772 in |
| [L] Overall Length | 199 mm |
| [L] Overall Length | 7.83 in |
| [L3] Flute Length | 153 mm |
| [L3] Flute Length | 6.02 in |
| [L4] Maximum Drilling Depth | 142 mm |
| [L4] Maximum Drilling Depth | 5.59 in |
| [L5] Drill Point Length | 0.831 mm |
| [L5] Drill Point Length | .033 in |
| [LS] Shank Length | 34 mm |
| [LS] Shank Length | 1.34 in |
| [D] Adapter / Shank / Bore Diameter | 5 mm |
| [D] Adapter / Shank / Bore Diameter | .1969 in |
Drilling: Stacked PlatesDrillingDrilling: Inclined ExitTool Dimensions: 2flute/4margin/coolantDIN number 6535Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°Drilling: Cross-Hole DrillingGrades
KN25
Composition: Uncoated, highly wear-resistant ultra-fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for deep-hole drilling of non-ferrous materials.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| TOLERANCE • Inch | ||||
| Drills *HPG, *SGL, *HPR | Drills *HPS | |||
| nominal size range | D1 tolerance h7 | D tolerance h6 | D1 tolerance h8 | D tolerance h6 |
| .0394 to .1181 | .0000/-.0004 | .0000/-.0002 | .0000/-.0006 | .0000/-.0002 |
| .1181 to .2362 | .0000/-.0005 | .0000/-.0003 | .0000/-.0007 | .0000/-.0003 |
| .2362 to .3937 | .0000/-.0006 | .0000/-.0004 | .0000/-.0009 | .0000/-.0004 |
| .3937 to .7087 | .0000/-.0007 | .0000/-.0004 | .0000/-.0011 | .0000/-.0004 |
| TOLERANCE • Metric | ||||
| Drills *HPG, *SGL, *HPR | Drills *HPS | |||
| nominal size range | D1 tolerance h7 | D tolerance h6 | D1 tolerance h8 | D tolerance h6 |
| .0394 to .1181 | 0,000/-0,010 | 0,000/-0,006 | 0,000/-0,014 | 0,000/-0,006 |
| .1181 to .2362 | 0,000/-0,012 | 0,000/-0,008 | 0,000/-0,018 | 0,000/-0,008 |
| .2362 to .3937 | 0,000/-0,015 | 0,000/-0,009 | 0,000/-0,022 | 0,000/-0,009 |
| .3937 to .7087 | 0,000/-0,018 | 0,000/-0,011 | 0,000/-0,027 | 0,000/-0,011 |
| Material |  |  | |||||||||||
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | .551 | 5/8 .625 | |||
| N | 1 | 390 | 660 | 980 | IPR | .005–.007 | .005–.007 | .006–.009 | .008–.011 | .010–.014 | .012–.016 | .014–.018 | .016–.020 |
| 2 | 390 | 560 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 3 | 330 | 490 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 4 | 260 | 660 | 980 | IPR | .001–.002 | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.003 | .002–.004 | |
| Material | | | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| N | 1 | 120 | 200 | 300 | mm/r | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/r | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | ||
| N | 1 | 120 | 200 | 300 | mm/r | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/r | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/r | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?