HBB
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (104)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(104)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(104)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(104)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(104)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(104)
- M Stainless Steel (104)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(104)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(104)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(104)
- K Cast Iron (104)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
- N Non-Ferrous Materials (97)
- N1Wrought Aluminum (97)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(96)
- N3High-Silicon Aluminum Alloys Si >12.2%(62)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (97)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (96)
- N6Carbon, Graphite Composites, CFRP (96)
- N7MMC's (76)
- S High-Temp Alloys (104)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(104)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(104)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(104)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(104)
- H Hardened Materials (94)
- H1Hardened Materials 44-48 HRC(94)
- H2Hardened Materials 48-55 HRC(94)
- H3Hardened Materials 56-60 HRC(94)
- H4Hardened Materials >60 HRC(76)
- C CFRP Materials (86)
- C1CFRP, CFRP / CFRP (86)
- C2CFRP / Aluminium CFRP / Non-Ferrous (76)
Applications
Applications
ID Grooving (11)
ID Thread Turning (11)
TRN Boring (11)
Type of Thread
Type of Thread
- 55 (6)
- 60 (16)
- ACME (17)
- API (13)
- API BUTTRESS (2)
- API RD (13)
- BSPT (4)
- BSW (14)
- BUTTRESS (10)
- M (14)
- NPT (12)
- NPTF (4)
- RD DIN 405 (6)
- STUB ACME (14)
- TR DIN 103 (6)
- UN (14)
- UNJ (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (96)
- Lightly Interrupted Cut (96)
- Smooth Cut (96)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (2)
- 90.0 (34)
- 93.0 (34)
- 95.0 (32)
to
Connection Style
Connection Style
- Bolt-On Head (104)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (2)
- 1.0 (68)
- 2.0 (73)
- 3.0 (27)
- 4.0 (46)
- 6.0 (14)
- 8.0 (24)
to
Over All Length [L]
Over All Length [L]
- 0.696 in(12)
- 0.734 in(2)
- 0.892 in(6)
- 0.971 in(4)
- 0.994 in(1)
- 1.01 in(2)
- 1.049 in(2)
- 1.246 in(6)
- 1.27 in(3)
- 1.285 in(12)
- 1.348 in(4)
- 1.364 in(14)
- 1.389 in(7)
- 1.405 in(24)
- 1.463 in(1)
- 1.522 in(3)
- 1.561 in(1)
to
Over All Length [L]
Over All Length [L]
- 17.651 mm(12)
- 18.651 mm(2)
- 22.651 mm(6)
- 24.651 mm(4)
- 25.25 mm(1)
- 25.651 mm(2)
- 26.651 mm(2)
- 31.651 mm(6)
- 32.25 mm(3)
- 32.65 mm(12)
- 34.25 mm(4)
- 34.65 mm(14)
- 35.25 mm(7)
- 35.65 mm(24)
- 37.15 mm(1)
