Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje
Sugestie dotyczące produktów
Product Family suggestions
Witaj, User Name
Wybrane konto:
Wystąpił problem z Twoim kontem. Skontaktuj się z działem obsługi klienta.
Konto kupującego Zmień konto
Konto odbiorcy Zmień konto
- Panel przyborów
- Zarządzaj zamówieniami
- Zarządzaj kanałami
- Książka adresowa
Powiadomienia
Oznacz wszystkie jako przeczytane- Zmień hasło
- Mój profil
- Wyloguj się
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Frezuj więcej za mniej dzięki naszym ofertom ograniczonym czasowo! Kup teraz.
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Edytuj
Dodaj
Nazwa :{{SolutionName}}- Produkty
- /
- GOmill™ GP • Square End • 2 Flutes • Plain Shank • Inch
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
GOmill™ GP • Square End • 2 Flutes • Plain Shank • Inch
General Purpose Solid Carbide End Mill
Właściwości i zalety
- Solid carbide end mill with excellent cost-benefit ratio.
- Eccentric relief increases cutting edge stability for long tool life and high surface quality.
- Eccentric relief eases regrinding and reduces reconditioning cost.
- Center cutting for plunging and ramping operations.
Zastosowania
Plunge Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Tool Dimensions: Flute Configuration: 2
Helix Angle: 30°
Corner Style: Square End
End Mill Tolerances | |||
D1 | tolerance | D | tolerance h6 + / - |
All | +.000/- .002" | ≤1/8" | +0/-.00024" |
+0/-.00031" | |||
+0/-.00035" | |||
+0/-.00043" | |||
+0/-.00051" |
Side Milling (A) and Slotting (B) | KC633M | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | ||||||||||||||||||||
A | B | Cutting Speed | D1 | |||||||||||||||||||
ap | ae | ap | Min | Max | inch | 1/64 | 1/32 | 1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||
Material | .0156 | .0313 | .0625 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||||||||
P | 0 | Ap1 max | 0.1 x D | 0.5 x D | 490 | – | 660 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
1 | Ap1 max | 0.1 x D | 0.5 x D | 490 | – | 660 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
2 | Ap1 max | 0.1 x D | 0.5 x D | 460 | – | 620 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
3 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 520 | IPT | .0001 | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
4 | Ap1 max | 0.1 x D | 0.5 x D | 300 | – | 490 | IPT | .0001 | .0002 | .0003 | .0004 | .0005 | .0007 | .0010 | .0014 | .0018 | .0020 | .0026 | .0030 | .0034 | .0039 | |
M | 1 | Ap1 max | 0.1 x D | 0.5 x D | 300 | – | 380 | IPT | .0001 | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
2 | Ap1 max | 0.1 x D | 0.5 x D | 200 | – | 260 | IPT | .0001 | .0002 | .0003 | .0004 | .0004 | .0006 | .0009 | .0012 | .0016 | .0018 | .0023 | .0027 | .0031 | .0036 | |
K | 1 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 490 | IPT | .0001 | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
2 | Ap1 max | 0.1 x D | 0.5 x D | 360 | – | 460 | IPT | .0001 | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
N | 1 | Ap1 max | 0.1 x D | 0.5 x D | 820 | – | 3250 | IPT | .0002 | .0003 | .0006 | .0008 | .0009 | .0013 | .0019 | .0025 | .0031 | .0038 | .0050 | .0063 | .0075 | .0100 |
2 | Ap1 max | 0.1 x D | 0.5 x D | 820 | – | 2450 | IPT | .0001 | .0003 | .0005 | .0006 | .0008 | .0010 | .0015 | .0020 | .0025 | .0030 | .0040 | .0050 | .0060 | .0080 | |
4 | Ap1 max | 0.1 x D | 0.5 x D | 820 | – | 2450 | IPT | .0001 | .0003 | .0006 | .0007 | .0008 | .0011 | .0017 | .0023 | .0028 | .0034 | .0045 | .0056 | .0068 | .0090 |
Side Milling (A) | KC633M | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||||||
A | Cutting Speed | D1 | |||||||||||||||||
1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||||||
Material | ap | ae | Min | Max | inch | .0156 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||
P | 0 | Ap1 max | 0.1 x D | 490 | – | 660 | IPT | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
1 | Ap1 max | 0.1 x D | 490 | – | 660 | IPT | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
2 | Ap1 max | 0.1 x D | 460 | – | 620 | IPT | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
3 | Ap1 max | 0.1 x D | 390 | – | 520 | IPT | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
4 | Ap1 max | 0.1 x D | 300 | – | 490 | IPT | .0003 | .0004 | .0005 | .0007 | .0010 | .0014 | .0018 | .0020 | .0026 | .0030 | .0034 | .0039 | |
M | 1 | Ap1 max | 0.1 x D | 300 | – | 380 | IPT | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
