Cutters 5720 • Inch

The 5720 seriesof shoulder mills the maximum stability needed for machining aluminum at high speeds. They are an excellent choice for working on components with thin walls due to the low cutting pressure. The 5720 cutters allow each body to hold inserts with different radii without losing any gauge height of the cutter length. The pockets of the cutters are reinforced to allow for heavy feeds, safe ramping, and provide more line contact when utilizing larger radius inserts for more stability. Additionally, the profile and pocketing cutters feature through-tool coolant allowing better chip evacuation. The 5720 series of cutters are available in shell mill and end mill configurations with cylindrical or screw on shanks.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • K Cast Iron (14)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(14)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(14)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(14)
    • N Non-Ferrous Materials (14)
      • N1
        Wrought Aluminum (14)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(14)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(14)
    Applications
    Applications
    • Face MillingFace Milling (12)
    • Pocket MillingPocket Milling (12)
    • Profile MillingProfile Milling (12)
    • RampingRamping (12)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (12)
    • Shoulder MillingShoulder Milling (12)
    • Shoulder RoughingShoulder Roughing (12)
    • Shoulder Square EndShoulder Square End (12)
    • Slot MillingSlot Milling (12)
    • Slot SideSlot Side (12)
    • Slot Square EndSlot Square End (12)
    • Slot TSlot T (12)
    Cutting Diameter
    Cutting Diameter
    • 1.0 in(2)
    • 1.25 in(3)
    • 1.5 in(1)
    • 2.0 in(3)
    • 2.5 in(2)
    • 3.0 in(3)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.401 mm(2)
    • 31.75 mm(3)
    • 38.1 mm(1)
    • 50.801 mm(3)
    • 63.5 mm(2)
    • 76.2 mm(3)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 25.401 mm(1)
    • 38.1 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.0 in(1)
    • 1.5 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Reach
    Reach
    • 1.575 in(3)
    • 1.967 in(1)
    • 1.969 in(6)
    • 2.0 in(2)
    • 2.75 in(1)
    • 3.0 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 40.0 mm(3)
    • 49.95 mm(1)
    • 50.0 mm(6)
    • 50.801 mm(2)
    • 69.851 mm(1)
    • 76.2 mm(1)
    Reach MintoReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (9)
    • Screw-On Connection (3)
    • Straight-Cylindrical (2)
    Number of Flutes
    Number of Flutes
    • 2 (3)
    • 3 (6)
    • 4 (3)
    • 5 (2)
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(3)
    • 1.969 in(4)
    • 2.0 in(2)
    • 2.835 in(1)
    • 2.872 in(1)
    • 2.874 in(1)
    • 5.03 in(1)
    • 5.28 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(3)
    • 50.0 mm(4)
    • 50.801 mm(2)
    • 72.0 mm(1)
    • 72.95 mm(1)
    • 73.0 mm(1)
    • 127.75 mm(1)
    • 134.1 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.012 in(14)
    • 0.016 in(14)
    • 0.031 in(14)
    • 0.049 in(14)
    • 0.066 in(14)
    • 0.083 in(14)
    • 0.103 in(14)
    • 0.122 in(14)
    • 0.13 in(14)
    • 0.161 in(14)
    • 0.206 in(14)
    • 0.244 in(14)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.301 mm(14)
    • 0.4 mm(14)
    • 0.8 mm(14)
    • 1.25 mm(14)
    • 1.675 mm(14)
    • 2.1 mm(14)
    • 2.6 mm(14)
    • 3.1 mm(14)
    • 3.301 mm(14)
    • 4.101 mm(14)
    • 5.2 mm(14)
    • 6.2 mm(14)
    Corner Radius MintoCorner Radius Max
    Application
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 4.6 (3)
    • 5.8 (2)
    • 7.8 (3)
    • 8.1 (1)
    • 11.5 (3)
    • 14.7 (2)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    Front-End
    Neck Diameter
    Neck Diameter
    • 0.961 in(1)
    • 1.18 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 24.401 mm(1)
    • 29.975 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Back-End
    Connection Type
    Connection Type
    • CYLINDRICAL (2)
    • SCREW-ON (3)
    • SHELL MILL (9)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(1)
    • 19.05 mm(2)
    • 19.1 mm(1)
    • 21.0 mm(1)
    • 25.401 mm(6)
    • 29.0 mm(2)
    • 31.75 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.75 in(2)
    • 0.752 in(1)
    • 0.828 in(1)
    • 1.0 in(6)
    • 1.143 in(2)
    • 1.25 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?