Deep-Hole Drilling (up to 10xD) • HTS systems
The HTS deep-hole drilling can drill as deep as 10x diameter while still maintaining accuracy and stability. The system’s exclusive High-Speed Steel (HSS) pilot drill design makes this deep-hole capability possible. By precutting and then remaining constantly in the cut, the pilot drill provides excellent guiding and centering of the drill head, even at greater depths. With the modular design of the HTS system, you can construct different drilling combinations from a variety of standard components. Cartridges can be modified to produce specific diameters within the limits of each head and can be replaced quickly with a single mounting screw. The internal coolant supply of the HTS system cools the cutting edges and assists chip evacuation. Ensure that your tools are stable and make the proper connection with the HTS deep-hole drilling system.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (284)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(284)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(284)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(284)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(284)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(284)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(284)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(284)
- M Stainless Steel (283)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(283)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(283)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(283)
- K Cast Iron (297)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(297)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(297)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(297)
- N Non-Ferrous Materials (242)
- N1Wrought Aluminum (242)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(242)
- N3High-Silicon Aluminum Alloys Si >12.2%(238)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (242)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (242)
- N6Carbon, Graphite Composites, CFRP (242)
- N7MMC's (222)
- S High-Temp Alloys (273)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(273)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(273)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(273)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(273)
- H Hardened Materials (113)
- H1Hardened Materials 44-48 HRC(113)
- H2Hardened Materials 48-55 HRC(113)
- H3Hardened Materials 56-60 HRC(113)
- H4Hardened Materials >60 HRC(113)
Select First Choice
- BR (21)
- CN (69)
- DE (69)
- GB (53)
- IN (29)
- SG (52)
- US (69)
Applications
Applications
Convex Drilling (1)
