A4™ Modular Blades
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (117)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(117)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(117)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(117)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(117)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(117)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(117)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(117)
- M Stainless Steel (117)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(117)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(117)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(117)
- K Cast Iron (117)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(117)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(117)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(117)
- N Non-Ferrous Materials (117)
- N1Wrought Aluminum (117)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(117)
- N3High-Silicon Aluminum Alloys Si >12.2%(61)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (117)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (117)
- N6Carbon, Graphite Composites, CFRP (117)
- N7MMC's (61)
- S High-Temp Alloys (117)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(117)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(117)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(117)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(117)
- H Hardened Materials (117)
- H1Hardened Materials 44-48 HRC(117)
- H2Hardened Materials 48-55 HRC(117)
- H3Hardened Materials 56-60 HRC(74)
- H4Hardened Materials >60 HRC(74)
Select First Choice
- IN (1)
- US (1)
Applications
Applications
Face Grooving (111)
Grooving (6)
Multiple Direction Cutting (117)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (117)
- Lightly Interrupted Cut (117)
- Smooth Cut (117)
Over All Length [L]
Over All Length [L]
- 2.077 in(31)
- 2.156 in(47)
- 2.269 in(21)
- 2.352 in(14)
to
Over All Length [L]
Over All Length [L]
- 52.75 mm(31)
- 54.75 mm(47)
- 57.625 mm(21)
- 59.75 mm(14)
to
Corner Radius
Corner Radius
- 0.008 in(79)
- 0.016 in(88)
- 0.031 in(56)
- 0.034 in(18)
- 0.039 in(28)
- 0.041 in(22)
- 0.047 in(22)
- 0.048 in(5)
- 0.06 in(32)
- 0.063 in(28)
- 0.079 in(19)
- 0.08 in(18)
- 0.094 in(18)
- 0.098 in(15)
- 0.099 in(15)
- 0.119 in(13)
- 0.12 in(13)
- 0.125 in(13)
- 0.156 in(5)
- 0.157 in(5)
- 0.158 in(5)
- 0.187 in(4)
- 0.188 in(4)
- 0.197 in(4)
- 0.198 in(4)
to
Corner Radius
Corner Radius
- 0.2 mm(79)
- 0.4 mm(88)
- 0.8 mm(56)
- 0.851 mm(18)
- 1.0 mm(28)
- 1.05 mm(22)
- 1.201 mm(22)
- 1.225 mm(5)
- 1.5 mm(32)
- 1.526 mm(28)
- 1.6 mm(28)
- 2.0 mm(19)
- 2.025 mm(18)
- 2.375 mm(18)
- 2.5 mm(15)
- 2.526 mm(15)
- 3.0 mm(13)
- 3.026 mm(13)
- 3.176 mm(13)
- 3.975 mm(5)
- 4.0 mm(5)
- 4.025 mm(5)
- 4.75 mm(4)
- 4.775 mm(4)
- 5.0 mm(4)
- 5.025 mm(4)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K1025 (36)
- K313 (106)
- KB1630 (74)
- KB5625 (74)
- KBH20 (74)
- KC5010 (106)
- KC5025 (106)
- KC9110 (106)
- KC9125 (106)
- KCK20 (83)
- KCP10 (105)
- KCP25 (106)
- KCU10 (117)
- KCU10B (117)
