Top Notch™ Threading and Grooving
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (7)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(7)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(7)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(7)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(7)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(7)
- M Stainless Steel (7)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(7)
- K Cast Iron (7)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(7)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(7)
- N Non-Ferrous Materials (8)
- N1Wrought Aluminum (8)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (8)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
- N6Carbon, Graphite Composites, CFRP (7)
- N7MMC's (6)
- S High-Temp Alloys (8)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(8)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(8)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(8)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(8)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
- H2Hardened Materials 48-55 HRC(4)
- H3Hardened Materials 56-60 HRC(4)
- H4Hardened Materials >60 HRC(4)
Applications
Applications
Deep Grooving (8)
Grooving (8)
ID Grooving (8)
ID Thread Turning (8)
OD Thread Turning (8)
Plunge Turning (8)
TRN Boring (8)
Type of Thread
Type of Thread
- 60 (4)
- ACME (6)
- API (4)
- API RD (4)
- BSW (2)
- BUTTRESS (4)
- M (2)
- NPT (2)
- STUB ACME (2)
- UN (4)
- UNJ (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (6)
- Lightly Interrupted Cut (6)
- Smooth Cut (7)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (4)
- 2.0 (8)
to
Corner Radius
Corner Radius
- 0.002 in(2)
- 0.003 in(4)
- 0.004 in(2)
- 0.005 in(2)
- 0.006 in(4)
- 0.007 in(4)
- 0.008 in(4)
- 0.01 in(4)
- 0.011 in(2)
- 0.012 in(2)
- 0.014 in(6)
- 0.016 in(4)
- 0.019 in(4)
- 0.02 in(2)
- 0.023 in(6)
- 0.031 in(2)
- 0.033 in(4)
- 0.035 in(4)
- 0.039 in(2)
- 0.047 in(2)
- 0.049 in(2)
- 0.06 in(2)
- 0.062 in(2)
- 0.063 in(4)
- 0.069 in(2)
- 0.078 in(2)
- 0.079 in(4)
- 0.089 in(4)
- 0.095 in(4)
- 0.098 in(2)
- 0.125 in(2)
to
Corner Radius
Corner Radius
- 0.05 mm(2)
- 0.076 mm(4)
- 0.1 mm(2)
- 0.125 mm(2)
- 0.151 mm(4)
- 0.176 mm(4)
- 0.2 mm(4)
- 0.225 mm(2)
- 0.25 mm(4)
- 0.275 mm(2)
- 0.301 mm(2)
- 0.325 mm(6)
- 0.351 mm(4)
- 0.4 mm(4)
- 0.45 mm(4)
- 0.476 mm(1)
- 0.5 mm(2)
- 0.576 mm(6)
- 0.775 mm(2)
- 0.826 mm(4)
- 0.9 mm(4)
- 1.0 mm(2)
- 1.201 mm(2)
- 1.25 mm(2)
- 1.5 mm(2)
- 1.576 mm(2)
- 1.6 mm(4)
- 1.75 mm(2)
- 1.975 mm(2)
- 2.0 mm(4)
- 2.25 mm(4)
- 2.401 mm(4)
- 2.5 mm(2)