- 38.651 mm(3)
- 39.651 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(6)
- 0.001 in(22)
- 0.002 in(40)
- 0.003 in(14)
- 0.004 in(76)
- 0.005 in(8)
- 0.006 in(14)
- 0.007 in(10)
- 0.008 in(80)
- 0.01 in(10)
- 0.011 in(8)
- 0.012 in(10)
- 0.014 in(18)
- 0.016 in(93)
- 0.017 in(2)
- 0.019 in(10)
- 0.02 in(8)
- 0.021 in(1)
- 0.023 in(10)
- 0.027 in(1)
- 0.028 in(4)
- 0.031 in(92)
- 0.033 in(1)
- 0.035 in(10)
- 0.037 in(2)
- 0.039 in(9)
- -0.039 in(2)
- 0.047 in(84)
- 0.049 in(8)
- 0.06 in(8)
- 0.062 in(20)
- 0.063 in(56)
- 0.069 in(8)
- 0.078 in(8)
- 0.079 in(10)
- 0.089 in(10)
- 0.094 in(8)
- 0.095 in(30)
- 0.098 in(2)
- 0.125 in(4)
- 0.126 in(8)
to
Corner Radius
Corner Radius
- 0.0 mm(6)
- 0.025 mm(22)
- 0.05 mm(40)
- 0.076 mm(14)
- 0.1 mm(76)
- 0.125 mm(8)
- 0.151 mm(14)
- 0.176 mm(10)
- 0.2 mm(80)
- 0.225 mm(8)
- 0.25 mm(10)
- 0.275 mm(8)
- 0.301 mm(10)
- 0.325 mm(10)
- 0.351 mm(18)
- 0.4 mm(93)
- 0.426 mm(2)
- 0.45 mm(10)
- 0.476 mm(3)
- 0.5 mm(8)
- 0.525 mm(1)
- 0.576 mm(10)
- 0.65 mm(1)
- 0.701 mm(4)
- 0.775 mm(8)
- 0.8 mm(84)
- 0.826 mm(1)
- 0.9 mm(10)
- 0.925 mm(2)
- 1.0 mm(9)
- -1.0 mm(2)
- 1.201 mm(84)
- 1.25 mm(8)
- 1.5 mm(8)
- 1.576 mm(20)
- 1.6 mm(56)
- 1.75 mm(8)
- 1.975 mm(8)
- 2.0 mm(10)
- 2.25 mm(10)
- 2.375 mm(8)
- 2.401 mm(30)
- 2.5 mm(2)
- 3.176 mm(4)
- 3.2 mm(8)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (46)
- 241 (12)
- CL4 (32)
- CM2 (44)
- CM3 (34)
- CM4 (28)
- CPX (42)
- CW2 (30)
- GH1 (8)
- GX (16)
- HT2 (54)
- HTX (50)
- K00331 (4)
- K060 (24)
- K090 (46)
- K1 (16)
- K1010P (8)
- K10M (74)
- K10P (60)
- K10U (66)
- K15U (66)
- K20K (66)
- K21 (26)
- K25M (60)
- K25P (52)
- K2885 (8)
- K313 (92)
- K35P (28)
- K420 (49)
- K45 (30)
- K4H (8)
- K68 (91)
- KB1340 (16)
- KB1345 (48)
- KB1610 (50)
- KB1625 (44)
- KB1630 (44)
- KB5610 (44)
- KB5625 (62)
- KB5630 (38)
- KB9610 (62)
- KB9640 (16)
- KBH10 (60)
- KBH10B (36)
- KBH20 (69)
- KBH20B (36)
- KBK35 (12)
- KC210 (26)
- KC250 (32)
- KC5010 (101)
- KC5020P (18)
- KC5025 (102)
- KC5410 (86)
- KC5510 (52)
- KC5525 (30)
- KC710 (28)
- KC720 (82)
- KC722 (26)
- KC730 (95)
- KC7310 (54)
- KC732 (74)
- KC8050 (84)
- KC810 (91)
- KC850 (95)
- KC9010 (72)
- KC9025 (86)
- KC910 (84)
- KC9105 (83)
- KC9110 (96)
- KC9120 (78)
- KC9125 (86)
- KC9140 (54)
- KC9145 (36)
- KC9210 (8)
- KC9215 (54)
- KC9225 (86)
- KC9240 (84)
- KC9240NEW (84)
- KC9245 (54)
- KC9315 (86)
- KC9320 (92)
- KC9325 (72)
- KC935 (96)
- KC950 (82)
- KC990 (76)
- KCD25 (28)
- KCK05 (86)
- KCK05B (74)
- KCK15 (76)
- KCK15B (82)
- KCK20 (94)
- KCK20B (92)
- KCM15 (84)
- KCM15B (78)
- KCM25 (86)
- KCM25B (82)
- KCM25S (16)
- KCM35 (76)
- KCM35B (58)
- KCP05 (80)
- KCP05B (52)
- KCP10 (86)
- KCP10B (94)
- KCP15 (4)
- KCP20S (16)
- KCP25 (86)
- KCP25B (94)
