Mill 1-7™ Milling Cutters Inch
The Mill 1-7 high-performance shoulder mill cutters are a terrific choice for small component machining. Engineered specifically for multiple applications including facing, ramping, slotting, and plunging, the Mill 1-7 provides solutions for roughing and finishing operations. These small-diameter end mills are great for use in industries like energy, aerospace, and general engineering due to their small diameters. The Mill 1-7 shoulder mills are available in inch measurements, with cylindrical shanks, and an internal coolant supply. Inserts are available with two cutting edges and optimized with a straight 90° wall.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (3)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
- K Cast Iron (3)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
- S High-Temp Alloys (3)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (3)
- H1Hardened Materials 44-48 HRC(3)
Applications
Applications
Face Milling (3)
Pocket (3)
Pocket Helical (3)
Pocket Milling (3)
Ramping (3)
Shoulder Milling (3)
Slot Milling (3)
Slot Square End (3)
Cutting Diameter
Cutting Diameter
- 0.496 in(1)
- 0.62 in(1)
- 0.745 in(1)
to
Cutting Diameter
Cutting Diameter
- 12.601 mm(1)
- 15.75 mm(1)
- 18.925 mm(1)
to
Cutting Length
Cutting Length
- 6.926 mm(1)
- 6.95 mm(1)
- 6.976 mm(1)
to
Cutting Length
Cutting Length
- 0.273 in(1)
- 0.274 in(1)
- 0.275 in(1)
to
Reach
Reach
- 0.75 in(1)
- 1.0 in(2)
to
Reach
Reach
- 19.05 mm(1)
- 25.401 mm(2)
to
Number of Flutes
Number of Flutes
- 2 (1)
- 3 (1)
- 5 (1)
Over All Length [L]
Over All Length [L]
- 4.0 in(1)
- 5.0 in(1)
- 6.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 101.601 mm(1)
- 127.0 mm(1)
- 152.4 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC522M (3)
- KC725M (3)
- KCPK30 (3)
- KCPM40 (3)
- KCSM30 (3)
Maximum Ramp Angle
Maximum Ramp Angle
- 2.17 (1)
- 2.97 (1)
- 4.59 (1)
to
Front-End
Neck Diameter
Neck Diameter
- 0.455 in(1)
- 0.586 in(1)
- 0.704 in(1)
to
Neck Diameter
Neck Diameter
- 11.55 mm(1)
- 14.875 mm(1)
- 17.85 mm(1)
to
Back-End
Back-End Diameter
Back-End Diameter
- 12.701 mm(1)
- 15.875 mm(1)
- 19.05 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.5 in(1)
- 0.625 in(1)
- 0.75 in(1)
to
No filters matching ""
