Downloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 1925622 |
| ISO Catalog ID | PDHX120420SNGN |
| ANSI Catalog ID | PDHX120420SNGN |
| Grade | KC522M |
| [D] Insert IC Size | 16.537 mm |
| [D] Insert IC Size | .651 in |
| [S] Insert Thickness | 4.76 mm |
| [S] Insert Thickness | .1875 in |
| [L10] Insert Cutting Edge Length | 12 mm |
| [L10] Insert Cutting Edge Length | .4724 in |
| [BS] Corner Facet Length | 2 mm |
| [BS] Corner Facet Length | .0787 in |
| [Rε] Corner Radius | 2 mm |
| [Rε] Corner Radius | .0787 in |
| Average Chip Thickness [HM] | 0.21 mm |
| Average Chip Thickness [HM] | .0083 in |
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Material Group | Light | General | Heavy | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1 - P2 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P3 - P4 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P5 - P6 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| M1 - M2 | ||||||
| M3 | ||||||
| K1 - K2 | .S..GN | KC510M | .S..GN | KC510M | ||
| K3 | .S..GN | KC510M | .S..GN | KC510M | ||
| N1 - N2 | ||||||
| N3 | ||||||
| S1 - S2 | ||||||
| S3 | ||||||
| S4 | ||||||
| H1 | ||||||
| Material Group | Light | General | Heavy | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1 - P2 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P3 - P4 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P5 - P6 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| M1 - M2 | ||||||
| M3 | ||||||
| K1 - K2 | .S..GN | KC510M | .S..GN | KC510M | ||
| K3 | .S..GN | KC510M | .S..GN | KC510M | ||
| N1 - N2 | ||||||
| N3 | ||||||
| S1 - S2 | ||||||
| S3 | ||||||
| S4 | ||||||
| H1 | ||||||
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..GN | 0,29 | 0,73 | 1,17 | 0,22 | 0,54 | 0,87 | 0,19 | 0,47 | 0,76 | 0,18 | 0,44 | 0,71 | 0,17 | 0,43 | 0,69 | .S..GN |
| Light | General | Heavy |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..GN | 0,19 | 0,47 | 0,75 | 0,14 | 0,35 | 0,56 | 0,12 | 0,30 | 0,49 | 0,11 | 0,28 | 0,45 | 0,11 | 0,28 | 0,44 | .S..GN |
| Light | General | Heavy |
| Material Group | KC510M | KC522M | KC715M | KC725M | |||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 410 | 360 | 330 | 315 | 275 | 255 |
| 2 | – | – | – | 330 | 290 | 240 | 255 | 225 | 205 | 260 | 230 | 195 | |
| 3 | – | – | – | 305 | 255 | 215 | 225 | 205 | 185 | 240 | 205 | 170 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 170 | 160 | 145 | 215 | 180 | 145 | |
| 5 | – | – | – | 225 | 200 | 180 | 235 | 205 | 190 | 180 | 160 | 145 | |
| 6 | – | – | – | 200 | 150 | 120 | 145 | 125 | – | 160 | 120 | 95 | |
| M | 1 | – | – | – | 245 | 215 | 200 | 270 | 235 | 215 | 205 | 180 | 165 |
| 2 | – | – | – | 225 | 190 | 160 | – | – | – | 185 | 160 | 130 | |
| 3 | – | – | – | 170 | 145 | 115 | – | – | – | 140 | 120 | 95 | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | – | – | – |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | – | – | – | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?