Witamy
Potwierdź swoje preferencje
Aktualizuj preferencje
Sugestie dotyczące produktów
Product Family suggestions
Witaj, Zaloguj się
Wybrane konto:
Wystąpił problem z Twoim kontem. Skontaktuj się z działem obsługi klienta.
Konto kupującego Zmień konto
Konto odbiorcy Zmień konto
- Zarządzaj zamówieniami
- Zarządzaj kanałami
Powiadomienia
Oznacz wszystkie jako przeczytane- Zmień hasło
- Mój profil
- Wyloguj się
Pozycje pomyślnie dodano do koszyka
Wyświetl koszyk
Wyświetl koszyk
Pozycje are being added to the cart
Wyświetl koszyk
Wyświetl koszyk
Podnieś swoją wydajność za mniej dzięki naszym ofertom ograniczonym czasowo! Kup teraz
- Produkty
- /
- Narzędzia do obróbki skrawaniem
- /
- Toczenie
- /
- Obróbka rowków i przecinanie
- /
- Obróbka rowków czołowych
- /
- A4™ • Dwustronna obróbka rowków
A4™ • Dwustronna obróbka rowków
Wybierz filtry
Filtry
Filtry
Wyświetl filtry w
Metryczne
Calowe
keyFilters
Workpiece Material
Workpiece Material
- P Steel (861)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(861)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(861)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(861)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(861)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(861)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(861)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(861)
- M Stainless Steel (788)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(788)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(788)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(788)
- K Cast Iron (844)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(844)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(835)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(823)
- N Non-Ferrous Materials (796)
- N1Wrought Aluminum (796)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(787)
- N3High-Silicon Aluminum Alloys Si >12.2%(69)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (796)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (787)
- N6Carbon, Graphite Composites, CFRP (787)
- N7MMC's (69)
- S High-Temp Alloys (805)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(805)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(805)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(805)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(792)
- H Hardened Materials (425)
- H1Hardened Materials 44-48 HRC(425)
- H2Hardened Materials 48-55 HRC(367)
- H3Hardened Materials 56-60 HRC(93)
- H4Hardened Materials >60 HRC(93)
Select First Choice
- BR (39)
- CN (157)
- DE (157)
- GB (106)
- IN (105)
- SG (107)
- US (158)
Applications
Applications
Back Boring (112)
Boring (491)
Cut-Off (189)
Deep Grooving (34)
Face Grooving (694)
Facing (116)
Grooving (611)
ID Facing (112)
ID Grooving (491)
Multiple Direction Cutting (142)
Plunge Turning (383)
Profiling (107)
Turning (126)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (513)
