欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

项目 已成功添加到购物车
查看购物车
Exit Search 回到解决方案

编辑解决方案

添加解决方案

解决方案名称:{{SolutionName}}

    产品类似于:

    返回到 | 修改类似于

    DFSP Flanged Shank • Right Hand • 4 x D

    Drill Fix™ DFSP™ Bodies

    物料号100030866

    DFSP Flanged Shank • Right Hand • 4 x D
    DFSP Flanged Shank • Right Hand • 4 x D
    DFSP Flanged Shank • Right Hand • 4 x D
    Open expanded view
    DFSP Flanged Shank • Right Hand • 4 x D
    DFSP Flanged Shank • Right Hand • 4 x D
    通用表示形式
    请联系我们的销售人员来了解您的定价。

    Features and benefits

    • DFSP combines the economical squared outboard insert with the superior centering capabilities of the trigon inboard insert.
    • Drill shipped with insert screws, side pipe plug, and Torx wrench.
    • Order inserts for DFSP separately. See pages [REFERENCE] for inserts.
    • 钻孔钻孔
    • 钻孔： 斜切进刀钻孔： 斜切进刀
    • 钻孔： 斜退刀钻孔： 斜退刀
    • 钻孔： X－偏移钻孔： X－偏移
    • 钻孔： 凸面钻孔： 凸面
    • 刀柄 — 圆柱 哨形凹槽 带有驱动和凸缘刀柄 — 圆柱 哨形凹槽 带有驱动和凸缘
    • 贯通式冷却： 径向： 可转位钻孔贯通式冷却： 径向： 可转位钻孔
    • 钻孔： 盲孔钻孔： 盲孔
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    警告 • Drill Fix DFR