Drilling (61)
Cutting Diameter
Cutting Diameter
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(7)
- 0.3937 in(7)
- 0.5906 in(3)
- 0.7874 in(3)
- 0.9843 in(3)
- 1.1811 in(3)
- 1.5748 in(1)
- 1.6929 in(1)
- 1.77 in(1)
- 1.811 in(1)
- 1.9291 in(1)
- 1.97 in(1)
- 2.0472 in(1)
- 2.17 in(1)
- 2.28 in(1)
- 2.48 in(2)
- 2.68 in(1)
- 2.87 in(1)
- 3.07 in(2)
- 3.31 in(1)
- 3.54 in(1)
- 3.78 in(2)
- 4.02 in(1)
- 4.25 in(1)
- 4.53 in(1)
- 4.8 in(1)
- 5.12 in(1)
- 5.51 in(1)
- 5.91 in(1)
- 6.22 in(1)
- 6.38 in(1)
- 7.09 in(1)
- 7.68 in(1)
- 8.39 in(1)
- 9.06 in(1)
- 10.24 in(1)
to
Cutting Diameter
Cutting Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(7)
- 10.0 mm(7)
- 15.0 mm(3)
- 20.0 mm(3)
- 25.0 mm(3)
- 30.0 mm(3)
- 40.0 mm(1)
- 43.0 mm(1)
- 45.0 mm(1)
- 46.0 mm(1)
- 49.0 mm(1)
- 50.0 mm(1)
- 52.0 mm(1)
- 55.0 mm(1)
- 58.0 mm(1)
- 63.0 mm(2)
- 68.0 mm(1)
- 73.0 mm(1)
- 78.0 mm(2)
- 84.0 mm(1)
- 90.0 mm(1)
- 96.0 mm(2)
- 102.0 mm(1)
- 108.0 mm(1)
- 115.0 mm(1)
- 122.0 mm(1)
- 130.0 mm(1)
- 140.0 mm(1)
- 150.0 mm(1)
- 158.0 mm(1)
- 162.0 mm(1)
- 180.0 mm(1)
- 195.0 mm(1)
- 213.0 mm(1)
- 230.0 mm(1)
- 260.0 mm(1)
to
Cutting Condition
Cutting Condition
- Interrupted (117)
- Stable (194)
- Unstable (139)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 8.0 mm(2)
- 9.6 mm(1)
- 10.0 mm(2)
- 11.3 mm(1)
- 430.0 mm(1)
- 460.0 mm(1)
- 490.0 mm(1)
- 500.0 mm(1)
- 520.0 mm(1)
- 550.0 mm(2)
- 580.0 mm(1)
- 630.0 mm(1)
- 680.0 mm(2)
- 750.0 mm(7)
- 780.0 mm(3)
- 1000.0 mm(5)
- 1060.0 mm(3)
- 1360.0 mm(4)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.315 in(2)
- 0.378 in(1)
- 0.3937 in(2)
- 0.4449 in(1)
- 16.9291 in(1)
- 18.1102 in(1)
- 19.2913 in(1)
- 19.685 in(1)
- 20.4724 in(1)
- 21.6535 in(2)
- 22.8346 in(1)
- 24.8031 in(1)
- 26.7717 in(2)
- 29.5276 in(7)
- 30.7087 in(3)
- 39.3701 in(5)
- 41.7323 in(3)
- 53.5433 in(4)
to
Reach
Reach
- 0.3701 in(1)
- 0.378 in(1)
- 0.3996 in(2)
- 0.4449 in(2)
- 0.4724 in(2)
- 0.6811 in(1)
- 0.9055 in(1)
- 1.1417 in(1)
- 1.4173 in(1)
to
Reach
Reach
- 9.4 mm(1)
- 9.6 mm(1)
- 10.15 mm(2)
- 11.3 mm(2)
- 12.0 mm(2)
- 17.3 mm(1)
- 23.0 mm(1)
- 29.0 mm(1)
- 36.0 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- -8888.0 (33)
to
Connection Style
Connection Style
- HTS (33)
- HTS Pilot Drill Shank (18)
- HTS-C Pilot Drill Shank (4)
- HTS-R Pilot Drill Shank (6)
Number of Flutes
Number of Flutes
- 2 (61)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (76)
- 4.0 (113)
to
Over All Length [L]
Over All Length [L]
- 1.0787 in(1)
- 1.2001 in(1)
- 1.4567 in(1)
- 1.4961 in(1)
- 1.752 in(5)
- 2.0079 in(1)
- 2.1457 in(4)
- 2.2638 in(1)
- 2.7165 in(1)
- 3.3465 in(2)
- 3.7401 in(1)
- 3.937 in(3)
- 4.1338 in(4)