- Lightly Interrupted Cut (648)
- Smooth Cut (837)
- Varying Depth of Cut (815)
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (142)
Tool Cutting Edge Angle MinWprowadź wartośćdoTool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- Boring Bar Shank (11)
- Toolholder (20)
=
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (27)
- 2.0 (774)
Cutting Edges Per Insert MinWprowadź wartośćdoCutting Edges Per Insert MaxCutting Edges Per Insert
=
Over All Length [L]
Over All Length [L]
- 2.077 in(31)
- 2.156 in(43)
- 2.269 in(21)
- 2.352 in(14)
- 4.921 in(3)
- 4.933 in(7)
- 5.0 in(2)
- 5.463 in(2)
- 5.508 in(6)
- 5.906 in(7)
- 5.915 in(2)
- 5.961 in(4)
- 6.0 in(11)
- 6.25 in(2)
- 6.694 in(1)
- 6.703 in(2)
- 7.0 in(2)
- 7.931 in(7)
- 8.012 in(4)
Over All Length [L] MinWprowadź wartośćdoOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 52.75 mm(31)
- 54.75 mm(43)
- 57.625 mm(21)
- 59.75 mm(14)
- 125.0 mm(3)
- 125.301 mm(7)
- 127.0 mm(2)
- 138.75 mm(2)
- 139.9 mm(6)
- 150.0 mm(7)
- 150.25 mm(2)
- 151.4 mm(4)
- 152.4 mm(11)
- 158.75 mm(2)
- 170.0 mm(1)
- 170.25 mm(2)
- 177.8 mm(2)
- 201.451 mm(7)
- 203.5 mm(4)
Over All Length [L] MinWprowadź wartośćdoOver All Length [L] MaxOver All Length [L]
cornerConfiguration
≈
Corner Radius
Corner Radius
- 0.006 in(11)
- 0.008 in(259)
- 0.016 in(313)
- 0.031 in(232)
- 0.039 in(45)
- 0.041 in(26)
- 0.047 in(60)
- 0.048 in(10)
- 0.06 in(68)
- 0.063 in(39)
- 0.079 in(33)
- 0.08 in(30)
- 0.094 in(28)
- 0.098 in(32)
- 0.099 in(28)
- 0.119 in(28)
- 0.12 in(25)
- 0.125 in(26)
- 0.156 in(8)
- 0.157 in(14)
- 0.158 in(16)
- 0.188 in(6)
- 0.197 in(8)
- 0.198 in(11)
Corner Radius MinWprowadź wartośćdoCorner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.151 mm(11)
- 0.2 mm(259)
- 0.4 mm(313)
- 0.8 mm(232)
- 1.0 mm(45)
- 1.05 mm(26)
- 1.201 mm(60)
- 1.225 mm(10)
- 1.5 mm(56)
- 1.526 mm(41)
- 1.6 mm(39)
- 2.0 mm(33)
- 2.025 mm(30)
- 2.375 mm(28)
- 2.5 mm(32)
- 2.526 mm(28)
- 3.0 mm(28)
- 3.026 mm(25)
- 3.176 mm(26)
- 3.975 mm(8)
- 4.0 mm(14)
- 4.025 mm(16)
- 4.775 mm(6)
- 5.0 mm(8)
- 5.025 mm(11)
Corner Radius MinWprowadź wartośćdoCorner Radius MaxCorner Radius
=
Corner Chamfer
Corner Chamfer
- 0.0 mm(872)
Corner Chamfer MinWprowadź wartośćdoCorner Chamfer MaxCorner Chamfer
=
Corner Chamfer
Corner Chamfer
- 0.0 in(872)
Corner Chamfer MinWprowadź wartośćdoCorner Chamfer MaxCorner Chamfer
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (99)
- KB1630 (89)
- KBH20 (84)
- KC5010 (168)
- KC5025 (178)
- KC9125 (20)
- KCK20 (96)
- KCP10 (143)
- KCP25 (144)
- KCU10 (242)
- KCU10B (254)
- KCU25 (287)
- KCU25B (300)
- KD1405 (69)
- KMS (29)
- KT315 (89)
- KY3500 (98)
- KYS30 (41)
Hand Of Tool
Hand Of Tool
- L (5)
- N (10)
- R (16)
Wiper Insert
Wiper Insert
- N (792)
=
F Dimension
F Dimension
- 8.175 mm(1)
- 8.225 mm(2)
- 9.75 mm(1)
- 10.226 mm(1)
- 10.25 mm(1)
- 12.726 mm(3)
- 13.025 mm(2)
- 19.25 mm(2)
- 20.201 mm(7)
- 25.401 mm(1)
- 25.576 mm(1)