- 3.176 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K2885 (2)
- K313 (4)
- K420 (8)
- K4H (2)
- K68 (8)
- KB1345 (4)
- KB1630 (4)
- KB5625 (2)
- KBH20 (1)
- KC250 (2)
- KC5010 (6)
- KC5025 (8)
- KC5410 (4)
- KC710 (4)
- KC720 (4)
- KC722 (4)
- KC730 (6)
- KC732 (2)
- KC810 (8)
- KC850 (8)
- KC910 (2)
- KC9110 (4)
- KC9120 (2)
- KC9320 (4)
- KC935 (4)
- KC950 (4)
- KCK20 (4)
- KCK20B (4)
- KCP10B (4)
- KCP25B (4)
- KCU10 (6)
- KCU10B (4)
- KCU25 (7)
- KD050 (1)
- KD081 (2)
- KD100 (3)
- KD120 (4)
- KD1425 (2)
- KT175 (2)
- KT315 (4)
- KU10T (4)
- KU25T (4)
- KU30T (4)
- KY3000 (4)
- THM (2)
- TN10P (3)
- TN6010 (4)
- TN6025 (7)
- TN7110 (4)
- WU10HT (1)
- WU10PT (2)
- WU25PT (1)
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(7)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(7)
to
Front-End
Cutting Width
Cutting Width
- 0.039 in(2)
- 0.047 in(2)
- 0.06 in(2)
- 0.062 in(2)
- 0.069 in(2)
- 0.073 in(2)
- 0.078 in(2)
- 0.079 in(2)
- 0.088 in(2)
- 0.089 in(1)
- 0.094 in(1)
- 0.095 in(2)
- 0.097 in(2)
- 0.098 in(2)
- 0.105 in(2)
- 0.108 in(2)
- 0.11 in(2)
- 0.119 in(4)
- 0.122 in(2)
- 0.125 in(4)
- 0.126 in(4)
- 0.128 in(2)
- 0.131 in(1)
- 0.138 in(4)
- 0.143 in(2)
- 0.156 in(2)
- 0.157 in(4)
- 0.167 in(4)
- 0.169 in(2)
- 0.177 in(4)
- 0.178 in(2)
- 0.185 in(3)
- 0.188 in(4)
- 0.189 in(4)
- 0.192 in(1)
- 0.193 in(1)
- 0.195 in(2)
- 0.196 in(2)
- 0.197 in(4)
- 0.202 in(2)
- 0.213 in(2)
- 0.217 in(2)
- 0.218 in(2)
- 0.219 in(2)
- 0.237 in(4)
- 0.25 in(6)
- 0.256 in(2)
- 0.276 in(2)
- 0.281 in(4)
- 0.312 in(4)
- 0.315 in(1)
- 0.345 in(2)
- 0.354 in(2)
- 0.375 in(4)
- 0.381 in(2)
- 0.384 in(2)
to
Cutting Width
Cutting Width
- 1.0 mm(2)
- 1.201 mm(2)
- 1.5 mm(2)
- 1.576 mm(2)
- 1.75 mm(2)
- 1.826 mm(2)
- 1.975 mm(2)
- 2.0 mm(2)
- 2.2 mm(2)
- 2.225 mm(2)
- 2.25 mm(1)
- 2.375 mm(1)
- 2.401 mm(2)
- 2.475 mm(2)
- 2.5 mm(2)
- 2.676 mm(2)
- 2.75 mm(2)
- 2.801 mm(2)
- 3.0 mm(4)
- 3.1 mm(2)
- 3.176 mm(4)
- 3.2 mm(4)
- 3.25 mm(2)
- 3.325 mm(1)
- 3.5 mm(4)
- 3.6 mm(2)
- 3.95 mm(2)
- 3.975 mm(1)
- 4.0 mm(4)
- 4.25 mm(4)
- 4.3 mm(2)
- 4.5 mm(4)
- 4.525 mm(2)
- 4.7 mm(3)
- 4.775 mm(4)
- 4.801 mm(4)
- 4.875 mm(1)
- 4.9 mm(1)
- 4.95 mm(2)
- 4.976 mm(2)
- 5.0 mm(4)
- 5.125 mm(2)
- 5.4 mm(2)
- 5.5 mm(2)
- 5.525 mm(2)
- 5.575 mm(2)
- 6.0 mm(4)
- 6.351 mm(6)
- 6.5 mm(2)
- 7.0 mm(2)
- 7.125 mm(4)
- 7.926 mm(4)
- 8.0 mm(1)
- 8.75 mm(2)
- 9.0 mm(2)
- 9.525 mm(4)
- 9.675 mm(2)
- 9.75 mm(2)
to
Insert Size
Insert Size
- 3 (2)
- 4 (2)
- 5 (2)
- 6 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (4)
- B L (2)
- C N (4)
- D P (3)
- H T (4)
- H W (8)
No filters matching ""