牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
DFT 4xD Flanged Shk Inch RH Holemaking - 1522131 - Kennametal
DFT Flanged Shank • Right Hand • 4 x D
Drill Fix™ DFT™ Bodies
物料号1522131
公制样本编号DFT0875R4SSF125英制样本编号DFT0875R4SSF125
牌价
$638.44/每个
折扣
您的价格
/每个
有库存这个产品不再供应较长交货期
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
- P 钢
- M 不锈钢
- K 铸铁
- N 非铁材质
- S 高温合金
- H 淬火材料
钻孔
钻孔： 斜切进刀
钻孔： 斜退刀
钻孔： X－偏移
钻孔： 凸面
刀柄 — 圆柱 哨形凹槽 带有驱动和凸缘
贯通式冷却： 径向： 可转位钻孔
钻孔： 盲孔
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
MetricInch
| 物料号 | 1522131 |
| 公制样本编号 | DFT0875R4SSF125 |
| 英制样本编号 | DFT0875R4SSF125 |
| [D]适配接头/刀柄/镗孔直径 | 31.75 mm |
| [D]适配接头/刀柄/镗孔直径 | 1.25 in |
| [D1] 钻头直径 M | 22.225 mm |
| [D1] 钻头直径 M | .875 in |
| [D1MAX] 最大钻头直径 | 24.13 mm |
| [D1MAX] 最大钻头直径 | .95 in |
| [L1] 刀片量规长度 | 127 mm |
| [L1] 刀片量规长度 | 5 in |
| [L4] 最大钻孔深度 | 88.9 mm |
| [L4] 最大钻孔深度 | 3.5 in |
| [L5] 钻尖长度 | 0.837 mm |
| [L5] 钻尖长度 | .033 in |
| [LS] 刀柄长度 | 82.55 mm |
| [LS] 刀柄长度 | 3.25 in |
| Gage 刀片 | DFT0303. |
工件材料
- 钢
- 不锈钢
- 铸铁
- 非铁材质
- 高温合金
- 淬火材料
Uses and application
Features and benefits
- Drill Fix DFT is one of the most versatile and reliable tool solutions covering a large diameter range and offers portfolio of insert geometries and grades.
- Trigon-shaped inserts are used for both inboard and outboard inserts and offer the highest centering capabilities and three cutting edges each.
- Drill shipped with insert screws, side pipe plug, and Torx wrench.
通过创建解决方案计算速度和进给
创建解决方案后，只需选择进给和速度图标，我们的系统将提供建议。您可以通过添加您的机床和参数来定制信息，或者使用滑块进行调整。
Warning
警告 • Drill Fix DFR
| UYARI Delme işlemleri sırasında, matkap iş parçasını delip geçtiğinde işlenmemiş bir metal parçası veya delik sonunda pul oluşur. Matkap sabitken ve iş parçası dönerken bu parçalar merkezkaç kuvvetiyle takım tutucudan fırlayabilir. Çevredeki kişileri korumak üzere yeterli önlemlerin alınması gereklidir. |
阅读全文View Less
Dimension
 | ||||
| D | LS | CF | CS | pipe plug |
| 0.750 | 2.00 | 1/8-27 NPT | R 1/8-27 NPT | 1025612 |
| 1.000 | 3.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.250 | 3.25 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 1.500 | 3.75 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
| 2.000 | 4.00 | 1/8-27 NPT | R 1/4-18 NPT | 1025612 |
阅读全文View Less
应用数据
| İnç | |||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Kesme hızı | Çap başına önerilen ilerleme oranı (f) | |||||||||
| Aralık | |||||||||||||||
| Min. | Başlangıç değeri | Maks. | Ø | DFT03... .625" – .969" | DFT05... .984" – 1.250" | DFT06... 1.313" – 1.563" | DFT07... 1.625" – 1.875" | DFT09... 1.938" – 2.125" | DFT011... 2.750" – 3.250" | ||||||
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 |
| I | MD | KC7140 | |||||||||||||
| U | O | MD | KCU25 | 656 | 705 | 754 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | MD | KC7140 | |||||||||||||
| I | O | MD | KCU40 | 426 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | MD | KC7140 | |||||||||||||
| 2 | S | O | HP | KCPK10 | 1017 | 1066 | 1181 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 656 | 705 | 754 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 426 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| 3 | S | O | HP | KCPK10 | 853 | 935 | 1050 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU25 | 590 | 640 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| 4 | S | O | HP | KCU25 | 722 | 820 | 984 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 492 | 590 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 295 | 361 | 459 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002 – .004 | .003 – .005 | .004 – .006 | .004 – .007 | .005 – .009 | .005 – .009 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002 – .004 | .003 – .005 | .004 – .006 | .004 – .007 | .005 – .009 | .005 – .009 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .003 – .005 | .004 – .006 | .004 – .007 | .005 – .009 | .005 – .009 | ||
| I | HP | KC7140 | |||||||||||||
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | |
| I | HP | KC7140 | |||||||||||||
| U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | ||
| I | HP | KC7140 | |||||||||||||
| İnç | |||||||||||||||
| Kesme hızı | |||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Min. | Başlangıç değeri | Maks. | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 |
| 1 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | U | O | MD | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | U | I | MD | KC7140 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | I | O | MD | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 1 | I | I | MD | KC7140 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | S | O | HP | KCPK10 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | S | I | HP | KC7140 | 1017 | 1066 | 1181 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | U | O | HP | KCU25 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | U | I | HP | KC7140 | 656 | 705 | 754 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | I | O | HP | KCU40 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 2 | I | I | HP | KC7140 | 426 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | S | O | HP | KCPK10 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | S | I | HP | KC7140 | 853 | 935 | 1050 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | U | O | HP | KCU25 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | U | I | HP | KC7140 | 590 | 640 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | I | O | HP | KCU40 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 3 | I | I | HP | KC7140 | 361 | 394 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | S | O | HP | KCU25 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | S | I | HP | KC7140 | 722 | 820 | 984 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | U | O | HP | KCU40 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | U | I | HP | KC7140 | 492 | 590 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | I | O | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 4 | I | I | HP | KC7140 | 295 | 361 | 459 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 5 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 5 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.009 | .005–.009 | |