- 27.901 mm(1)
- 30.401 mm(1)
- 30.8 mm(1)
- 33.1 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.901 mm(1)
- 39.1 mm(2)
F Dimension MinWprowadź wartośćdoF Dimension MaxF Dimension
=
F Dimension
F Dimension
- 0.322 in(1)
- 0.324 in(2)
- 0.384 in(1)
- 0.403 in(1)
- 0.404 in(1)
- 0.501 in(3)
- 0.513 in(2)
- 0.758 in(2)
- 0.795 in(7)
- 1.0 in(1)
- 1.008 in(1)
- 1.098 in(1)
- 1.197 in(1)
- 1.213 in(1)
- 1.303 in(1)
- 1.383 in(1)
- 1.395 in(1)
- 1.532 in(1)
- 1.539 in(2)
F Dimension MinWprowadź wartośćdoF Dimension MaxF Dimension
=
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(4)
- 17.0 mm(3)
- 20.0 mm(6)
- 21.0 mm(3)
- 25.0 mm(10)
- 26.0 mm(5)
- 36.0 mm(5)
- 38.0 mm(1)
- 42.0 mm(5)
- 48.0 mm(3)
- 50.0 mm(3)
- 52.0 mm(3)
- 58.0 mm(4)
- 60.0 mm(4)
- 64.0 mm(4)
- 68.0 mm(4)
- 70.0 mm(7)
- 80.0 mm(7)
- 90.0 mm(8)
- 92.0 mm(3)
- 100.0 mm(4)
- 120.0 mm(13)
- 130.0 mm(4)
- 132.0 mm(4)
- 184.0 mm(3)
- 200.0 mm(8)
- 250.0 mm(6)
- 290.0 mm(8)
Minimum Axial Groove Diameter MinWprowadź wartośćdoMinimum Axial Groove Diameter MaxMinimum Axial Groove Diameter
=
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.63 in(4)
- 0.669 in(3)
- 0.787 in(6)
- 0.828 in(3)
- 0.984 in(10)
- 1.024 in(5)
- 1.417 in(5)
- 1.496 in(1)
- 1.655 in(5)
- 1.891 in(3)
- 1.969 in(3)
- 2.047 in(3)
- 2.283 in(4)
- 2.362 in(4)
- 2.52 in(4)
- 2.677 in(4)
- 2.757 in(7)
- 3.15 in(7)
- 3.543 in(8)
- 3.622 in(3)
- 3.938 in(4)
- 4.724 in(13)
- 5.118 in(4)
- 5.197 in(4)
- 7.244 in(3)
- 7.875 in(8)
- 9.843 in(6)
- 11.417 in(8)
Minimum Axial Groove Diameter MinWprowadź wartośćdoMinimum Axial Groove Diameter MaxMinimum Axial Groove Diameter
=
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(4)
- 0.828 in(3)
- 0.906 in(1)
- 0.984 in(6)
- 1.024 in(2)
- 1.379 in(2)
- 1.417 in(13)
- 1.811 in(1)
- 1.891 in(4)
- 2.126 in(2)
- 2.283 in(4)
- 2.52 in(3)
- 2.835 in(3)
- 2.914 in(3)
- 3.307 in(4)
- 3.701 in(4)
- 3.938 in(8)
- 4.409 in(4)
- 4.882 in(3)
- 5.354 in(4)
- 5.906 in(3)
- 6.299 in(4)
- 7.875 in(2)
- 8.346 in(4)
- 10.0 in(4)
- 11.811 in(12)
- 39.331 in(11)
Maximum Axial Groove Diameter MinWprowadź wartośćdoMaximum Axial Groove Diameter MaxMaximum Axial Groove Diameter
=
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 25.0 mm(6)
- 26.0 mm(2)
- 35.0 mm(2)
- 36.0 mm(13)
- 46.0 mm(1)
- 48.0 mm(4)
- 54.0 mm(2)
- 58.0 mm(4)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(8)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 200.0 mm(2)
- 212.0 mm(4)
- 254.0 mm(4)
- 300.0 mm(12)
- 999.0 mm(11)
Maximum Axial Groove Diameter MinWprowadź wartośćdoMaximum Axial Groove Diameter MaxMaximum Axial Groove Diameter
Cutting Direction
Cutting Direction
- E (21)
- S (10)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (10)
=
Maximum Bore Depth
Maximum Bore Depth
- 2.5 in(1)
- 2.52 in(2)
- 3.0 in(1)
- 3.15 in(2)
- 3.938 in(3)
- 4.0 in(2)
Maximum Bore Depth MinWprowadź wartośćdoMaximum Bore Depth MaxMaximum Bore Depth
=