2 | Ap1 max | 0.1 x D | 200 | – | 260 | IPT | .0003 | .0004 | .0004 | .0006 | .0009 | .0012 | .0016 | .0018 | .0023 | .0027 | .0031 | .0036 | |
K | 1 | Ap1 max | 0.1 x D | 390 | – | 490 | IPT | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
2 | Ap1 max | 0.1 x D | 360 | – | 460 | IPT | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
N | 1 | Ap1 max | 0.1 x D | 820 | – | 3250 | IPT | .0006 | .0008 | .0009 | .0013 | .0019 | .0025 | .0031 | .0038 | .0050 | .0063 | .0075 | .0100 |
2 | Ap1 max | 0.1 x D | 820 | – | 2450 | IPT | .0005 | .0006 | .0008 | .0010 | .0015 | .0020 | .0025 | .0030 | .0040 | .0050 | .0060 | .0080 | |
4 | Ap1 max | 0.1 x D | 820 | – | 2450 | IPT | .0006 | .0007 | .0008 | .0011 | .0017 | .0023 | .0028 | .0034 | .0045 | .0056 | .0068 | .0090 |
Side Milling (A) and Slotting (B) | KC633M | Recommended feed per tooth (IPT = inch/th) for side milling (A). For slotting (B), reduce IPT by 20%. | |||||||||||||||||||
A | B | Cutting Speed | D1 | ||||||||||||||||||
1/32 | 1/16 | 5/64 | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||||||||
Material | ap | ae | ap | Min | Max | inch | .0313 | .0625 | .0781 | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | ||
P | 0 | Ap1 max | 0.1 x D | 0.5 x D | 490 | – | 660 | IPT | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
1 | Ap1 max | 0.1 x D | 0.5 x D | 490 | – | 660 | IPT | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
2 | Ap1 max | 0.1 x D | 0.5 x D | 460 | – | 620 | IPT | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
3 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 520 | IPT | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
4 | Ap1 max | 0.1 x D | 0.5 x D | 300 | – | 490 | IPT | .0002 | .0003 | .0004 | .0005 | .0007 | .0010 | .0014 | .0018 | .0020 | .0026 | .0030 | .0034 | .0039 | |
M | 1 | Ap1 max | 0.1 x D | 0.5 x D | 300 | – | 380 | IPT | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
2 | Ap1 max | 0.1 x D | 0.5 x D | 200 | – | 260 | IPT | .0002 | .0003 | .0004 | .0004 | .0006 | .0009 | .0012 | .0016 | .0018 | .0023 | .0027 | .0031 | .0036 | |
K | 1 | Ap1 max | 0.1 x D | 0.5 x D | 390 | – | 490 | IPT | .0002 | .0004 | .0005 | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
2 | Ap1 max | 0.1 x D | 0.5 x D | 360 | – | 460 | IPT | .0002 | .0004 | .0004 | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
N | 1 | Ap1 max | 0.1 x D | 0.5 x D | 820 | – | 3250 | IPT | .0003 | .0006 | .0008 | .0009 | .0013 | .0019 | .0025 | .0031 | .0038 | .0050 | .0063 | .0075 | .0100 |
2 | Ap1 max | 0.1 x D | 0.5 x D | 820 | – | 2450 | IPT | .0003 | .0005 | .0006 | .0008 | .0010 | .0015 | .0020 | .0025 | .0030 | .0040 | .0050 | .0060 | .0080 | |
4 | Ap1 max | 0.1 x D | 0.5 x D | 820 | – | 2450 | IPT | .0003 | .0006 | .0007 | .0008 | .0011 | .0017 | .0023 | .0028 | .0034 | .0045 | .0056 | .0068 | .0090 |
Side Milling (A) | KC633M | Recommended feed per tooth (IPT = inch/th) for side milling (A). | |||||||||||||||
A | Cutting Speed | D1 | |||||||||||||||
ap | ae | Min | Max | inch | 3/32 | 1/8 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | |||
Material | .0938 | .1250 | .1875 | .2500 | .3125 | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||||||
P | 0 | Ap1 max | 0.1 x D | 490 | – | 660 | IPT | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
1 | Ap1 max | 0.1 x D | 490 | – | 660 | IPT | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
2 | Ap1 max | 0.1 x D | 460 | – | 620 | IPT | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 | |
3 | Ap1 max | 0.1 x D | 390 | – | 520 | IPT | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
4 | Ap1 max | 0.1 x D | 300 | – | 490 | IPT | .0005 | .0007 | .0010 | .0014 | .0018 | .0020 | .0026 | .0030 | .0034 | .0039 | |
M | 1 | Ap1 max | 0.1 x D | 300 | – | 380 | IPT | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 |
2 | Ap1 max | 0.1 x D | 200 | – | 260 | IPT | .0004 | .0006 | .0009 | .0012 | .0016 | .0018 | .0023 | .0027 | .0031 | .0036 | |
K | 1 | Ap1 max | 0.1 x D | 390 | – | 490 | IPT | .0007 | .0009 | .0014 | .0018 | .0023 | .0027 | .0034 | .0040 | .0044 | .0049 |
2 | Ap1 max | 0.1 x D | 360 | – | 460 | IPT | .0005 | .0007 | .0011 | .0015 | .0020 | .0023 | .0029 | .0034 | .0039 | .0045 | |
N | 1 | Ap1 max | 0.1 x D | 820 | – | 3250 | IPT | .0009 | .0013 | .0019 | .0025 | .0031 | .0038 | .0050 | .0063 | .0075 | .0100 |
2 | Ap1 max | 0.1 x D | 820 | – | 2450 | IPT | .0008 | .0010 | .0015 | .0020 | .0025 | .0030 | .0040 | .0050 | .0060 | .0080 | |
4 | Ap1 max | 0.1 x D | 820 | – | 2450 | IPT | .0008 | .0011 | .0017 | .0023 | .0028 | .0034 | .0045 | .0056 | .0068 | .0090 |