| 6 | S | O | HP | KCU25 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | U | O | HP | KCU40 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | I | O | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| 6 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002–.004 | .004–.006 | .004–.007 | .006–.010 | .007–.012 | .007–.012 | |
| İnç | |||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Kesme hızı | Çap başına önerilen ilerleme oranı (f) | |||||||||
| Aralık | |||||||||||||||
| Min. | Başlangıç değeri | Maks. | Çapa Göre Tavsiye Edilen İlerleme Oranı (f) | ||||||||||||
| Grup | Koşul | min. | Başlama Değeri | maks. | Ø | DFT03... .625" – .969" | DFT05... .984" – 1.250" | DFT06... 1.313" – 1.563" | DFT07... 1.625" – 1.875" | DFT09... 1.938" – 2.125" | |||||
| S | O | MD | |||||||||||||
| 1 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| U | O | MD | |||||||||||||
| 1 | U | I | MD | KC7140 | 656 | 705 | 754 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| I | O | MD | |||||||||||||
| 1 | I | I | MD | KC7140 | 426 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| S | O | HP | |||||||||||||
| 2 | S | I | HP | KC7140 | 1017 | 1066 | 1181 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| U | O | HP | |||||||||||||
| 2 | U | I | HP | KC7140 | 656 | 705 | 754 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| I | O | HP | |||||||||||||
| 2 | I | I | HP | KC7140 | 426 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| S | O | HP | |||||||||||||
| 3 | S | I | HP | KC7140 | 853 | 935 | 1050 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| U | O | HP | |||||||||||||
| 3 | U | I | HP | KC7140 | 590 | 640 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| I | O | HP | |||||||||||||
| İnç | |||||||||||||||
| Kesme hızı | |||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Min. | Başlangıç değeri | Maks. | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| M | 1 | S | O | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 |
| 1 | S | I | MD | KC7140 | 492 | 623 | 754 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | U | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 1 | I | I | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | S | O | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | S | I | MD | KC7140 | 492 | 590 | 689 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | U | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | U | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | I | O | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 2 | I | I | MD | KC7140 | 197 | 262 | 328 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | S | O | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | S | I | MD | KC7140 | 328 | 426 | 525 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | U | O | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | U | I | MD | KC7140 | 262 | 361 | 459 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | I | O | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| 3 | I | I | MD | KC7140 | 164 | 230 | 295 | IPR | .002–.004 | .003–.005 | .003–.006 | .004–.007 | .004–.008 | .004–.008 | |
| İnç | |||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Kesme hızı | Çap başına önerilen ilerleme oranı (f) | |||||||||
| Aralık | |||||||||||||||
| Min. | Başlangıç değeri | Maks. | 2 | U | O | HP | KCU25 | 656 | 705 | ||||||
| 754 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 2 | U | I | HP | KC7140 | 656 | 705 | |
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 2 | I | I | HP | KC7140 | 426 | 443 | |||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 3 | S | I | HP | KC7140 | 853 | 935 | |||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 3 | U | I | HP | KC7140 | 590 | 640 | ||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 3 | I | I | HP | KC7140 | 361 | 394 | |||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 4 | S | I | HP | KC7140 | 722 | 820 | |||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 4 | U | I | HP | KC7140 | 492 | 590 | ||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | .007 – .012 | 4 | I | I | HP | KC7140 | 295 | 361 | |||
| .004 – .006 | .004 – .007 | .006 – .010 | |||||||||||||
| .002 – .004 | .003 – .005 | .004 – .006 | .004 – .007 | .005 – .009 | .005 – .009 | 5 | S | I | HP | KC7140 | 590 | 656 | |||
| .003 – .005 | .004 – .006 | .004 – .007 | |||||||||||||
| İnç | |||||||||||||||
| Kesme hızı | |||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Min. | Başlangıç değeri | Maks. | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| K | 1 | S | O | HP | KCPK10 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 |