Maximum Bore Depth
Maximum Bore Depth
- 63.5 mm(1)
- 64.0 mm(2)
- 76.2 mm(1)
- 80.0 mm(2)
- 100.0 mm(3)
- 101.601 mm(2)
Maximum Bore Depth MinWprowadź wartośćdoMaximum Bore Depth MaxMaximum Bore Depth
Boring Bar Material
Boring Bar Material
- S (11)
frontEnd
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (3)
Clamp Style
Clamp Style
- Y (142)
=
Cutting Width
Cutting Width
- 0.06 in(11)
- 0.079 in(71)
- 0.084 in(69)
- 0.094 in(2)
- 0.095 in(3)
- 0.098 in(8)
- 0.104 in(5)
- 0.119 in(91)
- 0.12 in(31)
- 0.122 in(54)
- 0.123 in(100)
- 0.125 in(56)
- 0.157 in(73)
- 0.161 in(44)
- 0.162 in(75)
- 0.187 in(41)
- 0.197 in(61)
- 0.201 in(29)
- 0.202 in(70)
- 0.237 in(51)
- 0.241 in(77)
- 0.25 in(41)
- 0.312 in(10)
- 0.313 in(10)
- 0.315 in(30)
- 0.32 in(45)
- 0.375 in(13)
- 0.394 in(16)
- 0.399 in(32)
Cutting Width MinWprowadź wartośćdoCutting Width MaxCutting Width
=
Cutting Width
Cutting Width
- 1.5 mm(11)
- 2.0 mm(71)
- 2.125 mm(69)
- 2.375 mm(2)
- 2.401 mm(3)
- 2.5 mm(8)
- 2.625 mm(5)
- 3.0 mm(91)
- 3.051 mm(31)
- 3.1 mm(54)
- 3.125 mm(100)
- 3.176 mm(56)
- 4.0 mm(73)
- 4.101 mm(44)
- 4.125 mm(75)
- 4.75 mm(41)
- 5.0 mm(61)
- 5.101 mm(29)
- 5.125 mm(70)
- 6.0 mm(51)
- 6.125 mm(77)
- 6.351 mm(41)
- 7.926 mm(10)
- 7.95 mm(10)
- 8.0 mm(30)
- 8.125 mm(45)
- 9.525 mm(13)
- 10.0 mm(16)
- 10.125 mm(32)
Cutting Width MinWprowadź wartośćdoCutting Width MaxCutting Width
Front End Type
Front End Type
- MCS - Modular Cartridge System (3)
Insert Shape
Insert Shape
- PRISMATIC (903)
Cartridge Size
Cartridge Size
- 50 (90)
- 65 (21)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (3)
Insert Size
Insert Size
- 2S (11)
- 3 (3)
- 3S (8)
- 4 (2)
- 4S (1)
- 5 (1)
- 5S (1)
- 6 (3)
- 8 (1)
=
Maximum Cutting Depth
Maximum Cutting Depth
- 0.197 in(3)
- 0.276 in(2)
- 0.354 in(1)
- 0.433 in(4)
- 0.473 in(37)
- 0.551 in(58)
- 0.748 in(16)
- 0.946 in(21)
Maximum Cutting Depth MinWprowadź wartośćdoMaximum Cutting Depth MaxMaximum Cutting Depth
=
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(3)
- 7.0 mm(2)
- 9.0 mm(1)
- 11.0 mm(4)
- 12.0 mm(37)
- 14.0 mm(58)
- 19.0 mm(16)
- 24.0 mm(21)
Maximum Cutting Depth MinWprowadź wartośćdoMaximum Cutting Depth MaxMaximum Cutting Depth
Gage Length
Gage Length
- 6 in(4)
- 7 in(2)
- 2.303 in(1)
- 2.5 in(2)
- 5.439 in(1)
- 5.463 in(2)
- 5.482 in(2)
- 5.508 in(6)
- 5.529 in(4)
- 5.533 in(3)
- 5.906 in(2)
- 6.25 in(2)
- 6.271 in(2)
- 6.694 in(1)
Gage Length
Gage Length
- 150 mm(2)
- 170 mm(1)
- 58.5 mm(1)
- 63.5 mm(2)
- 138.15 mm(1)
- 138.75 mm(2)
- 139.25 mm(2)
- 139.9 mm(6)
- 140.4 mm(4)
- 140.55 mm(3)
- 152.4 mm(4)
- 158.75 mm(2)
- 159.25 mm(2)
- 177.8 mm(2)
=
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 1.651 mm(8)
- 1.75 mm(6)
- 1.901 mm(13)
- 2.0 mm(40)
- 2.475 mm(7)
- 2.5 mm(3)
- 2.575 mm(8)
- 2.725 mm(6)
- 2.901 mm(18)
- 3.0 mm(20)
- 3.301 mm(12)
- 3.401 mm(68)
- 3.45 mm(8)
- 3.5 mm(45)
- 3.526 mm(6)
- 3.6 mm(6)
- 3.801 mm(7)
- 4.075 mm(7)
- 4.101 mm(14)