- 4.5276 in(4)
- 4.7244 in(4)
- 5.1181 in(3)
- 5.7087 in(3)
- 6.2992 in(4)
- 7.2835 in(2)
- 7.874 in(1)
- 9.0551 in(2)
to
Over All Length [L]
Over All Length [L]
- 27.4 mm(1)
- 30.5 mm(1)
- 37.0 mm(1)
- 38.0 mm(1)
- 44.5 mm(5)
- 51.0 mm(1)
- 54.5 mm(4)
- 57.5 mm(1)
- 69.0 mm(1)
- 85.0 mm(2)
- 95.0 mm(1)
- 100.0 mm(3)
- 105.0 mm(4)
- 115.0 mm(4)
- 120.0 mm(4)
- 130.0 mm(3)
- 145.0 mm(3)
- 160.0 mm(4)
- 185.0 mm(2)
- 200.0 mm(1)
- 230.0 mm(2)
to
Corner Radius
Corner Radius
- 0.008 in(7)
- 0.012 in(5)
- 0.016 in(132)
- 0.024 in(8)
- 0.031 in(137)
- 0.039 in(52)
- 0.047 in(72)
- 0.063 in(45)
- 0.079 in(22)
to
Corner Radius
Corner Radius
- 0.2 mm(7)
- 0.3 mm(5)
- 0.4 mm(132)
- 0.6 mm(8)
- 0.8 mm(137)
- 1.0 mm(52)
- 1.2 mm(72)
- 1.6 mm(45)
- 2.0 mm(22)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(253)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(253)
to
Application
Coating
Coating
- TiN (8)
- Uncoated (19)
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- A30 (8)
- AS3 (12)
- CS5 (31)
- KC7140 (117)
- KC720 (86)
- KC7215 (90)
- KC7315 (6)
- KC7325 (2)
- KCMS35 (105)
- KCMS40 (81)
- KCPK10 (122)
- KCU25 (143)
- KCU40 (144)
- KD1425 (81)
- KM1 (50)
- KMF (82)
Hand Of Tool
Hand Of Tool
- R (61)
Wiper Insert
Wiper Insert
- N (189)
Drill Type
Drill Type
- 81-06 (28)
- 86-01 (33)
Front-End
Insert Shape
Insert Shape
- B-PARALLELOGRAM 82 (10)
- S-SQUARE 90 (233)
- W-TRIGON 80 (38)
- X-TRIGON 84 (44)
Gage Length
Gage Length
- 60.8000 in(1)
- 75.5000 in(2)
- 85.0000 in(2)
- 87.0000 in(3)
- 90.0000 in(2)
- 90.2000 in(1)
- 92.0000 in(2)
- 93.9000 in(1)
- 94.0000 in(4)
- 96.0000 in(2)
- 99.0000 in(1)
- 100.0000 in(2)
- 106.0000 in(1)
- 110.0000 in(2)
- 112.0000 in(2)
- 113.9000 in(1)
- 125.0000 in(2)
- 135.0000 in(1)
- 139.7000 in(2)
- 160.0000 in(3)
- 163.9000 in(1)
- 168.7500 in(1)
- 175.0000 in(1)
- 181.4500 in(1)
- 200.0000 in(2)
- 204.5000 in(1)
- 210.0000 in(4)
- 212.0000 in(2)
- 220.0000 in(1)
- 234.2500 in(1)
- 268.0000 in(1)
- 283.0500 in(2)
- 285.0500 in(1)
- 308.4500 in(1)
- 310.0000 in(2)
- 312.0000 in(2)
- 314.0000 in(3)
- 316.0000 in(1)
- 331.5000 in(1)
- 333.5000 in(1)
- 360.0000 in(1)
- 395.0000 in(1)
- 399.3500 in(1)
- 448.1500 in(2)
- 458.5000 in(1)
- 460.0000 in(2)
- 462.0000 in(2)
- 464.0000 in(1)
- 488.2500 in(1)
- 498.9500 in(1)
- 510.0000 in(1)
- 514.0000 in(1)
- 516.0000 in(1)
- 536.7000 in(1)
- 612.0000 in(2)
- 614.0000 in(1)
- 653.3500 in(1)
- 790.7000 in(1)
Gage Length
Gage Length
- 60.8000 mm(1)
- 75.5000 mm(2)
- 85.0000 mm(2)
- 87.0000 mm(3)
- 90.0000 mm(2)
- 90.2000 mm(1)
- 92.0000 mm(2)
- 93.9000 mm(1)
- 94.0000 mm(4)
- 96.0000 mm(2)
- 99.0000 mm(1)
- 100.0000 mm(2)
- 106.0000 mm(1)
- 110.0000 mm(2)
