Плунжерное фрезерование

Выбрать фильтры
Фильтры
    Просмотреть фильтры в
    Метрическая система
    Дюймовая система
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (48)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(48)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(48)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(48)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(48)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(48)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(48)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(48)
    • M Stainless Steel (48)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(48)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(48)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(48)
    • K Cast Iron (40)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(40)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(40)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(40)
    • N Non-Ferrous Materials (42)
      • N1
        Wrought Aluminum (42)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(42)
    • S High-Temp Alloys (48)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(48)
    • H Hardened Materials (36)
      • H1
        Hardened Materials 44-48 HRC(36)
    Applications
    Applications
    • Pocket MillingPocket Milling (35)
    • Pocket Plunge MillingPocket Plunge Milling (35)
    Cutting Diameter
    Cutting Diameter
    • 1.074 in(1)
    • 1.153 in(1)
    • 1.25 in(2)
    • 1.26 in(2)
    • 1.5 in(2)
    • 1.575 in(2)
    • 1.579 in(1)
    • 1.697 in(1)
    • 1.969 in(2)
    • 2.0 in(4)
    • 2.48 in(2)
    • 2.5 in(2)
    • 3.0 in(3)
    • 3.15 in(3)
    • 3.938 in(1)
    • 4.0 in(4)
    • 5.0 in(1)
    • 6.299 in(1)
    Cutting Diameter MinдоCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 27.276 mm(1)
    • 29.25 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 40.1 mm(1)
    • 43.1 mm(1)
    • 50.0 mm(2)
    • 50.801 mm(4)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(3)
    • 80.0 mm(3)
    • 100.0 mm(1)
    • 101.601 mm(4)
    • 127.0 mm(1)
    • 160.0 mm(1)
    Cutting Diameter MinдоCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 50.0 mm(1)
    • 52.0 mm(1)
    • 63.0 mm(1)
    • 66.0 mm(1)
    Maximum Cutting Diameter MinдоMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.969 in(1)
    • 2.047 in(1)
    • 2.48 in(1)
    • 2.598 in(1)
    Maximum Cutting Diameter MinдоMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 3.0 mm(4)
    • 11.0 mm(31)
    Cutting Length MinдоCutting Length Max
    Cutting Length
    Cutting Length
    • 0.119 in(4)
    • 0.433 in(31)
    Cutting Length MinдоCutting Length Max
    Reach
    Reach
    • 1.5 in(3)
    • 1.575 in(2)
    • 1.75 in(7)
    • 1.969 in(13)
    • 2.0 in(3)
    • 2.48 in(2)
    • 2.5 in(5)
    Reach MinдоReach Max
    Reach
    Reach
    • 38.1 mm(3)
    • 40.0 mm(2)
    • 44.45 mm(7)
    • 50.0 mm(13)
    • 50.801 mm(3)
    • 63.0 mm(2)
    • 63.5 mm(5)
    Reach MinдоReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 80.05 (1)
    • 80.083 (1)
    • 80.133 (1)
    • 80.183 (1)
    • 88.5 (31)
    Tool Cutting Edge Angle MinдоTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (24)
    • SHCS or RetScrw Or BoltCircle (1)
    • Screw-On Connection (5)
    • Straight-Cylindrical (5)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 2 (4)
    • 3 (4)
    • 4 (4)
    • 5 (8)
    • 6 (6)
    • 7 (5)
    • 8 (1)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (35)
    • 4.0 (55)
    Cutting Edges Per Insert MinдоCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.75 in(4)
    • 1.969 in(11)
    • 2.0 in(3)
    • 2.48 in(2)
    • 2.5 in(5)
    • 2.656 in(3)
    • 2.874 in(1)
    • 2.934 in(1)
    • 7.875 in(2)
    • 8.0 in(3)