- KCU25 (117)
- KD1405 (61)
- KMS (43)
- KT315 (97)
- KU10 (105)
- KU30T (74)
- KY3500 (83)
- KYS30 (33)
- SP88F8 (13)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(2)
- 20.0 mm(4)
- 25.0 mm(5)
- 36.0 mm(5)
- 42.0 mm(5)
- 48.0 mm(3)
- 50.0 mm(3)
- 52.0 mm(3)
- 58.0 mm(4)
- 60.0 mm(4)
- 64.0 mm(4)
- 68.0 mm(4)
- 70.0 mm(4)
- 80.0 mm(7)
- 90.0 mm(6)
- 92.0 mm(3)
- 100.0 mm(4)
- 120.0 mm(8)
- 130.0 mm(4)
- 132.0 mm(4)
- 184.0 mm(3)
- 200.0 mm(8)
- 250.0 mm(6)
- 290.0 mm(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.63 in(2)
- 0.787 in(4)
- 0.984 in(5)
- 1.417 in(5)
- 1.655 in(5)
- 1.891 in(3)
- 1.969 in(3)
- 2.047 in(3)
- 2.283 in(4)
- 2.362 in(4)
- 2.52 in(4)
- 2.677 in(4)
- 2.757 in(4)
- 3.15 in(7)
- 3.543 in(6)
- 3.622 in(3)
- 3.938 in(4)
- 4.724 in(8)
- 5.118 in(4)
- 5.197 in(4)
- 7.244 in(3)
- 7.875 in(8)
- 9.843 in(6)
- 11.417 in(8)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(2)
- 0.984 in(4)
- 1.379 in(1)
- 1.417 in(4)
- 1.811 in(1)
- 1.891 in(4)
- 2.126 in(2)
- 2.283 in(3)
- 2.52 in(3)
- 2.835 in(3)
- 2.914 in(3)
- 3.307 in(4)
- 3.701 in(4)
- 3.938 in(8)
- 4.409 in(4)
- 4.882 in(3)
- 5.354 in(4)
- 5.906 in(3)
- 6.299 in(4)
- 7.875 in(2)
- 8.346 in(4)
- 10.0 in(4)
- 11.811 in(12)
- 39.331 in(11)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(2)
- 25.0 mm(4)
- 35.0 mm(1)
- 36.0 mm(4)
- 46.0 mm(1)
- 48.0 mm(4)
- 54.0 mm(2)
- 58.0 mm(3)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(8)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 200.0 mm(2)
- 212.0 mm(4)
- 254.0 mm(4)
- 300.0 mm(12)
- 999.0 mm(11)
to
Front-End
Cutting Width
Cutting Width
- 0.079 in(28)
- 0.084 in(28)
- 0.094 in(1)
- 0.095 in(1)
- 0.097 in(1)
- 0.098 in(1)
- 0.104 in(1)
- 0.119 in(32)
- 0.12 in(28)
- 0.122 in(28)
- 0.123 in(32)
- 0.125 in(28)
- 0.13 in(28)
- 0.157 in(19)
- 0.161 in(18)
- 0.162 in(19)
- 0.187 in(18)
- 0.193 in(18)
- 0.197 in(15)
- 0.199 in(15)
- 0.201 in(15)
- 0.202 in(15)
- 0.237 in(13)
- 0.239 in(13)
- 0.241 in(13)
- 0.25 in(13)
- 0.256 in(13)
- 0.312 in(5)
- 0.313 in(5)
- 0.315 in(5)
- 0.317 in(5)
- 0.319 in(5)
- 0.32 in(5)
- 0.375 in(4)
- 0.382 in(4)
- 0.394 in(4)
- 0.396 in(4)
- 0.399 in(4)
to
Cutting Width
Cutting Width
- 2.0 mm(28)
- 2.125 mm(28)
- 2.375 mm(1)
- 2.401 mm(1)
- 2.475 mm(1)
- 2.5 mm(1)
- 2.625 mm(1)
- 3.0 mm(32)
- 3.051 mm(28)
- 3.1 mm(28)
- 3.125 mm(32)
- 3.176 mm(28)
- 3.301 mm(28)
- 4.0 mm(19)
- 4.101 mm(18)
- 4.125 mm(19)
- 4.75 mm(18)
- 4.9 mm(18)
- 5.0 mm(15)
- 5.051 mm(15)
- 5.101 mm(15)
- 5.125 mm(15)
- 6.0 mm(13)
- 6.051 mm(13)
- 6.125 mm(13)
- 6.351 mm(13)
- 6.5 mm(13)
- 7.926 mm(5)
- 7.95 mm(5)
- 8.0 mm(5)
- 8.05 mm(5)
- 8.1 mm(5)
- 8.125 mm(5)
- 9.525 mm(4)
- 9.701 mm(4)
- 10.0 mm(4)
- 10.05 mm(4)
- 10.125 mm(4)
to
Cartridge Size
Cartridge Size
- 50 (95)
- 65 (22)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.473 in(26)
- 0.551 in(54)
- 0.748 in(15)
- 0.946 in(21)
- 1.024 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 12.0 mm(26)
- 14.0 mm(54)
- 19.0 mm(15)
- 24.0 mm(21)
- 26.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (74)
- B L (74)
- C N (83)
- D P (61)
- H T (97)
- H W (117)
No filters matching ""