+0
Drilling
Drilling: Inclined Exit
Drilling: Stacked Plates
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 6783014 |
| Nr katalogowy ISO | B254A06350HPR |
| Nr katalogowy ANSI | B254A06350HPR |
| Grade | KCK10A |
| [D1] Drill Diameter M | 6.35 mm |
| [D1] Drill Diameter M | 0.25 in |
| [D1] Wire Size | E |
| [L] Overall Length | 79 mm |
| [L] Overall Length | 3.1102 in |
| [L3] Flute Length | 34 mm |
| [L3] Flute Length | 1.3386 in |
| [L4] Maximum Drilling Depth | 24 mm |
| [L4] Maximum Drilling Depth | 0.9449 in |
| [L5] Drill Point Length | 1.59 mm |
| [L5] Drill Point Length | 0.0626 in |
| [LS] Shank Length | 36 mm |
| [LS] Shank Length | 1.4173 in |
| [D] Adapter / Shank / Bore Diameter | 8 mm |
| [D] Adapter / Shank / Bore Diameter | 0.315 in |
DrillingDrilling: Inclined ExitDrilling: Stacked PlatesDrilling: Cross-Hole DrillingGatunki
KCK10A
Composition: Multilayered PVD AlTiN-based coated submicron grain carbide with superior surface finish.
Application: First choice for cast iron. This grade utilizes a newly developed coating combined with a state-of-the-art surface condition to offer extraordinary wear resistance in abrasive materials at elevated cutting conditions with improved performance consistency.
Złóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| zakres rozmiarów nominalnych | D1 tolerancja m7 | D tolerancja h6 |
| 1–3 | 0,002/0,012 | 0,000/–0,006 |
| 0,004/0,016 | 0,000/–0,008 | |
| 0,006/0,021 | 0,000/–0,009 | |
| 0,007/0,025 | 0,000/–0,011 | |
| 0,008/0,029 | 0,000/–0,013 |
| zakres rozmiarów nominalnych | D1 tolerancja m7 | D tolerancja h6 |
| 0,0394–0,1181 | 0,0001/0,0005 | 0,0000/–0,0002 |
| 0,0002/0,0006 | 0,0000/–0,0003 | |
| 0,0002/0,0008 | 0,0000/–0,0004 | |
| 0,0003/0,0010 | 0,0000/–0,0004 | |
| 0,0003/0,0011 | 0,0000/–0,0005 |
| Grupa materiałowa |  |  | |||||||||||
| Prędkość skrawania | Metryczne | ||||||||||||
| Zakres prędkości skrawania | Zalecane posuwy na obrót | ||||||||||||
| Min. | Wartość początkowa | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| K | 1 | 130 | 160 | 210 | mm/obr. | 0,12 | 0,14 | 0,16 | 0,22 | 0,30 | 0,34 | 0,38 | 0,42 |
| 2 | 90 | 130 | 180 | mm/obr. | 0,12 | 0,14 | 0,16 | 0,22 | 0,30 | 0,34 | 0,38 | 0,42 | |
| 3 | 70 | 90 | 130 | mm/obr. | 0,11 | 0,12 | 0,22 | 0,24 | 0,26 | 0,28 | 0,30 | 0,34 | |
| Grupa materiałowa | | | |||||||||||
| Prędkość skrawania | Calowe | ||||||||||||
| Zakres prędkości skrawania [SFM] | Zalecane posuwy na obrót | ||||||||||||
| Min. | Wartość początkowa | Maks. | 1/8 0,125 | 3/16 0,188 | 1/4 0,250 | 5/16 0,313 | 3/8 0,375 | 1/2 0,500 | 5/8 0,625 | 3/4 0,750 | |||
| K | 1 | 430 | 520 | 690 | Cale/obrót | 0,005 | 0,006 | 0,006 | 0,009 | 0,012 | 0,013 | 0,015 | 0,017 |
| 2 | 300 | 430 | 590 | Cale/obrót | 0,005 | 0,006 | 0,006 | 0,009 | 0,012 | 0,013 | 0,015 | 0,017 | |
| 3 | 230 | 300 | 430 | Cale/obrót | 0,004 | 0,005 | 0,009 | 0,009 | 0,010 | 0,011 | 0,012 | 0,013 | |
| Application Data B/K25_HPR Series Grade KCK10A • Through Coolant • Metric | |||||||||||
| Prędkość skrawania | Zalecana wartość prędkości posuwu w zależności od średnicy (fn) = mm/obr. | ||||||||||
| Grupa materiałowa | Min. | Wartość początkowa | Maks. | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 |
| P | |||||||||||
| P0 | 140 | 240 | 290 | 0.13 | 0.14 | 0.16 | 0.18 | 0.19 | 0.21 | 0.25 | 0.28 |
| P1 | 130 | 240 | 290 | 0.15 | 0.16 | 0.18 | 0.2 | 0.22 | 0.24 | 0.28 | 0.32 |
| P2 | 190 | 230 | 270 | 0.14 | 0.15 | 0.18 | 0.21 | 0.24 | 0.27 | 0.33 | 0.39 |
| P3 | 130 | 160 | 190 | 0.15 | 0.17 | 0.2 | 0.23 | 0.27 | 0.3 | 0.36 | 0.43 |
| P4 | 110 | 150 | 170 | 0.14 | 0.16 | 0.19 | 0.23 | 0.26 | 0.3 | 0.37 | 0.44 |
| P5 | 70 | 90 | 110 | 0.12 | 0.13 | 0.16 | 0.19 | 0.21 | 0.24 | 0.3 | 0.35 |
| P6 | 60 | 80 | 100 | 0.12 | 0.13 | 0.16 | 0.19 | 0.21 | 0.24 | 0.3 | 0.35 |
| K | |||||||||||
| K1 | 130 | 160 | 210 | 0.12 | 0.15 | 0.21 | 0.26 | 0.3 | 0.34 | 0.41 | 0.47 |
| K2 | 90 | 130 | 180 | 0.12 | 0.15 | 0.21 | 0.26 | 0.3 | 0.34 | 0.41 | 0.47 |
| K3 | 70 | 100 | 130 | 0.1 | 0.13 | 0.18 | 0.23 | 0.27 | 0.31 | 0.37 | 0.43 |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?