Inserts KSSM™ 12
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (32)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(28)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(28)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(28)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(28)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(28)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(32)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(32)
- M Stainless Steel (28)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(28)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(28)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(28)
- K Cast Iron (24)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(24)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(24)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(24)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(3)
- S High-Temp Alloys (23)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(18)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(18)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(18)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(23)
- H Hardened Materials (3)
- H1Hardened Materials 44-48 HRC(3)
Corner Radius
Corner Radius
- 0.016 in(3)
- 0.031 in(33)
- 0.047 in(10)
to
Corner Radius
Corner Radius
- 0.4 mm(3)
- 0.8 mm(33)
- 1.201 mm(10)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC410M (3)
- KC520M (4)
- KC725M (8)
- KCK15 (5)
- KCK20B (4)
- KCPK30 (5)
- KCPM20 (4)
- KCPM40 (6)
- KCSM40 (4)
- KTPK20 (1)
- KY3500 (2)
Insert Geometry
Chip Breaker CBMD
Chip Breaker CBMD
- GB2 (32)
- GN (2)
- LD (5)
- LD2 (4)
- LE (3)
Cutting Tool Material
Cutting Tool Material
- C N (2)
- H T (1)
- H W (43)
Tolerance Class
Tolerance Class
- C (14)
- E (19)
- P (13)
No filters matching ""