- 4.15 mm(8)
- 4.2 mm(55)
- 4.4 mm(11)
- 4.5 mm(18)
- 4.601 mm(1)
- 4.75 mm(10)
- 4.801 mm(7)
- 4.9 mm(54)
- 5.0 mm(1)
- 5.301 mm(6)
- 5.9 mm(12)
- 6.0 mm(22)
- 6.101 mm(6)
- 6.25 mm(4)
- 6.351 mm(2)
- 6.4 mm(27)
- 6.5 mm(8)
- 7.301 mm(2)
- 7.95 mm(5)
- 8.1 mm(13)
- 8.201 mm(5)
Maximum Cutting Insert Depth MinWprowadź wartośćdoMaximum Cutting Insert Depth MaxMaximum Cutting Insert Depth
=
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.065 in(8)
- 0.069 in(6)
- 0.075 in(13)
- 0.079 in(40)
- 0.097 in(7)
- 0.098 in(3)
- 0.101 in(8)
- 0.107 in(6)
- 0.114 in(18)
- 0.119 in(20)
- 0.13 in(12)
- 0.134 in(68)
- 0.136 in(8)
- 0.138 in(45)
- 0.139 in(6)
- 0.143 in(6)
- 0.15 in(7)
- 0.16 in(7)
- 0.161 in(14)
- 0.163 in(8)
- 0.165 in(55)
- 0.174 in(11)
- 0.177 in(18)
- 0.181 in(1)
- 0.187 in(10)
- 0.189 in(7)
- 0.193 in(54)
- 0.197 in(1)
- 0.209 in(6)
- 0.232 in(12)
- 0.237 in(22)
- 0.24 in(6)
- 0.246 in(4)
- 0.25 in(2)
- 0.252 in(27)
- 0.256 in(8)
- 0.288 in(2)
- 0.313 in(5)
- 0.319 in(13)
- 0.323 in(5)
Maximum Cutting Insert Depth MinWprowadź wartośćdoMaximum Cutting Insert Depth MaxMaximum Cutting Insert Depth
=
Minimum Groove Diameter
Minimum Groove Diameter
- 2.757 in(3)
- 3.543 in(2)
- 4.724 in(5)
Minimum Groove Diameter MinWprowadź wartośćdoMinimum Groove Diameter MaxMinimum Groove Diameter
=
Minimum Groove Diameter
Minimum Groove Diameter
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(5)
Minimum Groove Diameter MinWprowadź wartośćdoMinimum Groove Diameter MaxMinimum Groove Diameter
insertGeometry
Shape
Shape
- PRISMATIC (761)
Insert Seat Size
Insert Seat Size
- 1 (11)
- 10 (49)
- 2 (52)
- 2B (18)
- 2S (14)
- 3 (139)
- 3S (24)
- 4 (135)
- 4S (14)
- 5 (94)
- 5S (16)
- 6 (124)
- 8 (71)
Cutting Tool Material
Cutting Tool Material
- B H (89)
- B L (84)
- C N (102)
- D P (69)
- H T (89)
- H W (865)
backEnd
Connection Type
Connection Type
- BORING BAR (11)
- SQUARE SHANK (20)
System Size
System Size
- KM63XMZ (3)
=
Back-End Diameter
Back-End Diameter
- 15.875 mm(1)
- 16.0 mm(2)
- 19.05 mm(1)
- 20.0 mm(2)
- 25.0 mm(3)
- 25.401 mm(2)
- 63.0 mm(3)
Back-End Diameter MinWprowadź wartośćdoBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.625 in(1)
- 0.63 in(2)
- 0.75 in(1)
- 0.787 in(2)
- 0.984 in(3)
- 1.0 in(2)
- 2.48 in(3)
Back-End Diameter MinWprowadź wartośćdoBack-End Diameter MaxBack-End Diameter
=
Shank Height
Shank Height
- 0.75 in(2)
- 0.787 in(10)
- 0.984 in(4)
- 1.0 in(4)
Shank Height MinWprowadź wartośćdoShank Height MaxShank Height
=
Shank Height
Shank Height
- 19.05 mm(2)
- 20.0 mm(10)
- 25.0 mm(4)
- 25.401 mm(4)
Shank Height MinWprowadź wartośćdoShank Height MaxShank Height
=
Shank Width
Shank Width
- 0.75 in(2)
- 0.787 in(10)
- 0.984 in(4)
- 1.0 in(4)
Shank Width MinWprowadź wartośćdoShank Width MaxShank Width
=
Shank Width
Shank Width
- 19.05 mm(2)
- 20.0 mm(10)
- 25.0 mm(4)
- 25.401 mm(4)
Shank Width MinWprowadź wartośćdoShank Width MaxShank Width
No filters matching ""