    Over All Length [L] MinдоOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 44.45 mm(4)
    • 50.0 mm(11)
    • 50.801 mm(3)
    • 63.0 mm(2)
    • 63.5 mm(5)
    • 67.45 mm(3)
    • 73.0 mm(1)
    • 74.5 mm(1)
    • 200.0 mm(2)
    • 203.201 mm(3)
    Over All Length [L] MinдоOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(36)
    • 0.031 in(37)
    • 0.047 in(49)
    • 0.063 in(36)
    • 0.078 in(36)
    • 0.094 in(35)
    • 0.095 in(35)
    • 0.125 in(36)
    • 0.126 in(35)
    • 0.187 in(35)
    • 0.249 in(35)
    • 0.25 in(35)
    Corner Radius MinдоCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(36)
    • 0.8 mm(37)
    • 1.201 mm(49)
    • 1.6 mm(36)
    • 1.975 mm(36)
    • 2.375 mm(35)
    • 2.401 mm(35)
    • 3.176 mm(36)
    • 3.2 mm(35)
    • 4.75 mm(35)
    • 6.325 mm(35)
    • 6.351 mm(35)
    Corner Radius MinдоCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (42)
    • KC510M (35)
    • KC520M (35)
    • KC522M (36)
    • KC525M (35)
    • KC715M (35)
    • KC725M (39)
    • KC735M (35)
    • KC792M (35)
    • KC915M (35)
    • KC920M (35)
    • KC925M (35)
    • KC935M (35)
    • KCK15 (35)
    • KCK20B (35)
    • KCPK30 (39)
    • KCPM20 (35)
    • KCPM40 (39)
    • KCSM30 (35)
    • KCSM40 (35)
    • KTPK20 (35)
    • KUC20M (35)
    • KUC30M (35)
    • KY1335 (35)
    • KY3500 (35)
    • X500 (35)
    Hand Of Tool
    Hand Of Tool
    • R (35)
    Wiper Insert
    Wiper Insert
    • N (20)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.183 (1)
    • 0.45 (3)
    • 0.467 (1)
    • 0.5 (5)
    • 0.633 (4)
    • 0.7 (3)
    • 0.917 (2)
    • 1.333 (2)
    • 1.4 (2)
    • 1.5 (4)
    • 1.7 (1)
    • 2.0 (1)
    • 2.2 (1)
    • 2.5 (4)
    • 3.5 (1)
    Maximum Ramp Angle MinдоMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.98 in(2)
    • 1.23 in(2)
    • 1.48 in(1)
    Neck Diameter MinдоNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 24.901 mm(2)
    • 31.25 mm(2)
    • 37.6 mm(1)
    Neck Diameter MinдоNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (20)
    Insert IC Size
    Insert IC Size
    • 12.701 mm(20)
    Insert IC Size MinдоInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(20)
    Insert IC Size MinдоInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 12.701 mm(20)
    Cutting Edge Length MinдоCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.5 in(20)
    Cutting Edge Length MinдоCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GDZ (7)
    • HPZ (6)
    • LE (7)
    Cutting Tool Material
    Cutting Tool Material
    • H W (20)
    Tolerance Class
    Tolerance Class
    • C (7)
    • E (7)
    • P (6)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (5)
    • SCREW-ON (5)
    • SHELL MILL (25)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(4)
    • 22.0 mm(7)
    • 25.0 mm(1)
    • 25.401 mm(4)
    • 27.0 mm(4)
    • 29.0 mm(5)
    • 31.75 mm(3)
    • 32.0 mm(2)
    • 38.1 mm(4)
    • 40.0 mm(1)
    Back-End Diameter MinдоBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(4)
    • 0.866 in(7)
    • 0.984 in(1)
    • 1.0 in(4)
    • 1.063 in(4)
    • 1.143 in(5)
    • 1.25 in(3)
    • 1.26 in(2)
    • 1.5 in(4)
    • 1.575 in(1)
    Back-End Diameter MinдоBack-End Diameter Max
    No filters matching ""
    Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
    Select the destination where you want to move до.
    Новинка Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Номер по каталогу ISO

    Номер по каталогу ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
    Session expired due to inactivity, please login again
    Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
    товар(-ы) успешно добавлен(-ы) в корзину

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Номер по каталогу ISO Сплав  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)