- KCP25C (84)
- KCP30 (84)
- KCP30B (50)
- KCP40 (42)
- KCP40B (54)
- KCPK05 (50)
- KCS10 (44)
- KCS10B (78)
- KCS25S (16)
- KCU10 (97)
- KCU10B (97)
- KCU25 (93)
- KCU25B (94)
- KD050 (47)
- KD081 (52)
- KD100 (31)
- KD120 (40)
- KD1400 (56)
- KD1405 (22)
- KD1425 (64)
- KM1 (24)
- KMF (12)
- KN10S (18)
- KS15 (12)
- KT1120 (16)
- KT125 (46)
- KT150 (28)
- KT175 (68)
- KT315 (88)
- KT325 (64)
- KT5020 (14)
- KTP10 (70)
- KTP25S (64)
- KU10 (24)
- KU10T (84)
- KU25T (14)
- KU30T (92)
- KY1310 (30)
- KY1320 (46)
- KY1540 (18)
- KY1615 (46)
- KY2000 (32)
- KY2100 (14)
- KY3000 (56)
- KY3400 (34)
- KY3500 (46)
- KY4000 (22)
- KY4300 (22)
- KY4400 (46)
- KYHK15B (46)
- KYK10 (24)
- KYK25 (34)
- KYK35 (46)
- KYS25 (16)
- KYS30 (16)
- NL200 (20)
- NL250 (50)
- NL300 (42)
- NL400 (20)
- NL920 (38)
- P25 (14)
- PS5 (24)
- SP0819 (40)
- SP3019 (32)
- SP4019 (28)
- SP4036 (4)
- SP4093 (4)
- SPADAP (2)
- TN7035 (10)
- X00511 (12)
- X00580 (12)
- X00581 (12)
- X00582 (12)
- X00583 (12)
- X00584 (12)
- X00585 (12)
- X00586 (12)
- X00591 (12)
- X00592 (12)
- X00593 (12)
- X00594 (12)
- X00596 (12)
- X00597 (12)
- X00599 (12)
- YY3A00 (2)
Hand Of Tool
Hand Of Tool
- L (47)
- R (57)
Wiper Insert
Wiper Insert
- N (104)
- Y (44)
F Dimension
F Dimension
- 17.0 mm(20)
- 18.276 mm(1)
- 22.0 mm(21)
- 23.0 mm(2)
- 23.276 mm(1)
- 27.0 mm(27)
- 28.276 mm(1)
- 28.675 mm(1)
- 35.0 mm(27)
- 36.275 mm(1)
- 36.676 mm(1)
- 36.975 mm(1)
to
F Dimension
F Dimension
- 0.669 in(20)
- 0.72 in(1)
- 0.866 in(21)
- 0.906 in(2)
- 0.916 in(1)
- 1.063 in(27)
- 1.113 in(1)
- 1.129 in(1)
- 1.379 in(27)
- 1.428 in(1)
- 1.444 in(1)
- 1.456 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(19)
- 33.0 mm(2)
- 40.0 mm(24)
- 50.0 mm(29)
- 63.0 mm(30)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.26 in(19)
- 1.299 in(2)
- 1.575 in(24)
- 1.969 in(29)
- 2.48 in(30)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -0.039 in(2)
- 393.661 in(10)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- -1.0 mm(2)
- 9999.0 mm(10)
to
Cutting Direction
Cutting Direction
- B (32)
- E (52)
- P (2)
- S (18)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (61)
- NEGATIVE-ZERO (30)
- NEUTRAL (ZERO) (13)
Maximum Bore Depth
Maximum Bore Depth
- 3.938 in(21)
- 5.039 in(24)
- 6.299 in(29)
- 7.875 in(30)
to
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(21)
- 128.0 mm(24)
- 160.0 mm(29)
- 200.0 mm(30)
to
Boring Bar Material
Boring Bar Material
- S (104)
Front-End
Clamp Style
Clamp Style
- D (28)
- N (11)
- P (26)
- S (39)
Cutting Width
Cutting Width
- 0.039 in(8)
- 0.047 in(8)
- 0.06 in(8)
- 0.062 in(8)
- 0.069 in(8)
- 0.073 in(8)
- 0.078 in(8)
- 0.079 in(8)
- 0.088 in(8)
- 0.089 in(5)
- 0.094 in(3)
- 0.095 in(8)
- 0.097 in(8)
- 0.098 in(8)
- 0.105 in(8)
- 0.108 in(8)
- 0.11 in(8)
- 0.119 in(10)
- 0.122 in(8)
- 0.125 in(10)
- 0.126 in(10)
- 0.128 in(8)
- 0.131 in(3)
- 0.138 in(10)
- 0.143 in(8)
- 0.156 in(8)
- 0.157 in(10)
- 0.167 in(10)
- 0.169 in(8)
- 0.177 in(10)
- 0.178 in(8)
- 0.185 in(9)
- 0.188 in(10)
- 0.189 in(10)
- 0.192 in(3)
- 0.193 in(3)
- 0.195 in(8)
- 0.196 in(8)
- 0.197 in(2)
- 0.202 in(2)
- 0.213 in(2)
- 0.217 in(2)
- 0.218 in(1)
- 0.219 in(2)
- 0.237 in(2)
- 0.25 in(3)
- 0.256 in(2)
- 0.281 in(1)
- 0.312 in(1)
- 0.375 in(1)
- 0.384 in(1)
to
Cutting Width
Cutting Width
- 1.0 mm(8)
- 1.201 mm(8)
- 1.5 mm(8)
- 1.576 mm(8)
- 1.75 mm(8)
- 1.826 mm(8)
- 1.975 mm(8)
- 2.0 mm(8)
- 2.2 mm(8)
- 2.225 mm(8)
- 2.25 mm(5)
- 2.375 mm(3)
- 2.401 mm(8)
- 2.475 mm(8)
- 2.5 mm(8)
- 2.676 mm(8)
- 2.75 mm(8)
- 2.801 mm(8)
- 3.0 mm(10)
- 3.1 mm(8)
- 3.176 mm(10)
- 3.2 mm(10)
- 3.25 mm(8)
- 3.325 mm(3)
- 3.5 mm(10)
- 3.6 mm(8)
- 3.95 mm(8)
- 3.975 mm(3)
- 4.0 mm(10)
- 4.25 mm(10)
- 4.3 mm(8)
- 4.5 mm(10)
- 4.525 mm(8)
- 4.7 mm(9)
- 4.775 mm(10)
- 4.801 mm(10)
- 4.875 mm(3)
- 4.9 mm(3)
- 4.95 mm(8)
- 4.976 mm(8)
- 5.0 mm(2)
- 5.125 mm(2)
- 5.4 mm(2)
- 5.5 mm(2)
- 5.525 mm(1)
- 5.575 mm(2)
- 6.0 mm(2)
- 6.351 mm(3)
- 6.5 mm(2)
- 7.125 mm(1)
- 7.926 mm(1)
- 9.525 mm(1)
- 9.75 mm(1)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (26)
- D-DIAMOND/RHOMBIC 55 (28)
- LT-TRIANGLE LAY DOWN THREAD 60 (7)
- T-TRIANGLE 60 (18)
- TN-TOP NOTCH (11)
- V-DIAMOND/RHOMBIC 35 (10)
- W-TRIGON 80 (4)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.098 in(2)
- 0.11 in(2)
- 0.13 in(2)
- 0.146 in(2)
- 0.178 in(4)
- 0.193 in(2)
- 0.197 in(1)
- 0.238 in(4)
- 0.277 in(8)
- 0.395 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 2.5 mm(2)
- 2.801 mm(2)
- 3.301 mm(2)
- 3.7 mm(2)
- 4.525 mm(4)
- 4.9 mm(2)
- 5.0 mm(1)
- 6.025 mm(4)
- 7.025 mm(8)
- 10.025 mm(12)
to
Gage Length
Gage Length
- 18 in(2)
- 10 in(1)
- 16 in(1)
- 8 in(1)
- 7.945 in(1)
- 9.843 in(1)
- 11.811 in(1)
- 12.015 in(1)
- 13.781 in(1)
- 14.015 in(1)
Gage Length
Gage Length
- 250 mm(1)
- 254 mm(1)
- 300 mm(1)
- 350 mm(1)
- 201.8 mm(1)
- 203.201 mm(1)
- 305.151 mm(1)
- 355.951 mm(1)
- 406.401 mm(1)
- 457.201 mm(2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (72)
- B L (76)
- C A (46)
- C N (56)
- D P (73)
- H T (88)
- H W (104)
Back-End
Connection Type
Connection Type
- BORING BAR HEAD (104)
Back-End Diameter
Back-End Diameter
- 25.0 mm(22)
- 25.401 mm(1)
- 31.701 mm(1)
- 32.0 mm(25)
- 38.1 mm(1)
- 40.0 mm(30)
- 44.401 mm(1)
- 50.0 mm(31)
- 50.801 mm(1)
- 63.5 mm(1)
- 76.2 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.984 in(22)
- 1.0 in(1)
- 1.248 in(1)
- 1.26 in(25)
- 1.5 in(1)
- 1.575 in(30)
- 1.748 in(1)
- 1.969 in(31)
- 2.0 in(1)
- 2.5 in(1)
- 3.0 in(1)
to
No filters matching ""