| 1 | S | I | HP | KCU40 | 656 | 787 | 984 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | U | O | HP | KCU25 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | U | I | HP | KC7140 | 394 | 508 | 656 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | I | O | HP | KCU40 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 1 | I | I | HP | KC7140 | 262 | 328 | 410 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | S | I | HP | KCU40 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | U | I | HP | KC7140 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 2 | I | I | HP | KC7140 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | S | O | HP | KCPK10 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | S | I | HP | KCU40 | 590 | 722 | 853 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | U | O | HP | KCU25 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | U | I | HP | KC7140 | 361 | 459 | 558 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | I | O | HP | KCU40 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| 3 | I | I | HP | KC7140 | 262 | 328 | 394 | IPR | .003–.005 | .004–.007 | .006–.010 | .007–.013 | .008–.015 | .008–.015 | |
| İnç | |||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Kesme hızı | Çap başına önerilen ilerleme oranı (f) | |||||||||
| Aralık | |||||||||||||||
| Min. | Başlangıç değeri | Maks. | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||||||
| .007 – .012 | 6 | S | I | HP | KC7140 | 590 | 656 | 722 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | |
| U | O | HP | |||||||||||||
| 6 | U | I | HP | KC7140 | 394 | 443 | 492 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| I | O | HP | |||||||||||||
| 6 | I | I | HP | KC7140 | 230 | 279 | 328 | IPR | .002 – .004 | .004 – .006 | .004 – .007 | .006 – .010 | .007 – .012 | ||
| İnç | |||||||||||||||
| Kesme hızı | |||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Min. | Başlangıç değeri | Maks. | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| N | 1 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 |
| 1 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | U | O | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | U | I | HP | KCU40 | 984 | 1312 | 1640 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 1 | I | I | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | S | O | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | S | I | ST | KD1425 | 1230 | 1804 | 2542 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | I | O | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 2 | I | I | HP | KMF | 574 | 820 | 1066 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | S | O | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | S | I | ST | KD1425 | 1148 | 1640 | 2132 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | I | O | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 3 | I | I | HP | KMF | 492 | 820 | 1148 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 4 | I | I | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | U | O | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | U | I | HP | KCU40 | 820 | 1148 | 1476 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | I | O | HP | KMF | 656 | 984 | 1312 | IPR | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| 5 | I | I | HP | KMF | 656 | 984 | 1312 | ipr | .002–.003 | .003–.004 | .004–.006 | .005–.006 | .006–.007 | .006–.007 | |
| İnç | |||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Kesme hızı | Çap başına önerilen ilerleme oranı (f) | |||||||||
| Aralık | |||||||||||||||
| Min. | Başlangıç değeri | Maks. | |||||||||||||
| İnç | |||||||||||||||
| Kesme hızı | |||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Malzeme grubu | Koşul | Uç yuvası yatağı | Geometri | Kalite | Min. | Başlangıç değeri | Maks. | Ø | DFT03... .625"–.969" | DFT05... .984"–1.250" | DFT06... 1.313"–1.563" | DFT07... 1.625"–1.875" | DFT09... 1.938"–2.125" | DFT011... 2.750"–3.250" | |
| S | 1 | S | O | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 |
| 1 | S | I | HP | KCU40 | 197 | 230 | 246 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | U | O | HP | KCU40 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | U | I | HP | KC7140 | 131 | 164 | 197 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 1 | I | I | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | S | O | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | S | I | HP | KCU40 | 164 | 197 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | U | O | HP | KCU40 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | U | I | HP | KC7140 | 98 | 131 | 164 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | I | O | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 2 | I | I | MD | KC7140 | 82 | 98 | 131 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.005 | .003–.005 | |
| 3 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | S | I | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.004 | .002–.003 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | U | I | HP | KC7140 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 3 | I | I | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | S | O | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | S | I | HP | KCU40 | 230 | 262 | 295 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | U | O | HP | KCU40 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | U | I | HP | KC7140 | 164 | 197 | 230 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | I | O | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
| 4 | I | I | MD | KC7140 | 98 | 131 | 164 | IPR | .002–.002 | .002–.003 | .002–.004 | .002–.004 | .004–.006 | .004–.006 | |
阅读全文View Less
I have read and accepted the Terms & Conditions of use
通过创建解决方案为您找到合适的兼容部件
产品名称
物料号
公制样本编号
英制样本编号
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
通过创建解决方案为您找到合适的兼容部件
产品名称
物料号
公制样本编号
英制样本编号
材质
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
产品名称
物料号
公制样本编号
英制样本编号
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期
牌价
/每个
折扣
您的价格
/每个
出售时采用的包装 0调整以满足最小包装尺寸。
最小数量： 0调整以达到最低订单数量。
有库存这个产品不再供应较长交货期