    警告 在通孔加工中、刀具在穿过工件时会产生块状或圆盘状物体。在钻头处于静止状态、工件处于旋转状态时、 块状物或圆盘状物会因离心力而从夹具上飞出。应提供有效的防护措施。
    product data image 42415
    DLSCFCS管塞
    0.7502.001/8-27 NPTR 1/8-27 NPT1025612
    1.0003.001/8-27 NPTR 1/4-18 NPT1025612
    1.2503.251/8-27 NPTR 1/4-18 NPT1025612
    1.5003.751/8-27 NPTR 1/4-18 NPT1025612
    2.0004.001/8-27 NPTR 1/4-18 NPT1025612
    英制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围－SFM
    最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    P1SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    2SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    3SOMDKCPK108539351050SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOFPKCU25590640722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40361394459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    4SOFPKCPK10722820984SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOHPKCU25492590722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKCU40295361459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    5SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    6SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    IMDKC7140
    UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IMDKC7140
    英制
    切削速度 vc
    范围－SFM根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    P1SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    1SIMDKC7140101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    1UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1UIMDKC7140656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IIMDKC7140426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2SOMDKCPK10101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    2SIMDKC7140101710661181SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    2UOFPKCU25656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2UIMDKC7140656705754SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IOHPKCU40426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IIMDKC7140426443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3SOMDKCPK108539351050SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    3SIMDKC71408539351050SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    3UOFPKCU25590640722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3UIMDKC7140590640722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IOHPKCU40361394459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IIMDKC7140361394459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4SOFPKCPK10722820984SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    4SIMDKC7140722820984SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    4UOHPKCU25492590722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4UIMDKC7140492590722SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4IOHPKCU40295361459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4IIMDKC7140295361459SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    5SIMDKC7140590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    5UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5UIMDKC7140394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5IIMDKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6SOHPKCU25590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    6SIMDKC7140590656722SFM0.0024–0.00430.0031–0.00550.0039–0.00710.0055–0.00980.0063–0.01180.0071–0.0118
    6UOHPKCU40394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6UIMDKC7140394443492SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6IOHPKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    6IIMDKC7140230279328SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    英制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围－SFM
    最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    M1SOFPKCU25492623754SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IMDKC7140
    UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    IMDKC7140
    IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    IMDKC7140
    2SOFPKCU25492590689SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IMDKC7140
    UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    IMDKC7140
    IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    IMDKC7140
    3SOHPKCU25328426525SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    UOHPKCU40262361459SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    IHPKC7140
    IOMDKC7140164230295SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    IMDKC7140
    英制
    切削速度 vc
    范围－SFM根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    M1SOFPKCU25492623754SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1SIMDKC7140492623754SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    1UIMDKC7140328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    1IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    1IIMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    2SOFPKCU25492590689SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2SIMDKC7140492590689SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2UOMDKCU40328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    2UIMDKC7140328426525SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    2IOMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    2IIMDKC7140197262328SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    3SOHPKCU25328426525SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3SIHPKC7140328426525SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3UOHPKCU40262361459SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    3UIHPKC7140262361459SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0079
    3IOMDKC7140164230295SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    3IIMDKC7140164230295SFM0.0012–0.00200.0016–0.00280.0020–0.00350.0028–0.00510.0031–0.00630.0039–0.0071
    英制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围－SFM
    最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    K1SOFPKCPK10656787984SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKCU40
    UOFPKCU25394508656SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOFPKC7140262328410SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    2SOFPKCPK10590722853SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKCU40
    UOHPKCU25361459558SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOHPKC7140262328394SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    3SOHPKCPK10590722853SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKCU40
    UOHPKCU25361459558SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOHPKC7140262328394SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    英制
    切削速度 vc
    范围－SFM根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    K1SOFPKCPK10656787984sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1SIHPKCU40656787984sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1UOFPKCU25394508656sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1UIHPKC7140394508656sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1IOFPKC7140262328410sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IIHPKC7140262328410sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2SOFPKCPK10590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2SIHPKCU40590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2UOHPKCU25361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2UIHPKC7140361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2IOHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IIHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3SOHPKCPK10590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3SIHPKCU40590722853sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3UOHPKCU25361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3UIHPKC7140361459558sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3IOHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IIHPKC7140262328394sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    英制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围－SFM
    最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    N1SOHPKCPK10114816402132SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4098413121640SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU406569841312SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    2SOHPKCPK1098413121640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU405748201066SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    3SOHPKCPK1098413121640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU404928201148SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    4SOHPKCU2598413121640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKC7140
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKC7140
    IOHPKCU406569841312SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKC7140
    5SOHPKCU40131214761640SFM0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    IHPKMF
    UOHPKCU4082011481476SFM0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    IHPKMF
    IOHPKCU406569841312SFM0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    IHPKMF
    英制
    切削速度 vc
    范围－SFM根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    N1SOHPKCPK10114816402132sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1SIHPKMF114816402132sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    1UOHPKCU4098413121640sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1UIHPKMF98413121640sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    1IOHPKCU406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    1IIHPKMF6569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2SOHPKCPK1098413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2SIHPKMF98413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    2UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2UIHPKMF82011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    2IOHPKCU405748201066sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    2IIHPKMF5748201066sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3SOHPKCPK1098413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3SIHPKMF98413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    3UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3UIHPKMF82011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    3IOHPKCU404928201148sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    3IIHPKMF4928201148sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4SOHPKCU2598413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    4SIHPKC714098413121640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    4UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    4UIHPKC714082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    4IOHPKCU406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    4IIHPKC71406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5SOHPKCU40131214761640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    5SIHPKMF131214761640sfm0.0028–0.00470.0039–0.00630.0047–0.00790.0063–0.01100.0071–0.01260.0079–0.0134
    5UOHPKCU4082011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    5UIHPKMF82011481476sfm0.0020–0.00350.0024–0.00470.0031–0.00590.0047–0.00790.0055–0.00980.0063–0.0110
    5IOHPKCU406569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    5IIHPKMF6569841312sfm0.0016–0.00240.0020–0.00310.0024–0.00390.0035–0.00590.0043–0.00710.0051–0.0098
    英制
    材料 分组条件刀窝槽型材质切削速度 vc根据直径推荐进给率（fz）
    范围－SFM
    最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    S1SOHPKCU40197230246SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU40131164197SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU408298131SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    2SOHPKCU40164197230SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU4098131164SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU408298131SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    3SOHPKCU40230262295SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU40164197230SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU4098131164SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    4SOHPKCU40230262295SFM0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    IMDKC7140
    UOHPKCU40164197230SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    IOHPKCU4098131164SFM0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    IMDKC7140
    英制
    切削速度 vc
    范围－SFM根据直径推荐进给率（fz）
    材料 分组条件刀窝槽型材质最小值初始值最大值ØSPGX05 DFTX2 .563–.688SPGX06 DFT03 .703–.844SPGX07 DFT05 .875–1.000SPGX09 DFT05 1.025–1.250SPGX12 DFT06/..07 1.313–1.656SPGX15 DFT07/..09 1.688–2.125
    S1SOHPKCU40197230246sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    1SIMDKC7140197230246sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    1UOHPKCU40131164197sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    1UIMDKC7140131164197sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    1IOHPKCU408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    1IIMDKC71408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2SOHPKCU40164197230sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    2SIMDKC7140164197230sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    2UOHPKCU4098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2UIMDKC714098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2IOHPKCU408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    2IIMDKC71408298131sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3SOHPKCU40230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    3SIMDKC7140230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    3UOHPKCU40164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3UIMDKC7140164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3IOHPKCU4098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    3IIMDKC714098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4SOHPKCU40230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    4SIMDKC7140230262295sfm0.0012–0.00240.0016–0.00310.0020–0.00390.0031–0.00470.0039–0.00590.0047–0.0071
    4UOHPKCU40164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4UIMDKC7140164197230sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4IOHPKCU4098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    4IIMDKC714098131164sfm0.0008–0.00120.0008–0.00160.0012–0.00200.0016–0.00240.0020–0.00310.0024–0.0039
    您即将把 添加至“我的解决方案”页面. 是否要继续？
    Select the destination where you want to move 到.
    最新 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    请输入一个有效名称
    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    应记录以查看仪表盘信息
    Session expired due to inactivity, please login again
    您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
    件物品已成功添加到购物车
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk