Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: Stacked Plates
Tool Dimensions: 2flute/4margin/X/cool
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Shank - Cylindrical Plain ≤h6
Helix Angle: 0°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Nr materiału | 1198665 |
| Nr katalogowy ISO | B411A13000 |
| Nr katalogowy ANSI | B411A13000 |
| Grade | KF1 |
| [D1] Drill Diameter M | 13 mm |
| [D1] Drill Diameter M | .5118 in |
| [L] Overall Length | 124 mm |
| [L] Overall Length | 4.881 in |
| [L3] Flute Length | 77 mm |
| [L3] Flute Length | 3.031 in |
| [L4] Maximum Drilling Depth | 60 mm |
| [L4] Maximum Drilling Depth | 2.362 in |
| [L5] Drill Point Length | 3.031 mm |
| [L5] Drill Point Length | .1193 in |
| [LS] Shank Length | 45 mm |
| [LS] Shank Length | 1.771 in |
| [D] Adapter / Shank / Bore Diameter | 14 mm |
| [D] Adapter / Shank / Bore Diameter | .5512 in |
DrillingDrilling: Inclined EntryDrilling: Inclined ExitDrilling: Stacked PlatesTool Dimensions: 2flute/4margin/X/coolDIN number 6535DIN number 6537Drilling - Through CoolantShank - Cylindrical Plain ≤h6Helix Angle: 0°Drilling: Cross-Hole DrillingZłóż nowe rozwiązanie aby obliczyc parametry posuwu i prędkości
Po złóżeniu rozwiązania wybierz ikonę "Posuwy i prędkości" a system pokaże rekomendowane wartości. Możesz doprecyzować wyniki dodając maszynę i jej specyfikacje lub zmień wartości początkowe Używając suwaki.
| Tolerance • Metric | ||
| nominal size range | D1 tolerance k6 | D tolerance h6 |
| 0,001/0,009 | 0,000/-0,008 | |
| 0,001/0,010 | 0,000/-0,009 | |
| 0,001/0,012 | 0,000/-0,011 | |
| 0,002/0,015 | 0,000/-0,013 | |
| Tolerance • Inch | ||
| nominal size range | D1 tolerance k6 | D tolerance h6 |
| .0000/.0004 | .0000/-.0003 | |
| .0000/.0004 | .0000/-.0004 | |
| .0000/.0005 | .0000/-.0004 | |
| .0000/.0006 | .0000/-.0005 | |
| short | long | extra long | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | |||||||
| D1 | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| -1.40 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| -1.90 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| -2.30 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| -2.99 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| -3.75 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| -4.75 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| -6.00 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| -7.00 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| -8.00 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| -10.00 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| -12.00 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| -14.00 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| -16.00 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| -18.00 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| -20.00 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| -22.00 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| -25.00 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| Material |  |  | ||||||||||||
| Cutting Speed | Metric | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | |||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | |||
| K | 1 | 115 | 120 | 140 | mm/r | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/r | 0,12–0,25 | 0,13–0,29 | 0,16–0,35 | 0,20–0,42 | 0,26–0,50 | 0,32–0,57 | 0,36–0,69 | 0,42–0,82 | 0,59–0,96 |
| 2 | 200 | 250 | 300 | mm/r | 0,13–0,21 | 0,14–0,26 | 0,16–0,32 | 0,20–0,37 | 0,27–0,44 | 0,32–0,52 | 0,38–0,64 | 0,44–0,78 | 0,60–0,96 | |
| 3 | 100 | 150 | 300 | mm/r | 0,11–0,18 | 0,12–0,20 | 0,15–0,24 | 0,18–0,30 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 | |
| 4 | 100 | 170 | 250 | mm/r | 0,10–0,16 | 0,12–0,20 | 0,14–0,26 | 0,16–0,28 | 0,18–0,32 | 0,20–0,36 | 0,22–0,40 | 0,24–0,44 | 0,28–0,50 | |
| Material | | | ||||||||||||
| Material | Cutting Speed | Inch | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | |||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | 1/1 1.000 | |||
| K | 1 | 380 | 390 | 460 | IPR | .004–.008 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .012–.021 | .013–.026 | .016–.030 |
| N | 1 | 330 | 820 | 1480 | IPR | .005–.010 | .005–.011 | .006–.014 | .008–.017 | .010–.020 | .013–.022 | .014–.027 | .017–.032 | .023–.038 |
| 2 | 660 | 820 | 980 | IPR | .005–.008 | .006–.010 | .006–.013 | .008–.015 | .011–.017 | .013–.021 | .015–.025 | .017–.031 | .024–.038 | |
| 3 | 330 | 490 | 980 | IPR | .004–.007 | .005–.008 | .006–.009 | .007–.012 | .008–.015 | .009–.017 | .012–.021 | .013–.026 | .016–.030 | |
| 4 | 330 | 560 | 820 | IPR | .004–.006 | .005–.008 | .006–.010 | .006–.011 | .007–.013 | .008–.014 | .009–.016 | .009–.017 | .011–.020 | |
| | |||||||||||||
| Cutting Speed | Metric | |||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | |||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | 25,4 | ||
| K | 1 | 115 | 60 | 140 | mm/dev | 0,11–0,20 | 0,12–0,24 | 0,15–0,28 | 0,18–0,33 | 0,20–0,38 | 0,23–0,44 | 0,30–0,53 | 0,34–0,65 | 0,40–0,76 |
| N | 1 | 100 | 250 | 450 | mm/dev | 0,16–0,25 | 0,19–0,29 | 0,23–0,35 | 0,27–0,42 | 0,31–0,50 | 0,36–0,57 | 0,44–0,69 | 0,52–0,82 | 0,62–0,96 |
| 2 | 200 | 100 | 300 | mm/dev | 0,15–0,23 | 0,17–0,28 | 0,21–0,34 | 0,25–0,39 | 0,30–0,46 | 0,34–0,54 | 0,42–0,67 | 0,52–0,82 | 0,61–0,96 | |
| 4 | 100 | 170 | 250 | mm/dev | 0,16–0,28 | 0,15–0,32 | 0,19–0,36 | 0,23–0,40 | 0,25–0,44 | 0,28–0,48 | 0,32–0,56 | 0,35–0,63 | 0,42–0,72 | |
Oznaczenie katalogowe ISO
Oznaczenie katalogowe ANSI
to find similar products.Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Oznaczenie katalogowe ISO | Gatunek |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
