Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje
Sugestie dotyczące produktów
Product Family suggestions
Witaj, User Name
Wybrane konto:
Wystąpił problem z Twoim kontem. Skontaktuj się z działem obsługi klienta.
Konto kupującego Zmień konto
Konto odbiorcy Zmień konto
- Panel przyborów
- Zarządzaj zamówieniami
- Zarządzaj kanałami
- Książka adresowa
Powiadomienia
Oznacz wszystkie jako przeczytane- Zmień hasło
- Mój profil
- Wyloguj się
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Frezuj więcej za mniej dzięki naszym ofertom ograniczonym czasowo! Kup teraz.
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Edytuj
Dodaj
Nazwa :{{SolutionName}}- Produkty
- /
- Narzędzia do obróbki skrawaniem
- /
- Frezowanie
- /
- Monolityczne frezy trzpieniowe
- /
- Wysokowydajne monolityczne frezy trzpieniowe z węglików spiekanych
- /
- KOR5™ • Wysokowydajne monolityczne frezy trzpieniowe z węglików spiekanych
- /
- KOR5 DA
- /
- KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch
KOR5™ DA Solid Carbide End Mill for Dynamic Milling of Aluminum
Właściwości i zalety
- Designed for trochoidal milling with low radial engagement and full length of cut.
- With chip splitters for ideal chip evacuation.
- Proprietary flute form reduces vibrations and improves tool life.
- Helix angle tailored to minimize vibration and optimize tool life.
- Front end geometry designed for maximum tool life in helical and ramping operations.
Zastosowania
Trochoidal Milling
Through Coolant - Solid End Mill
Ramping: 4°
Tool Dimensions: Flute Configuration: 5
Shank - Cylindrical Plain
Helix Angle: 35°
Corner Style: Corner Radius
Corner Style: Square End
Side Milling/Shoulder Milling: Roughing
Side Milling/Shoulder Milling: Finishing
Ae/D1 | 2% | 5% | 10% | 20% | 30% | 40% | 50% | 100% |
Max Ap | Ap1 Max | Ap1 Max | Ap1 Max | Ap1 Max | 2 x D1 | 1 x D1 | .5 x D1 | .25 x D1 |
Feed Multiplier | 3.60 | 2.30 | 1.70 | 1.25 | 1.09 | 1.02 | 1.00 | .90 |
Ae/D1 | 2% | 5% | 10% | 20% | 30% | 40% | 50% | 100% |
Max Ap | Ap1 Max | Ap1 Max | Ap1 Max | Ap1 Max | 2 x D1 | 1 x D1 | 0,5 x D1 | 0,25 x D1 |
Feed Multiplier (KFz) | 3,60 | 2,30 | 1,70 | 1,25 | 1,09 | 1,02 | 1,00 | 0,90 |
Side Milling (A) and Slotting (B) | K600 | Recommended feed per tooth (IPT = inch/th) | |||||||||||
D1 | |||||||||||||
Material | A | B | Cutting Speed | frac. | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||||
ap | ae | ap | min | max | dec. | .3750 | .5000 | .6250 | .7500 | 1.0000 | |||
N | 1 | 0.5 x D1 | 0.5 x D1 | 0.25 x D1 | 640 | – | 6560 | IPT | 0.0030 | 0.0050 | 0.0060 | 0.0080 | 0.0090 |
2 | 0.5 x D1 | 0.5 x D1 | 0.25 x D1 | 640 | – | 4920 | IPT | 0.0025 | 0.0045 | 0.0055 | 0.0070 | 0.0085 |
Material | K600 | Recommended feed per tooth (fz = mm/th) | |||||||||||
A | B | Cutting Speed | D1 | ||||||||||
ap | ae | ap | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||
N | 1 | 0,5 x D1 | 0,5 x D1 | 0,25 x D1 | 200 | – | 2000 | fz | 0,080 | 0,120 | 0,160 | 0,200 | 0,225 |
2 | 0,5 x D1 | 0,5 x D1 | 0,25 x D1 | 200 | – | 1500 | fz | 0,070 | 0,110 | 0,140 | 0,180 | 0,213 |
KOR™ Series End Mills: Solid End Mills for Dynamic Milling