产品类似于:

返回到 | 修改类似于

锥体法兰接口接头 • CVF

Name: 锥体法兰接口接头 • CVF
SKU: 109318139
Rating: 0 (0 reviews)

锥体法兰接口刀柄 • CVF

锥体法兰接口接头 • CVF

Open expanded view

通用表示形式

请联系我们的销售人员来了解您的定价。

Features and benefits

Designed for demanding applications like high-temperature alloy airframe structural parts machining.
Higher stability than any straight flange connection, adding unequaled bending moment resistance.
Large volume coolant supply through the center to support chip evacuation and to control heat in the cutting zone.
Specially designed drive keys for maximum torque transmission.
Six bolts for secure mounting.
Taper pilot ensures maximum tool stabilization.
Not interchangeable with CVKV-Taper Face Tooling.

Shank: Flange Mount
平衡 — G 6.3@ 15,000 min -1
贯通式冷却：冷却剂入口AD
48909

High Performance Combination Tools
Feeds
Speeds
评论
常见问题

Insert Selection Guide

Recommended Starting Feeds [IPT]

HARVI™ Ultra 8X • Recommended Starting Feeds [IPT]
刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)
	10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H
HARVI Ultra 8X - SNHJ....E..LEH	0.004	0.007	0.008	0.003	0.005	0.006	0.002	0.004	0.005	0.002	0.004	0.005
HARVI Ultra 8X - SNHJ....S..GDH	0.005	0.008	0.010	0.004	0.006	0.008	0.003	0.005	0.007	0.003	0.005	0.006
KSSM8+ - SNPJ…..S..GD	0.007	0.015	0.023	0.005	0.011	0.017	0.004	0.009	0.015	0.004	0.009	0.014
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

Recommended Starting Speeds [SFM]

HARVI™ Ultra 8X • Recommended Starting Speed [SFM]
刀片材质		KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40
Chip Thickness hex Inch		最小值		最大值	最小值		最大值	最小值		最大值	最小值		最大值	最小值		最大值	最小值		最大值
材料分组		最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值
P	1	855	755	705	–	–	–	1495	1295	1215	–	–	–	970	855	805	1150	1050	985
	2	720	625	525	–	–	–	920	835	755	–	–	–	820	705	590	985	885	720
	3	655	560	460	–	–	–	835	755	675	–	–	–	755	640	525	920	785	640
	4	590	490	395	–	–	–	740	605	525	–	–	–	675	560	445	785	675	540
	5	490	445	395	–	–	–	625	560	490	–	–	–	560	510	445	655	590	525
	6	425	330	260	–	–	–	525	445	360	–	–	–	490	375	295	590	460	330
M	1	560	490	445	–	–	–	675	605	510	–	–	–	640	560	510	855	690	605
	2	510	425	360	–	–	–	605	525	460	–	–	–	575	490	410	770	590	475
	3	375	330	260	–	–	–	475	425	375	–	–	–	425	375	295	575	475	360
K	1	–	–	–	1380	1265	1115	970	870	785	1180	950	805	–	–	–	–	–	–
	2	–	–	–	1100	970	900	770	690	625	920	755	640	–	–	–	–	–	–
	3	–	–	–	920	820	755	640	575	525	690	575	460	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	165	130	80
	2	115	100	80	–	–	–	–	–	–	–	–	–	130	115	100	180	130	80
	3	150	115	80	–	–	–	–	–	–	–	–	–	165	130	100	215	150	100
	4	165	150	100	–	–	–	165	150	115	–	–	–	180	165	115	245	195	130
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

推荐初始切削速度[m/min]

HARVI™ Ultra 8X • Recommended Starting Speed [m/min]
刀片材质		KC725M			KCK15			KCPK30			KCK20B			KCPM40			KCSM40
切削厚度 hex mm		最小值		最大值	最小值		最大值	最小值		最大值	最小值		最大值	最小值		最大值	最小值		最大值
材料分组		最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值	最大值	初始值	最小值
P	1	260	230	215	–	–	–	455	395	370	–	–	–	295	260	245	350	320	300
	2	220	190	160	–	–	–	280	255	230	–	–	–	250	215	180	300	270	220
	3	200	170	140	–	–	–	255	230	205	–	–	–	230	195	160	280	240	195
	4	180	150	120	–	–	–	225	185	160	–	–	–	205	170	135	240	205	165
	5	150	135	120	–	–	–	190	170	150	–	–	–	170	155	135	200	180	160
	6	130	100	80	–	–	–	160	135	110	–	–	–	150	115	90	180	140	100
M	1	170	150	135	–	–	–	205	185	155	–	–	–	195	170	155	260	210	185
	2	155	130	110	–	–	–	185	160	140	–	–	–	175	150	125	235	180	145
	3	115	100	80	–	–	–	145	130	115	–	–	–	130	115	90	175	145	110
K	1	–	–	–	420	385	340	295	265	240	360	290	245	–	–	–	–	–	–
	2	–	–	–	335	295	275	235	210	190	280	230	195	–	–	–	–	–	–
	3	–	–	–	280	250	230	195	175	160	210	175	140	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	50	40	25
	2	35	30	25	–	–	–	–	–	–	–	–	–	40	35	30	55	40	25
	3	45	35	25	–	–	–	–	–	–	–	–	–	50	40	30	65	45	30
	4	50	45	30	–	–	–	50	45	35	–	–	–	55	50	35	75	60	40
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
最大值中间值最小值 x 计算公式 x

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

HARVI™ Ultra 8X • Recommended Starting Feeds [mm/th]
刀片槽型	不同切宽(ae)百分比情况下，所建议的每齿进给量设定值(fz)
	10%			20%			30%			40–100%
	L	M	H	L	M	H	L	M	H	L	M	H
HARVI Ultra 8X - SNHJ....E..LEH	0.09	0.17	0.23	0.07	0.13	0.18	0.06	0.11	0.15	0.06	0.10	0.14
HARVI Ultra 8X - SNHJ....S..GDH	0.13	0.20	0.31	0.10	0.15	0.23	0.09	0.13	0.20	0.08	0.12	0.18
KSSM8+ - SNPJ…..S..GD	0,17	0,37	0,59	0,13	0,27	0,44	0,11	0,24	0,38	0,10	0,22	0,35
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate.

欢迎

请确认您的首选项

更新首选项

产品建议

Product Family suggestions

请联系销售团队

请联系销售团队

编辑解决方案

添加解决方案

产品类似于:

锥体法兰接口接头 • CVF

锥体法兰接口刀柄 • CVF