- 112.0000 mm(2)
- 113.9000 mm(1)
- 125.0000 mm(2)
- 135.0000 mm(1)
- 139.7000 mm(2)
- 160.0000 mm(3)
- 163.9000 mm(1)
- 168.7500 mm(1)
- 175.0000 mm(1)
- 181.4500 mm(1)
- 200.0000 mm(2)
- 204.5000 mm(1)
- 210.0000 mm(4)
- 212.0000 mm(2)
- 220.0000 mm(1)
- 234.2500 mm(1)
- 268.0000 mm(1)
- 283.0500 mm(2)
- 285.0500 mm(1)
- 308.4500 mm(1)
- 310.0000 mm(2)
- 312.0000 mm(2)
- 314.0000 mm(3)
- 316.0000 mm(1)
- 331.5000 mm(1)
- 333.5000 mm(1)
- 360.0000 mm(1)
- 395.0000 mm(1)
- 399.3500 mm(1)
- 448.1500 mm(2)
- 458.5000 mm(1)
- 460.0000 mm(2)
- 462.0000 mm(2)
- 464.0000 mm(1)
- 488.2500 mm(1)
- 498.9500 mm(1)
- 510.0000 mm(1)
- 514.0000 mm(1)
- 516.0000 mm(1)
- 536.7000 mm(1)
- 612.0000 mm(2)
- 614.0000 mm(1)
- 653.3500 mm(1)
- 790.7000 mm(1)
Point Angle
Point Angle
- 118.0 (54)
- 130.0 (2)
to
Insert Geometry
Shape
Shape
- S-SQUARE 90 (189)
Insert IC Size
Insert IC Size
- 5.56 mm(6)
- 6.35 mm(27)
- 7.742 mm(1)
- 7.937 mm(16)
- 7.94 mm(24)
- 9.525 mm(44)
- 12.7 mm(42)
- 15.732 mm(20)
- 15.875 mm(9)
to
Insert IC Size
Insert IC Size
- 0.2188 in(6)
- 0.25 in(27)
- 0.3048 in(1)
- 0.3125 in(40)
- 0.375 in(44)
- 0.5 in(42)
- 0.625 in(29)
to
Cutting Edge Length
Cutting Edge Length
- 5.417 mm(6)
- 6.207 mm(10)
- 6.35 mm(17)
- 7.742 mm(1)
- 7.797 mm(15)
- 7.937 mm(25)
- 9.382 mm(20)
- 9.525 mm(24)
- 12.557 mm(14)
- 12.7 mm(37)
- 15.732 mm(20)
to
Cutting Edge Length
Cutting Edge Length
- 0.213 in(6)
- 0.244 in(10)
- 0.25 in(17)
- 0.3048 in(1)
- 0.307 in(15)
- 0.3125 in(25)
- 0.3694 in(20)
- 0.375 in(24)
- 0.4944 in(14)
- 0.5 in(37)
- 0.619 in(20)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 20 (33)
- 21 (30)
- 22 (4)
- 31 (12)
- FP (27)
- HP (34)
- MD (37)
- MDT (3)
Cutting Tool Material
Cutting Tool Material
- D P (52)
- H W (253)
Tolerance Class
Tolerance Class
- G (51)
- H (12)
- P (60)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (28)
- HTS SHANK (33)
System Size
System Size
- BT50 (4)
- CV50 (7)
- DV50 (2)
- HSK100A (2)
Back-End Diameter
Back-End Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(7)
- 10.0 mm(7)
- 13.0 mm(9)
- 15.0 mm(3)
- 16.0 mm(5)
- 20.0 mm(3)
- 22.0 mm(6)
- 25.0 mm(3)
- 27.0 mm(6)
- 30.0 mm(3)
- 32.0 mm(13)
- 38.1 mm(2)
- 40.0 mm(10)
- 50.0 mm(37)
- 50.8 mm(19)
- 60.0 mm(3)
- 63.5 mm(3)
- 69.85 mm(13)
- 76.2 mm(3)
- 80.0 mm(2)
- 100.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(7)
- 0.3937 in(7)
- 0.5118 in(9)
- 0.5906 in(3)
- 0.6299 in(5)
- 0.7874 in(3)
- 0.8661 in(6)
- 0.9843 in(3)
- 1.063 in(6)
- 1.1811 in(3)
- 1.2598 in(13)
- 1.5 in(2)
- 1.5748 in(10)
- 1.9685 in(37)
- 2.0 in(19)
- 2.3622 in(3)
- 2.5 in(3)
- 2.75 in(13)
- 3.0 in(3)
- 3.1496 in(2)
- 3.937 in(2)
to
No filters matching ""
